• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.271-273
• /
• 2000

This paper presents the dynamic characteristics Linear DC Motor(LDM) using 3 Dimensional Equivalent Magnetic Circuit Network Method(3-D EMCN) by voltage driven. The movement of mover substitutes for the movement of magnetization in permanent magnet expressed by Fourier series. The Dynamic characteristics are carried out from coupling the electrical circuit equation and mechanical kinetic equation.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.388-395
• /
• 2010

An active boost converter for a single phase SRM using series-parallel connected capacitors is proposed in this paper. The proposed active boost converter has two diodes and one power switch with an anti-parallel diode and one additional boost capacitor. The additional boost capacitor could be series or parallel connected to the dc-link capacitor to produce proper excitation and demagnetization voltage. The proposed active boost converter can easily achieve a fast excitation and demagnetization from the capacitor connection. In this paper, series and parallel connected converters are reviewed, and the detailed operating modes as well as the voltage characteristics of the proposed converter are analyzed. The simulation and experimental results shows the effectiveness of the proposed active boost converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.241-243
• /
• 1999

This paper describes a series of experiments investigating the operational characteristics of high-Tc superconducting synchronous motor of five to six hundred watts capacity. In this experiment, ac 220V stator phase voltage and DC 4A excitation current are used, and the synchronous speed runs at 1800rpm. Hall Sensors are installed on the pole face and at the side of the Ag/Bi-2223 high-Tc superconducting tape in order to analyze the effect of the time-varying magnetic field on the motor performance when the load changes its value. The experimental observations are compared with the theoretical predictions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.682-686
• /
• 1991

The purpose of a solar tracking system (STS) is to control the attitude of a space vehicle so that it will track the sun with high accuracy. In this paper, the literature of tracking of the sun in a plane is surveyed and a control modeling for the analysis of STS is presented by simultaneous transfer functions and state-space equations. Also a program for obtaining state variables by the single term Walsh series(STWS) approach is developed. The proposed approach is much simpler in analysis and easier in implementation than the Runge-Kutta numerical integration Method. The results of computer simulation are shown for the dynamic behaviors of vehicle axis, armature-controlled dc motor and controller of STS via a Runge-Kutta method and a single term Walsh series approach, respectively.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.411-418
• /
• 2015

In this paper, a new method for the online estimation of equivalent series resistances (ESR) of the DC-link capacitors in induction machine (IM) drive systems with a front-end diode rectifier is proposed, where the ESR estimation is conducted during the regenerative operating mode of the induction machine. In the first place, a regulated AC current component is injected into the q-axis current component of the induction machine, which induces the current and voltage ripple components in the DC-link. By processing these AC signals through digital filters, the ESR can be estimated by a recursive least squares (RLS) algorithm. To acquire the AC voltage across the ESR, the DC-link voltage needs to be measured at a double sampling frequency. In addition, the ESR current is simply reconstructed from the stator currents and switching states of the inverter. Experimental results have shown that the estimation error of the ESR is about 1.2%, which is quite acceptable for condition monitoring of the capacitor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.243-245
• /
• 2000

In general, aluminum electrolytic capacitors are used in the DC link of PWM inverters fur ac motor drives. The capacitor usually has the shortest lifetime in the system and then determines the lifetime of the inverter system. In this paper, a method of capacitor lifetime estimation is proposed by using an ESR(equivalent series resistance) model and a heat transfer model of capacitor, from which internal operating temperature is estimated. Then, the lifetime is predicted by Arrhenius's equation. A practical example is presented.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.117-122
• /
• 2018

대용량 3상 시스템 에어컨은 최근 들어 소비 전력 저감을 위해 인버터 회로를 포함하고 있다. 인버터 회로는 교류를 다이오드를 통해 정류하고 DC-link 전원부 콘덴서에 의해 평활된 직류를 사용한다. 이 때 평활에 사용되는 DC-link 전원부 콘덴서는 전압 리플, 전류 리플 조건을 만족하기 위해 전해 콘덴서가 일반적으로 사용된다. 콘덴서의 용량을 줄이게 되면 회로부의 크기 및 무게, 비용을 줄일 수 있게 된다. 본 논문에서는 최소점 추정 PPL(Phase Locked Loop) 위상 제어와 평균 전압 d축 전류제어 기법을 조합하여 입력 리플 전류를 약 90% 저감하는 알고리즘을 제안한다. 입력 리플 전류의 감소로 인해 DC-link 콘덴서의 전류 리플도 감소하므로 콘덴서의 용량을 줄일 수 있지만 전해 콘덴서의 경우 등가 직렬 저항(ESR : Equivalent Series Resistance)이 크기 때문에 발열로 인한 수명이 한계를 가진다. 본 논문에서는 전해 콘덴서 대신 DC-link 단에 전류 리플을 고려한 필름 콘덴서를 선정하는 방법을 제안한다. 필름 콘데서의 정전 용량 선정, 내압 선정, RMS(Root Mean Square) 전류 용량, RMS 전류 주파수 해석을 고려해 콘덴서의 용량을 선정할 경우 1680uF의 전해 콘덴서를 20uF로 용량을 낮추어 설계함으로써 전원부 콘덴서의 크기 및 무게, 비용을 줄였으며 전동기 구동을 통해 동작을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.172-178
• /
• 2012

이동식 발전설비는 이송이나 설치의 편리성과 산간지역이나 도서지역 등의 전력 공급이 어려운 지역에서도 사용할 수 있는 장점을 갖고 있다. 하지만 기존의 이동식 발전설비는 공기식 시동시스템에 의해 기동 되므로 공기 압축기 및 탱크시스템 등이 필요하다. 이러한 장치의 추가로 공기시동시스템은 비용 및 용적률 측면에서 손실이 발생하고 에너지 효율이 감소하게 된다. 본 연구에서는 공기식 시동시스템의 단점을 개선하기 위해서 에너지 효율의 증가, 부피와 용적률 및 비용의 절감, 안전사고의 위험성 감소, 시동의 정확성 증가 및 시동시간의 감소 효과를 기대할 수 있는 전기시동전동기인 직류직권전동기를 개발하였다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권6호
• /
• pp.49-56
• /
• 1995

In this study, self-tuning adaptive control using state observer is developed. Self-tuning adaptive controller that estimates the parameters of the system in real time and generates the optimal control signals has robust characteristic about varying load and external disturbances. In addition, state observer without sensors is applied, thus the control can be performed more quickly and exactly. Since chopper is used commonly in practical drives, the characteristics of the chopper are included in state observer algorithm, which, in turn, makes the system exact estimation. Since series type DC motor has nonlinear models, linearizing approach are investigated. to realize the proposed algorithm it requires fast calculation in real time. TMS320C31, digital signal processor, is applied to realized the adaptive control algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2167-2169
• /
• 2003

The LQG regulator presented in this dissertation is designed to improve system stability with the structure in which Kalman Filters and LQ regulator are inter-connected to avoid disturbances on the system. For the sake of performance evaluation of the LQG regulator in this dissertation, the regulator is put in use for the speed control of DC Servo Motors without speed sensors on them to realize speed control without sensors by estimating uncertain speed with its state signals and to construct an optimal controller using the LQG regulator. Furthermore, state estimation process with white noise entered onto the systems is been experimented through a series of simulation. As a consequence, the process of estimating speed signals out of the signals with white noise inputs is confirmed using Kalman Filter.