• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.446-448
• /
• 1995

This paper dscribes a detail simulation model with EMTP (Electro-Magnetic Transients Program) which is very effective to analyze the interaction between the ac transmission line and STATCON (static condenser). The SATCON was represented by two voltage-source converters connected in parallel and sharing an energy storage dc capacitor bank. The voltage source converters was modeled with ideal gate turn-off switches. The power system was represented by a detail generator model and a distributed tramnsmission line model for detail performance analyses. Analysis results show that the conceived simulation model is very effective to analyze the interaction between the ac transmission line and STATCON, and to evaluate the performance of STATCON.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1647-1656
• /
• 2013

Although the demand for electricity has been increasing these days, it becomes more difficult to find new sites for large-scale power generation plants near urban areas due to environmental and economic issues. Therefore, new power plants are forced off to rural or desolate coastal areas. As a result, there is significant regional imbalance in power generation and consumption between urban and rural areas in South Korea. This paper investigates the feasibility of high-voltage DC (HVDC) system as a candidate for electric power transmission system from east-coastal sites to metropolitan area. To this end, this paper analyzes transient stability and dynamic impact of a HVDC transmission system and compares the results to conventional high-voltage AC (HVAC) transmission systems via PSS/E simulation. This paper also examines the effect of HVDC system to voltage variation and low-frequency resonance in the neighboring buses in the grid using ESCR(Effective Short Circuit Ratio)과 UIF(Unit Interaction Factor) indices.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.158-163
• /
• 2005

Competitive electricity markets necessitate equitable methods for allocating transmission usage in order to set transmission usage charges and congestion charges in an unbiased and an open-accessed basis. So in competitive markets it is usually necessary to trace the contribution of each participant to line usage, congestion charges and transmission losses, and then to calculate charges based on these contributions. A UPFC offers flexible power system control, and has the powerful advantage of providing, simultaneously and independently, real-time control of voltage, impedance and phase angle, which are the basic power system parameters on which sys-tem performance depends. Therefore, UPFC can be used efficiently and flexibly to optimize line utilization and increase system capability and to enhance transmission stability and dampen system oscillations. In this paper, a mathematical approach to allocate the contributions of system users and UPFCs to transmission system usage is presented. The paper uses a dc-based load flow modeling of UPFC-inserted transmission lines in which the injection model of the UPFC is used. The relationships presented in the paper showed modified distribution factors that modeled impact of utilizing UPFCs on line flows and system usage. The derived relationships show how bus voltage angles are attributed to each of changes in generation, injections of UPFC, and changes in admittance matrix caused by inserting UPFCs in lines. The relationships derived are applied to two test systems. The results illustrate how transmission usage would be affected when UPFC is utilized. The relationships derived can be adopted for the purpose of allocating usage and payments to users of transmission network and owners of UPFCs used in the network. The relationships can be modified or extended for other control devices.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.355-363
• /
• 2015

HVDC technology has become popular as an economic mode of bulk power transmission over very long distances. Polymeric insulators in HVDC power transmission lines are affected by surface tracking and erosion problems due to contamination deposit, which pose a greater challenge in maintaining the reliability of the HVDC system. In addition, polymeric insulators are also naturally affected by aging due to various environmental stresses, which in turn accelerates the surface tracking and erosion problems. Research works towards the improvement of tracking and erosion resistance of polymeric insulators by adding nano-sized fillers in the base material are being carried out worldwide. However, surface tracking and erosion performance of nano-filled aged polymeric insulators for HVDC applications are not well reported. Hence, in the present work, tracking and erosion resistance of the nano $Al(OH)_3$ filled silicone rubber insulation material has been evaluated under DC voltages at different filler concentrations and aged conditions, as per IEC 60587 test procedures. Leakage current and contact angle measurements were carried out to understand the surface hydrophobicity. Moving average technique was used to analyze the trend followed by leakage current. Water aged specimen shows less tracking resistance when compared with thermal aged specimen. It is observed that nano-filler concentration of 5% is even sufficient to get better tracking/erosion resistance under DC voltages.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2412-2420
• /
• 2018

The thermal degradation of low density polyethylene (LDPE) will accelerate the production of carbonyl groups (C=O), which can act as the induced dipoles under high voltage. In this paper, we researched the dielectric properties and space charge behavior of LDPE after thermal aging, which can help us to understand the correlation between carbonyl groups (C=O) and electrical properties of LDPE. The spectra results show that LDPE exhibit obvious thermooxidative reactions when the aging time is 35 days and the productions mainly contain carboxylic acid, carboxylic eater and carboxylic anhydride, whose amount increase with the increasing of aging time. The dielectric properties show that the real permittivity of LDPE is inversely proportional to temperature before aging and subsequently become proportional to temperature after thermal aging. Furthermore, both the real and imaginary permittivity increase sharply with the increasing of aging time. The fitting results of imaginary permittivity show that DC conductivity become more sensitive about temperature after thermal aging. On this basis, the active energies of materials calculated from DC conductivity increase first and then decrease with the increasing of aging time. In addition, the space charge results show that the heterocharges accumulated near electrodes in LDPE change to the homocharges after thermal aging and the mean volume charge density increase with the increasing of aging time. It is considered that the overlaps caused by electrical potential area is the main reason for the increase of DC conductivity.

• 한국자기학회지
• /
• 제13권5호
• /
• pp.216-220
• /
• 2003

본 연구에서는 MRAM(magnetic random access memory)이 10 GHz까지 높은 주파수에서 동작할 때 쓰기 신호와 읽기 신호가 얼마나 효율적으로 전달되는지 계산하였다. 이를 위해 읽기와 쓰기에 필요한 도선이 있는 시편을 3차원으로 모델링하였다. 모의실험은 쓰기 동작과 읽기 동작으로 나눠서 수행되었고, FEM(finite element method) 알고리즘을 이용하여 S-parameter를 출력하였다. 계산된 결과를 이용하여 실험적으로 설계된 MRAM 시편의 쓰기와 읽기 동작에서 전송계수 S$_{21}$을 각각 DC에서 1 GHz 그리고 100 GHz 까지의 영역에서 해석하였다. 또한 각각의 길이가 600 $\mu$m인 bit line과 sense line사이의 절연체 두께를 500에서 1500$\AA$으로 변화시켰을 때, 3 dB 감쇄 주파수를 135에서 430 MHz까지 약 3.3배 높일 수 있었다. 그리고 계산된 S-parameter를 이용하여 전달 지연을 계산하여 접근시간을 예측하였다.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1140-1149
• /
• 2019

전압형 컨버터의 다양한 전압 합성 방법을 구현하기 위해서, 옵셋 전압을 주입하는 방법이 널리 사용되고 있다. 즉, 전압 변조 방식(pulse width modulation; PWM)들은 교류 측 전압 지령에 적절한 옵셋 전압을 주입하는 것과 수학적으로 동일하다. 이러한 옵셋 전압을 이용한 AC 단 출력 전압 합성 방법에 따라 DC 단 전압의 전압 이용률이 달라지며, 이는 모듈형 다단 컨버터(modular multilevel converter; MMC) 시스템에서도 동일하다. 따라서, DC 단의 용량이 정해져 있는 고압 직류(high voltage DC; HVDC) 송전 시스템의 경우에도 AC 단에 옵셋 전압을 이용함에 따라 AC 단으로 공급 가능한 최대 무효 전력의 크기를 변화시킬 수 있다. 본 논문에서는 대표적인 전압 변조 방식을 적용한 옵셋 전압 주입 시 합성된 AC 측 출력 전압에 따라 MMC 시스템의 레그 에너지 맥동을 수학적으로 분석하였다. 또한, 이를 실제 스케일의 400MVA급 MMC 시스템 시뮬레이션을 통해 수학적 분석의 경향성을 검증하였다.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.758-763
• /
• 2014

These days, the advantages of DC power system are consistently stand out in korea that was a small power loss and high stability. Needs of DC power transmission technology is focused In the midst of a smart grid and environment friendly generation technology boom that is needed for next generation technology. Researches and businesses for HVDC(High Voltage Direct Current) system has been began. But, Needs of HVDC equipment and system commissioning technology are not on the rise until now. In particular, South Korea's HVDC technology is after the foot runner of advanced country and company. In addition, There is no experience for equipment verification and commissioning technology. And Experts of HVDC are rare. Who has been fully understood hardware and system as a whole, and identified all the equipment's characteristic. Recently, Academia and industry are recognized a needs of HVDC technology. But it does not received a recognition of technical value. In this paper, introduce issues when we apply the IEEE's verification method for HVDC system, especially DC current measurement system, DC CT(Direct Current Transformer), among the HVDC equipments. And Proposes remedial methods on the issue in order to recognize the necessity that was HVDC equipments's verification and commissioning technology research should be focused on.

• 한국ITS학회 논문지
• /
• 제8권6호
• /
• pp.64-72
• /
• 2009

본 논문에서는 마이크로스트립 패치 안테나와 2차 및 3차 고조파가 억압된 이중모드 대역통과 여파기를 이용하여 고효율의 2.45 GHz 렉테나를 설계 및 제작하였다. 입사전력밀도가 0.3 mW/cm2 일 때 1.66 mW 의 전력을 수신하였고, 41.6%의 RF-to-DC 변환효율의 실험 결과를 얻었다. 이는 입사 전력이 작기 때문에 다른 논문의 결과와 비교하여 고효율이라고 볼 수 있다. 또한 무선전력 전송을 통하여 다양한 응용기술 개발에 활용이 가능할 것으로 예측되며, USN(Ubiquitous Sensor Network)용 저전력 소자의 대기전원 공급 및 MEMS용 Sensor 등의 구동전압공급을 위한 무선 전력전송이 가능하게 될 것으로 기대된다.

• 식물조직배양학회지
• /
• 제22권6호
• /
• pp.323-327
• /
• 1995

미나리의 체세포 배발생 과정을 해부학적으로 구명하기 위하여 배발생 기원세포와 캘러스를 광학현미경 및 전자현미경으로 관찰한 결과, 배발생 세포는 hematoxylin에 짙은 보라색으로, 비배발생 세포는 safranin에 적색으로 염색되어 광학현미경하에서 쉽게 구별할 수 있었다. 배발생 캘러스는 많은 수의 원배 및 발육중인 배, 비배발생 세포 등으로 구성되어 있었다. 체세포 배발생은 발육 중인 배나 세포괴의 표피세포에 위치한 배발생 세포의 하나가 분열하거나 세포괴내의 비배발생 세포속에 묻혀 있는 배발생 세포가 분열하여 일어났다. 배발생 과정은 항상 일정한 형태는 아니지만 단세포로부터 일정한 segmentation 과정를 거쳐서 배발생이 진행되는 것으로 나타났다. 투과전자현미경에 의한 관찰에서 배발생 세포는 비배발생 세포에 비하여 세포질이 조밀하고 핵이 대형이며 amyloplast, 인지질체 및 세포소기 관들이 많으며 액포가 없거나 매우 작았다. 이들 세포들은 두터운 세포벽에 의하여 주위의 비배발생 세포와 분리되어 있으며 세포윤곽은 둥글었다. 주사전자현미경으로 관찰한 배발생캘러스는 외부가 그물이 씌워진 형태의 구형의 다양한 크기의 배들과 비교적 크기가 큰 비배발생 세포들이 혼재하였다. 한편 비배발생능 캘러스는 구성세포가 크고 외부에는 gelatin같은 물질로 덮여 있었다.