• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.746-752
• /
• 2010

Rib structure has been used to bed and column of machine tool to heighten weight stiffness ratio, cost performance and weight saving. In this paper the bed rib structure was estimated with thermal characteristics. Using superposition principle, machine tool designer can describe every complicated heat generation in the machine tool thermal source. As thermal characteristics, thermal deformation of guide rail and column and Maximum-minimum temperature variation were selected. The size, configuration and direction against the thermal loading surface operated to the thermal characteristics. The DB chart was made following rib structure estimating thermal characteristics. With superposition principle and DB chart, machine tool designer can prognosticate the thermal characteristics without FEM analysis to every bed rib structure.

• Transactions of Materials Processing
• /
• v.28 no.1
• /
• pp.15-20
• /
• 2019

The superplastic forming/diffusion bonding process has been developed to fabricate a core frame structure with joint nodes out of tubes, for the development of a titanium high performance bicycle. The hydroforming process has been applied for bulging of a tube in the superplastic condition before, and during the diffusion bonding process. In this experiment, a commercial Ti-3Al-2.5V tube was selected as raw material for the study. The forming experiment has been performed using a servo-hydraulic press with a capacity of 200 ton. Next, nitrogen gas was used to acquire necessary pressure for the bulging and bonding of the tubes to fabricate the joint nodes. The pertinent processing temperature was $870^{\circ}C$ for the superplastic hydroforming/diffusion bonding (SHF/DB) process, using the Ti-3Al-2.5V tube. The bonding quality and the progress of bulging and diffusion bonding have been observed by the investigation of the joining interfaces at the cross section of the joint structure. The control of the nitrogen pressure throughout the SHF/DB process, was an important factor to avoid any significant defects in the joint structure. The whole progress stage of the diffusion bonding could be observed at a joint interface. A core structure with 5 joint nodes to manufacture a titanium bicycle could be obtained in a SHF/DB process.

• Journal of KIISE
• /
• v.44 no.1
• /
• pp.1-12
• /
• 2017

The continuously growing internet service requirements has resulted in a multitier system structure consisting of web server and database (DB) server. In this multitier structure, the existing intrusion detection system (IDS) detects known attacks by matching misused traffic patterns or signatures. However, malicious change to the contents at DB server through hypertext transfer protocol (HTTP) requests at the DB server cannot be detected by the IDS at the DB server's end, since the DB server processes structured query language (SQL) without knowing the associated HTTP, while the web server cannot identify the response associated with the attacker's SQL query. To detect these types of attacks, the malicious user is tracked using knowledge on interaction between HTTP request and SQL query. However, this is a practical challenge because system's source code analysis and its application logic needs to be understood completely. In this study, we proposed a scheme to find the HTTP request associated with a given SQL query using only system log files. We first generated an HTTP request-SQL query map from system log files alone. Subsequently, the HTTP request associated with a given SQL query was identified among a set of HTTP requests using this map. Computer simulations indicated that the proposed scheme finds the HTTP request associated with a given SQL query with 94% accuracy.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.397-406
• /
• 2009

We have fabricated source-drain electrodes for OTFTs using a screen-printing technique with carbon-black pastes as conductive paste. And effects of dispersants contents (SOP 10-40%) on the dispersity of carbon-black pastes and characteristics of screen-printed source-drain electrodes for OTFTs using two types of dispersants (DB-2150, DB-9077) were investigated. As contents of both dispersants were increased the dispersity of carbon-black mill-bases was improved, whereas the carbon-black pastes exhibited different dispersion characteristics. For the case of DB-2150, the dispersity of the pastes was improved with increasing dispersant content and the storage modulus G' in their rheology characteristics were reduced. But, for the DB-9077, the storage modulus G' of pastes were increased with dispersant content due to the flocculated network structure formed by interactions among carbon-black powders and dispersants. But, since this flocculated network structure of the pastes using DB-9077 resulted in the conduction path of carbon-black structures, the conductivities of screen-printed electrodes and mobilities of the OTFTs with them were better than those using pastes with DB-2150.

• MALSORI
• /
• no.47
• /
• pp.51-72
• /
• 2003

The purpose of this paper is to design Speech Database for Korean pronunciation education. For this purpose, I investigated types of speech errors of Korean-learners, made texts for recording, which involves all types of speech errors, and showed how to gather speech data and how to tag their informations. It's natural that speech data should include Korean-learners' speech and Korean people's speech, because Speech DB that I try to develop is for teaching Korean pronunciation to foreigners. So this DB should have informations about speakers and phonetic informations, which are about phonetic value of segments and intonation of sentences. The intonation of sentence varies with the type of sentence, the structure of prosodic units, the length of a prosodic unit and so on. For this reason, Speech DB must involve tags about these informations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.85-88
• /
• 2004

해체 활동 시작 단계에서부터 최종처리까지 발생되는 일련의 모든 자료를 체계적이고 과학적으로 관리할 수 있는 해체 DB structure를 구축하기 위하여 해체 정보 전략 계획을 수립하였고, 해체 DB 정보 영역을 분류하여 세부항목을 도출하였으며, 시스템 개발 도구 및 운영환경을 설정하였다. 자료흐름도(DFD)와 개체 관계도(ERD)를 이용하여 해체 자료 구조를 최적화하였고, Prototype 과정을 거쳐 해체 자료가 체계적으로 저장 관리 될 수 있도록 프로그램을 개발 하였다. 현재(2001년6월부터 2003년12월)까지 연구로 해체활동을 통해 발생한 해체 현장 자료를 이용하여 해체 DB 시스템을 시험한 결과 무작위로 데이터를 추출하여 집계한 결과와 잘 일치하고 있음을 확인하였다.

• Smart Media Journal
• /
• v.1 no.3
• /
• pp.8-14
• /
• 2012

In this paper, we develope the smart phone App. contents of 3D sign language to widen the opportunity of the korean sign language education for the hearing-impaired and normal people. Especially, we propose the sign language conversion algorithm that automatically transform the structure of Korean phrases to the structure of the sign language. Also, we implement the 3D sign language animation DB using motion capture system and data glove for acquiring the natural motions. Finally, UNITY 3D engine is used for the realtime 3D rendering of sign language motion. We are distributing the proposed App. with 3D sign language DB of 1,300 words to the iPhone App. store and Android App. store.

• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.204-208
• /
• 2024

In this paper, we propose an ESD protection circuit that applies structural changes to LVTSCR, a general low-voltage ESD protection circuit, to improve the current driving capability (IEC-ESD) characteristics of the ESD protection circuit. Power consumption was minimized by separating the area where the electric field and ESD current path are formed in the LVTSCR structure, and the electrical characteristics were analyzed and current driving characteristics were improved. Structural problems resulting from deterioration of system level characteristics were analyzed through simulation, and the characteristics were verified by reflecting this. The electrical characteristics of the proposed ESD protection circuit were verified using a TCAD simulator and analyzed through HBM modeling and system level modeling. In addition, silicon production and HBM 10kV characteristics were verified through DB-Hitek 0.18um BCD process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.849-856
• /
• 2012

Chip on board type white light emitting diode on metal core printed circuit board with high thixotropy silicone is fabricated by vacuum printing encapsulation system. Encapsulant is chosen by taking into account experimental results from differential scanning calorimeter, shearing strength, and optical transmittance. We have observed that radiant flux and package efficacy are increased from 336 mW to 450 mW and from 11.9 lm/W to 36.2 lm/W as single dome diameter is varied from 2.2 mm to 2.8 mm, respectively. Double encapsulation structure with 2.8 mm of dome diameter shows further significant enhancement of radiant flux and package efficacy to 667 mW and 52.4 lm/W, which are 417 mW and 34.8 lm/W at single encapsulation structure, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.567-574
• /
• 2015

In this paper, a 50ns 256-kb EEPROM IP for MCU (micro controller unit) ICs is designed. The speed of data sensing is increased in the read mode by using a proposed DB sensing circuit of differential amplifier type which uses the reference voltage, and the switching speed is also increased by reducing the total DB parasitic capacitance as a distributed DB structure is separated into eight. Also, the access time is reduced reducing a precharging time of BL in the read mode removing a 5V NMOS transistor in the conventional RD switch, and the reliability of output data can be secured by obtaining the differential voltage (${\Delta}V$) between the DB and the reference voltages as 0.2*VDD. The access time of the designed 256-kb EEPROM IP is 45.8ns and the layout size is $1571.625{\mu}m{\times}798.540{\mu}m$ based on MagnaChip's $0.18{\mu}m$ EEPROM process.