• 패션비즈니스
• /
• 제12권3호
• /
• pp.31-53
• /
• 2008

This study is to suggest a brassiere pattern suitable to the Chinese woman by recognizing the differences among the brassiere patterns of Europe, America and Italy by comparison. Collected data was analyzed by using SPSS 12.0. 1. If seeing the length of the ordinary brassiere's wing in Korea, the mean is 31.02cm to be shorter than these 3 patterns. The length of a wing should be adjusted according to the degree of fabric's elasticity. 2. The ESMOD type shows a high angle of $60^{\circ}$ as the position of a shoulder strip is placed outward a lot compared with other patterns. 3. For the FIT and Marangoni types, the lengths of the inside and the external diameters show similarly to each other but the ESMOD type shows that its inside diameter is 7.5cm and external one is 9.6cm to have the difference of 2.1cm so that it is considered to put the bust together stronger than the others. 4. The cup circumference of the FIT pattern shows to be the biggest and that of the FIT pattern is the smallest. As the FIT pattern has the shape to wrap the side of the bust, it has large circumference but as it has a narrow angle of a dart, it seems to be fit to the woman with a small and flat bust. 5. For 1/2 of the nipple distance of the brassiere for the Korean adult women, it shows to be 6.12cm, much narrower than the patterns studied, and it is noticed that the ESMOD pattern is very similar to the brassier in the Korean market. 6. As the mean keeper height is 6.5cm, it is noticed that it is very similar to the brassier for the Korean adult women if comparing that the brassiere for the Korean adult has the keeper height of 6.5-8.6cm. The Marangoni pattern tends to have a little low and the ESMOD and FIT patterns have a ordinary measure.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.3815-3826
• /
• 2011

본 연구는 아직 잘 알려지지 않은 고려말 조선초의 상류층 여성복식을 고증하여 구체관절인형의상 세트를 시험제작하고 한국 문화상품의 아름다움을 알리기 위한 것이다. 고려말 조선초의 상류층 여성복식은 풍성한 실루엣, 원과 명 복식과의 융합, 옛 고려풍의 부활, 발달한 모시 직조기술, 불교문화 복식이라는 특성을 가진다. 13-14C의 문헌과 유물과 회화를 통한 연구자의 고증과 패턴제작 과정을 거쳐 총 8점의 아이템이 외주제작되었다. 각 아이템은 세트로 구성되었으나 소비자가 단품으로 선택할 수 있으며 다양한 조합이 가능하다. 인체와 특성이 다른 구체관절인형의 바디로 인해 부분적으로 다아트와 작은 고름이 첨가되고 강직한 직물이 사용되었다. 이후로는 기성품 생산을 위한 업체 시스템 개발 연구가 필요하다.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2616-2628
• /
• 2021

The results of effective irradiation swelling in a wide range of burnup levels are numerically obtained for an inert matrix fuel, which are verified with DART model. The fission gas swelling of fuel particles is calculated with a mechanistic model, which depends on the external hydrostatic pressure. Additionally, irradiation and thermal creep effects are included in the inert matrix. The effects of matrix creep strains, external hydrostatic pressure and temperature on the effective irradiation swelling are investigated. The research results indicate that (1) the above effects are coupled with each other; (2) the matrix creep effects at high temperatures should be involved; and (3) ranged from 0 to 300 MPa, a remarkable dependence of external hydrostatic pressure can be found. Furthermore, an explicit multi-variable mathematic model is established for the effective irradiation swelling, as a function of particle volume fraction, temperature, external hydrostatic pressure and fuel particle fission density, which can well reproduce the finite element results. The mathematic model for the current volume fraction of fuel particles can help establish other effective performance models.

• 한국의류산업학회지
• /
• 제20권6호
• /
• pp.690-703
• /
• 2018

The purpose of this study is to help user understand the basic principles and interfaces of each program, and to provide a base material for the development of more efficient apparel CAD systems to compensate for each program's shortcomings by comparing the function of three apparel CAD systems: Yuka CAD, Opti-tex, and Style CAD. For this purpose, the skirt waistband and sleeve armhole line creation process were selected based on these two criteria. 1) There is a big difference between principle and method between CAD systems. 2) When CAD system is used rather than paper drawing process, the process is shortened and convenience is high. In this study, pros and cons and supplement point of each CAD system are suggested by comparing the functions of the CAD system performing the selected drafting process by four criteria: icon, key, method, and characteristic point. As a result of the study, it was confirmed that the three CAD systems differ in the basic principle and interface environment. As a result of analyzing the skirt waistband method function, it was confirmed that the band line is formed directly on the outline of the skirt and the band dart recognition function is the most efficient function and as a result of the analyzing the sleeve armhole line method function, it was confirmed that the curve generation function using the shape of the actual curve measure and the length adjustment function through the automation of the dimension calculation is the most efficient function.

• 산경연구논집
• /
• 제11권12호
• /
• pp.39-45
• /
• 2020

Purpose: The stock price delay phenomenon refers to a phenomenon in which stock prices do not immediately reflect corporate information and the reflection is delayed. A prior study reported that the stock price delay phenomenon appears strongly when the quality of corporate information is low (Callen, Khan, & Lu, 2013). The purpose of the internal accounting control system is to improve the reliability of accounting information. Specifically, the more professionals such as certified public accountants are placed in the internal accounting control system, the more information is prevented from being distorted, so the occurrence of stock price delay will decrease. Research design, data and methodology: In this study, companies listed on the securities market from 2012 to 2016 were selected as a sample to analyze whether the stock price delay phenomenon is alleviated as accounting experts are assigned to the internal accounting control system. The internal control personnel data were collected in the "Internal Accounting Control System Operation Report" attached to the business report of each company of the Financial Supervisory Service's Electronic Disclosure System(DART). The measurement method of the stock price delay phenomenon was referred to the study of Hou and Moskowitz (2005). The final sample used in the study is 2,641 firm-years. Results: It was found that companies with certified accountants in the internal accounting control system alleviate the stock price delay phenomenon. This result can be interpreted as increasing the speed at which corporate information is reflected in the stock price by improving the reliability of information disclosed in the market by the placement of experts in the system. Conclusions: The results of this study suggest that accounting professionals assigned to the internal accounting control system are playing a positive role in providing high-quality information to the market. In this study, focusing on the fact that the speed at which corporate information is reflected in the stock price is very important for the stakeholders in the capital market, we find that having a certified public accountant in the internal accounting control system alleviates the stock price delay phenomenon.

• 한국의상디자인학회지
• /
• 제22권4호
• /
• pp.1-16
• /
• 2020

This study focused on front-blouse-type skirts from the 15th and 16th centuries and aimed to investigate their formative characteristics and wearing patterns. Previous studies, literature, records, paintings, and excavated clothing items were used as research materials. The researcher categorized front-blouse-type skirts into three types based on the construction method. The first has the front-center portion of the skirt folded up, the second has the center portion cut short, and the third has horizontal dart pleats on either side. An examination of 48 items from 18 excavation sites of front-blouse-type skirts showed that only the front-center portion folded up type appeared in the 15th century, and it was only in the 16th century that the other forms of skirts were worn. Finally, based on the analysis, the pattern of wearing front-blouse-type skirts and their changing factors was deduced. Front-blouse-type skirts were identified as ceremonial skirts that were popular in the 15th and 16th centuries among the types of long skirts available. The popularity and usage of this type of skirt began to spread gradually in the 15th century. In the 16th century, various types of front-blouse-type skirts were brought into vogue by the royal family and the external register. It can be inferred that the popularity of front-blouse-type skirts gradually declined in the 17th century as other types of long skirts, folding skirts, and Sran type skirts emerged.

• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.143-154
• /
• 2021

This study attempted to develop winter jackets and pants patterns reflecting the latest comfortable and active school uniform trends, using middle school boy avatars having various body shapes. Jacket and pants pattern-drawing methods and margins differed. Based on the results, research prototypes were prepared. Then, virtual wear prospective drawings, clothing pressure, and appearance were assessed according to body shape. Jackets were assessed using 25 factors, while pants were assessed using 19. Then, correlations between the jackets and pants were analyzed. According to the analysis, the reason why the dart & tuck position and margin were rated low was confirmed. In a virtual wear assessment on jacket patterns by body shape, a significant difference was found in all categories, except for fit and shape at the front bottom, sleeve length on the side, and the center back line. The virtual wear assessment on the pants patterns by body shape also revealed a significant difference in all categories, except for pants length. In jackets, a significant influence was observed around the shoulders and waist in Type 1 and around the belly in Type 2. On the contrary, for pants, a significant influence was found around the hip and waist in Type 1 and around back crotch in Type 2. Therefore, they should be considered when making of jackets and pants. The above results suggested that jacket and pants patterns should vary depending on body shape. It is anticipated that there should be further studies comparing brand-name school uniforms for middle school girls and school uniforms by body shape.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.826-835
• /
• 2021

The purpose of this study was to compare the similarity between actual and virtual pants using a virtual 3D CLO program. A subject corresponding to the average size of a women in her twenties was selected and an avatar with the same specifications was produced. Silhouettes of the pants were classified into trousers, slacks, and wide pants and images of actual and virtual pants were evaluated from the front, side, and back. The results were as follows: Overall, the resemblance of the trousers was evaluated higher than that of other pants. The average similarity of trousers was 4.20 at the front, 3.98 at the side, and 4.17 at the back, which was much like the actual clothing. In contrast, that of the slacks was 3.62, 3.73, and 3.79 and of the wide pants was 3.81, 3.53, and 3.97. The similarity between the actual and virtual clothing was relatively well reproduced when the shape of the pants was like the silhouette of the human body. However, if the pants were tight or loose, virtual fits failed to display the wrinkles caused by the tightness or the excessive slack. The virtual fit showed fewer wrinkles and did not depict the location and the shape of hemlines as accurately as the actual fit, although virtual fits adequately displayed the baseline and dart on the pants.

• 복식문화연구
• /
• 제29권6호
• /
• pp.849-864
• /
• 2021

This study analyzed product conditions in terms of "size system," "clothing construction depending on fit," "details," "colors," and "prices," with an emphasis on young contemporary brands for spring/summer 2021, in order to provide basic data for the development of small-sized women's jackets. Out of 96 domestic and foreign brands, the study analyzed 254 small-sized jacket products from 23 brands that produce size-XS jackets. First, when examining the sizes for women's jackets, we found that 8 out of the 23 brands offer a size-XXS option. After conducting tree analysis to analyze the factors affecting the production of size-XXS, the study found significant results in the areas of "distinction between domestic and foreign brands" and "product price." Second, after categorizing small-sized women's jackets into 3 categories-fit-slim, basic, and straight-the study analyzed clothing construction elements depending on fit. This seasons mainly feature straight-fit's hip-line length jacket, a 4-panel pattern, and a panel without a waist dart. Third, the study, through the analysis of the colors of small-sized women's jackets, found a higher frequency of colors in the order of black (23.0%), white (13.3%), and beige tones (10.1%), with additional colors such as sky blue, rose pink, and aquamarine in production, which exhibit the senses of the seasons. Price analysis revealed that small-sized jackets constituted a price range at the mid-to-low end, as in ₩50,000-100,000 (30.3%), ₩100,000-150,000 (19.3%), and ₩150,000-200,000 (11.8%).

• Safety and Health at Work
• /
• 제13권3호
• /
• pp.343-349
• /
• 2022

Background: In the United States, the dairy product manufacturing industry has consistently had higher rates of work-related nonfatal injuries and illnesses compared to the national average for industries in all sectors. The selection and implementation of appropriate safety performance indicators are important aspect of reducing risk within safety management systems. This study examined the leading safety indicators implemented in the dairy product-manufacturing sector (NAICS 3115) and their perceived effectiveness in reducing work-related injuries. Methods: Perceptions were collected from individuals with safety responsibilities in the dairy product manufacturing facilities. OSHA Incident Rate (OIR) and Days away, restricted and transferred (DART) rates from 2013 to 2018 were analyzed. Results: The perceived most effective leading were safety observations, stop work authority, near miss reporting, safety audits, preventative maintenance, safety inspections, safety training attendance, and job hazard analysis/safety analysis, respectively. The 6-year trend analysis showed that those implementing all eight top indicators had a slightly lower rates than those that did not implement all eight. Production focused mentality, poor training, and lack of management commitment were perceived as the leading causes of injuries in this industry. Conclusion: Collecting leading indicators with the unique interest to meet the regulatory requirements and to document the management system without the actual goal of using them as input to improve the system most probably will not lead to an effective reduction of negative safety outcomes. For leading indicators to be effective, they should be properly selected, executed, periodically evaluated and actions are taken when necessary.