• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.858-863
• /
• 1988

A micro-processor based control system for a brushless DC motor used in the motor-driven electromechanical total artificial heart was developed. Functionally, the control system is composed of two parts. The first part is the velocity and position controller to assure that the motor follows a predetermined optimal velocity profile with minimal energy consumption, and to guarantee the full stroke length. This part also utilize the passive adaptive control method to be robust against the load disturbance, system parameter variation, and uncertainty which is the environment of artificial heart system. The pump output control is the second part, and this part provides the required responses of the artificial heart to the time-varying physiologic demands. The basic requirements of these responses are preload sensitivity, afterload insensitivity, and the balanced ventricular outputs. The performance and reliability of this control system was evaluated through a series of mock circulation tests and animal implantation, and the results are very encouraging.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.2
• /
• pp.127-134
• /
• 1995

For use in patients with severe forms of heart disease for which no surgical repair is possible, development of artificial hearts has many importance in point of economics, medical and industrial applications. To provide a sufficient cardiac output to the physiological demands of circulatory systems is the objective of control systems for an electromechanical artificial heart, which is based on the stable controller design for the motor in the artificial heart. In this paper, an implantable microcontroller-based brushless DC motor control system with the implantability, reliability, and stability is introduced. The developed control system for the artificial heart has the following advantages: (1) It is possible to be implanted in a body by realizing the fundamental functions such as a motor speed detection, proportional-intergral control, timer, and PWM generation through a software programming. (2) Thus, the power consumed in the controller is reduced. (3) The reliability and stability are improved through the reduction of electronic parts and line connetions at the controller. The performance of the artificial hearts and control system developed was evaluated through a series of mock circulatory experiments and a reliability test for one and half years. A sheep with the artificial heart and control system was survived for three days.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.303-311
• /
• 2012

An innovative interpretation of the per-unit interior permanent magnet (IPM) machine model known as Design Space is presented in this paper. Based on the proposed Design Space formulation, an effective computation method to predict IPM machine performance factors, such as the current and power factor in a full range of speeds, is proposed. A systematic methodology is summarized, which translates the full speed range machine design procedure into the region determination on the so-called Design Space. The effect of dc-link voltage is also analyzed in a similar manner with the current and power factor. A series of IPM motors have been designed, and a preferred motor is selected with the help of the proposed Design Space Methodology (DSM), which has the best tradeoff between the nominal voltage and the dropped voltage condition. Experiment results show that the selected motor satisfies the machine requirements and all the design constrains, such as the current and back-EMF limitations.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.69-71
• /
• 2003

Switched reluctance machine has much attention because of high efficiency, high power and DC series torque characteristics with a traction drive. But the motor has to have a regenerative mode when it is adopted in an electric vehicle. A current divergence during the regeneration makes difficulties in the control of SRM. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimental tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are executed to verify proposed method.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.296-297
• /
• 2011

Many applications involving induction motors that are controlled using variable frequency drives require the ability to stop quickly. These applications include emergency stops, quick stopping of fans, centrifuges, presses, etc. The technique that is widely accepted in the industry for achieving quick stopping makes use of brake resistors in series with a power semiconductor switch. The switch-resistor combination (brake-unit) is applied across the dc bus. The fastest decelerating time achievable depends on the size of the resistors and the switch employed. In this paper, the authors propose a novel method of achieving quick stopping times without the use of any brake-unit. Experimental test results with and without this method on a large inertia motor-load combination show that the proposed stopping method is able to reduce the stopping time significantly compared to normal decelerated stop without the need for a braking unit.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.46-49
• /
• 2004

Switched Reluctance Motor(SRM) has been researched for its superior characteristics. The SRM drive system has simple mechanical and magnetic structure, and it requires simple power electronic drive circuit. It is to be compatible to wide range adjustable speed drive system because it has the same driving characteristics of DC series motor's, easy control principle and high efficiency characteristics. In this paper, 2 types of excitation strategy are researched. Conventional 1-phase excitation and 2-phase excitation method are compared and tested. Though 1-phase excitation method is robust and has high performance, 2-phase excitation method has some merit in appling power device. Some simulation and test results are foaled with some analysis.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.186-189
• /
• 2004

Switched reluctance machine has much attention because of high efficiency, high power and DC series torque characteristics with a traction drive. But the motor has to have a regenerative mode when it is adopted in an electric vehicle. A current divergence during the regeneration makes difficulties in the control of SRM. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimental tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are executed to verify proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.285-291
• /
• 2003

Switched reluctance machine has much attention as a traction drive because of high efficiency, high power and DC series torque characteristics. But the motor has to have a regenerative mode when it is adopted in electric vehicle and current divergence during the regeneration makes difficulties in the control. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimented tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are excuted to verify the feasibility of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.25-29
• /
• 2001

The BLDCM (Brushless DC Motor) characterized by linear torque to current, and speed to voltage has low acoustic noise, and fast dynamic response. Moreover, it has high power density with high proportion of torque to inertia in spite of small size drive. But, it produce torque ripple due to the motor inductance components in stator windings and back-EMF, when armature current is commutated. Therefore, it is difficult to apply the BLDCM to a precision servo drive system. In this paper is proposed to a new current control algorithm with using fourier series coefficients can minimize torque ripple due to the phase current commutation of BLDCM. Simulation and Experimental results prove the effectiveness the proposed algorithm through comparison with the conventional used unipolar PWM method.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.33-36
• /
• 2001

Torque ripple control of brush less DC motor has been the main issue of the servo drive systems in which the speed fluctuation, vibration and acoustic noise should be minimized. Most methods for suppressing the torque ripples require Fourier series analysis and either the iterative or least mean square minimization. In this paper, the novel approach to achieve the ripple-tree torque control with maximum efficiency based on the d-q-0 reference frame is presented. The proposed method optimize the reference phase current waveforms including even the case of 3 phase unbalanced condition, and the motor winding currents are controlled to follow up the optimized current waveforms by delta modulation technique. As a result, the proposed approach provides a simple and clear way to obtain the optimal motor excitation currents. The validity and practical applications of the proposed control scheme are verified through the simulations and experimental results.