• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.339-346
• /
• 2015

Aerodynamic flow control phenomena were investigated with a low-current DC surface discharge plasma actuator. The plasma actuator was found to operate in three different discharge modes with similar discharge currents of about 1 mA or less. Stable continuous DC discharge without audible noise was obtained at higher ballast resistances and lower discharge currents. However, even with continuous DC power input, a low-frequency self-pulsed discharge was obtained at lower ballast resistances, and a high-frequency self-pulsed discharge was obtained at higher set-point currents and higher ballast resistances, both with audible noise. The Schlieren image reveals that the low-frequency self-pulsed mode produces a synthetic jet-like flow implying that a gas heating effect plays a role, even though the discharge current is small. The high-frequency self-pulsed mode produces pulsed jets in a tangent direction, and the continuous DC mode produces a steady straight pressure wave. Particle image velocimetry (PIV) images reveal that the induced flow field by the low-frequency self-pulsed mode has flow propagating in the radial direction and centered between the electrodes. The high-frequency self-pulsed mode and continuous DC mode produce flow from the anode to the cathode. The perturbed region downstream of the cathode is larger in the high-frequency self-pulsed mode with similar maximum speeds.

• Structural Engineering and Mechanics
• /
• v.42 no.5
• /
• pp.677-699
• /
• 2012

This article studies the secondary resonances of a clamped-clamped microresonator under combined electrostatic and piezoelectric actuations. The electrostatic actuation is induced by applying the AC-DC voltage between the microbeam and the electrode plate that lies at the opposite side of the microbeam. The piezoelectric actuation is induced by applying the DC voltage between upper and lower sides of piezoelectric layer. It is assumed that the neutral axis of bending is stretched when the microbeam is deflected. The drift effect of piezoelectric layer (the phenomenon where there is a slow increase of the free strain after the application of a DC field) is neglected. The equations of motion are solved by using the multiple scale perturbation method. The system possesses a subharmonic resonance of order one-half and a superharmonic resonance of order two. It is shown that using the DC piezoelectric actuation, the sensitivity of AC-DC electrostatically actuated microresonator under subharmonic and superharmonic resonances may be tuned. In addition, it is shown that the tuning domain of the microbeam under combined electrostatic and piezoelectric actuations at subharmonic and superharmonic conditions is larger than the tuning domain of microbeam under only the electrostatic actuation.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.240-249
• /
• 2018

Individual DC voltage balance problem is an inherent issue for cascaded H-bridge (CHB) based converter. When the CHB-based static synchronous compensator (STATCOM) is operating at zero current mode, the software-based individual DC voltage balancing control techniques may not work because of the infinitesimal output current. However, the different power losses of each cell would lead to the individual DC voltages unbalance. The uneven power losses on the local supplied cell-controllers (including the control circuit and drive circuit) would especially cause the divergence of individual DC voltages, due to their characteristic as constant power loads. To solve this problem, this paper proposes an adaptive voltage balancing module which is designed in the cell-controller board with small size and low cost circuits. It is controlled to make the power loss of the cell a constant resistance load, thus the DC voltages are balanced in zero current mode. Field test in a 10kV STATCOM confirms the performance of the proposed method.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.123-127
• /
• 2014

We developed a digital 3-axis flux-gate magnetometer for magnetic field signal measurement from warship during demagnetizing and degaussing processes. For the magnetometer design, we considered following points; the distance between magnetic field measurement station and magnetometer located under sea is about several 100 m, the magnetometer is exposed to magnetic field of ${\pm}1mT$ during demagnetizing process, and magnetometer is located under the sea about 30 m depth. To overcome long distance problem, magnetometer could be operated on wide input supply voltage range of 16~36 V using DC/DC converter, and for the data communication between the magnetometer and measurement station a RS422 serial interface was employed. To improve perming effect due to the ${\pm}1mT$ during demagnetizing process, magnetometer could be compensated external magnetic field up to ${\pm}1mT$ but magnetic field measuring rang is only ${\pm}100{\mu}T$. The perming effect was about ${\pm}2nT$ under ${\pm}1mT$ external magnetic field. The magnetometer was tested water vessel with air pressure up to 6 bar for the sea water pressure problems. Linearity of the magnetometer was better than 0.01 % in the measuring range of ${\pm}0.1mT$ and noise level was $30pT/\sqrt{Hz}$ at 1 Hz.

• Korean Journal of Veterinary Research
• /
• v.33 no.3
• /
• pp.547-554
• /
• 1993

This study was carried out to investigate the best condition for in vitro and in vivo culture after freezing and thawing of nuclear transplant 2 cell embryos. When nuclear transplant embryos were submitted to electrofusion, the significantly higher fusion rates of 2 cell donor nuclei were achieved at the electric field strength of DC 1.5 kV/cm for 100 and $150{\mu}sec$, DC 2.0 kV/cm for 100 and $150{\mu}sec$ than DC 1.0 kV/cm for 100 and $150{\mu}sec$(p<0.01). The significantly higher fusion rates of 4 cell donor nuclei were achievecl at DC 2.0 kV/cm for 100 and $150{\mu}sec$ than DC 1.0 kV/cm for 100 and $150{\mu}sec$(p<0.01). The fusion rates in 8 cell donor nuclei were 94.2~99.3%. The developmental potency to blastocyst in 2 cell donor nuclei was significantly higher in DC 2.0 kV/cm for $150{\mu}sec$ treated group(p<0.01). The significantly higher developmental potency to blastocyst in 4 cell donor nuclei were achieved at the electric field strength of DC 2.0 kV/cm for $150{\mu}sec$ than DC 1.5 kV/cm for 100 and $150{\mu}sec$, DC 2.0 kV/cm for $100{\mu}sec$ treated group(p<0.01). The develop mental potency to blastocyst in 8 cell donor nuclei was significantly higher in DC 2.0 kV/cm for $100{\mu}sec$ treated group(p<0.01). The developmental potency to blastocyst after nuclear transplantation was significantly higher in 2 cell donor nuclei than in 8 cell donor nuclei(p<0.01). When the recovered embryos in normal morphology were cultured in vitro, there were no significant differences in the developmental potency to blastocyst between the freezing methods and the concentrations of cryoprotectant(p<0.01). The production rates of offspring after transfer of nuclear transplant embryos to recipient mouse were no significant difference in 2, 4 and 8 cell donor nuclei.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.415-418
• /
• 2005

To understand effects of carbon nanotubes (CNTs) dispersed in nematic liquid crystal (NLC) on electro-optic characteristic and orientation of the LC, we CNT-doped homogeneously-aligned NLC cells driven by in-plane field have been fabricated. The CNTs were aligned with a LC director from the initial state to below critical ac field, whereas the CNTs disturbed the LC director field above critical ac field. We observed motional textures in the form of vertical stripes in the local area between electrodes, which were associated with a deformation of the LC director orientation. This indicates that CNTs start vibrating three dimensionally with translational motion. Further, the hysterisis studies of voltage-dependent transmittance under dc electric field show that the amount of residual dc, which is related to image sticking problem in liquid crystal displays, is greatly reduced due to ion trapping by CNTS while keeping operating voltage and response time about the same compared to the un-doped LC cell.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.193-193
• /
• 2010

HIPIMS(High sputtering impulse magnetron sputtering)은 수십 ${\mu}s$의 짧은 pulse 동안 수kw의 매우 높은 파워를 인가할 수 있어 밀도 $10^{13}/cm^3$ 이상의 고밀도 플라즈마 방전이 가능하여 스퍼터된 타겟 이온들의 이온화율이 매우 높은 특징을 가진다. HIPIMS를 통해 증착한 박막의 경우 매우 치밀한 조직을 가지고 있어 기존 DC, Pulsed DC, RF 증착을 통한 박막에 비해 우수한 물성을 보여준다. 본 실험에서는 대면적의 고품위 Al:ZnO 박막을 증착하기위하여 HIPIMS 증착법을 사용하였다. 1000mm폭 타겟상에서 균일한 증착을 위하여 Balanced B-field, Unbalanced field를 각각 인가하여 실험하였다. 시뮬레이션을 통하여 타겟 중심부와 가장자리의 자기장을 결정하였으며, target edge에서의 증착율과 cathode erosion 방지를 위하여 원형 트랙형으로 보조 자석을 설치하였다. $Al_2O_3$(2wt%)가 첨가된 planar target을 사용하였고, power는 700 W~2 kW, 그리고 pulse 폭은 $50-150 {\mu}s$정도로 변화시켜 가면서 상온에서 증착하였다. 플라즈마 가스로는 Ar만을 사용하여 두께는 60-100 nm정도로 증착하였다. Plasma emission monitoring을 통해 측정한 결과 Balanced B-field 에 비해 Unbalanced B-field 조건 에서 스퍼터된 이온들의 균일도가 우수하였으며 증착된 박막의 균일도 또한 증가하였다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.567-569
• /
• 1995

By using the ac field source which can change the applied field magnitude, frequency and dc offset field, the dynamic magnetoresistance characteristics of permalloy based multilayers which have different R-H(resistance-magnetic field) curves were monitored and compared with static magnetoresistance curves that were measured with electromagnet of VSM. Output of each sample according to the external field strength was identified and optimum bias position could be obtained.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2999-3004
• /
• 2010

In comparison with some other light sources, LED has merits such as long lifetime, pollution free, and high energy efficiency. Lately, due to development of LED with high brightness and capacity, LED, which has been applied in display system only, has applied in the field of lighting system. As power LED for lighting system can be burned out by heat problem, the driving current of power LED has to be controlled below the designed value. In this paper, power LED photovoltaic lighting system, which has the current limitting function, has been described. After photovoltaic power is generated from PV panel. it is charged into a battery. And then, after the charged power is converted to DC24[V] through a boost DC-DC converter, it is supplied to power LED at night. It has been validated by designing and testing of 72[W] power LED lighting system, which includes a PV charger, a boost DC-DC converter and a current limiter for driving power LED.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1125-1131
• /
• 2013

Wireless power transmission technology has been studied variety. Recently, wireless power transmission technology used by resonance and magnetic induction field is applied to various fields. However, magnetic resonance and inductive coupling are have drawbacks - power transmission distance is short. Microwave transmission and accept techniques have been developed to overcome short distance. However, improvement in efficiency is required. This paper, propose a high-efficiency microwave energy acceptor IC(EAIC). Suggested EAIC is consists of RF-DC converter and DC-DC converter. Wide Input power range is -15 dBm ~ 20 dBm. And output voltage is boosted up to 5.5 V by voltage boost-up circuit. EAIC can keep the output voltage constant. Available efficiency of RF-DC converter is 95.5 % at 4 dBm input. And DC-DC efficiency is 94.79 % at 1.1 mA load current. Fully EAIC efficiency is 90.5 %.