• Title/Summary/Keyword: D2Q9

Search Result 300, Processing Time 0.026 seconds

Numerical Analysis of Bragg Reflector Type Film Bulk Acoustic Wave Resonator (수치적 계산을 이용한 Bragg Reflector형 탄성파 공진기의 특성 분석)

  • 김주형;이시형;안진호;주병권;이전국
    • Journal of the Korean Ceramic Society
    • /
    • v.38 no.11
    • /
    • pp.980-986
    • /
    • 2001
  • Bragg reflector type FBAR was fabricated on the Si(100) substrate. We measured a frequency response of the resonator at 5.2 GHz and analyzed it by numerical calculation considering actual acoustic losses of each layer in the structure. We fabricated nine layer Bragg reflector of W-SiO$_2$pairs using r.f. sputtering method and fabricated AlN piezoelectric and Al electrodes using pulsed dc sputtering. The return loss(S$_{11}$) of the fabricated Bragg reflector type FBAR was 12 dB at 5.38 GHz and the series resonance frequency(f$_{s}$) was 5.376 GHz and the parallel resonance frequency(f$_{p}$) was 5.3865 GHz. Effective electro-mechanical coupling constant (K$_{eff{^2}}$) and Quality factors(Q$_{s}$), the Figures of Merit of the resonator, were about 0.48% and 411, respectively. We extracted acoustic parameters of AlN piezoelectric and reflection coefficient of the Bragg reflector by numerical calculation. We could know that material acoustic impedance and wave velocity of AlN piezoelectric decreased for intrinsic value and the electromechanical coupling constant(K$_2$) value was very low owing to the poor quality of the AlN piezoelectric. Reflection coefficient of Bragg reflector was 0.99966 and reflection band was very wide from 2.5 to 9.5 GHz.

  • PDF

Production of Biological Activator by Microorganisms - II. Extraction of Cellular Materials from Rhodotorula rubra - (미생물을 이용한 생리 활성 물질의 생산 - 제 2 보 : Rhodotorula rubra로 부터 균체 성분의 추출 -)

  • Oh, Doo-Hwan;Pyun, Yu-Ryang;Ryu, Seung-Kon;Yu, Ju-Hyun
    • Korean Journal of Food Science and Technology
    • /
    • v.12 no.2
    • /
    • pp.133-139
    • /
    • 1980
  • The extraction mechanism and extraction conditions of cellular lipid of freeze-dried cells of Rhodotorula rubra YUFE 1526, which was reported as coenzyme Q producing microorganism, were studied. 1. Methyl alcohol was the most appropriate solvent for extraction of cellular lipids and the resulting total lipid was 19.17 weight %. 2. When 1 % (w/v) of freeze-dried cell was extracted by methyl alcohol, the extraction yield was 90.49 % at $50^{\circ}C$ for 2 hr. 3. The diffusivity varied with extraction temperature and the empirical equation was derived as follows : $2.2e^{0-02907T}{\times}10^{-9}\;mm^2/min.$ 4. The diffusivity of cellular lipid of Rhodotorula rubra YUFE 1526 was $9.4{\times}10^{-9}\;mm^{2}/min.$ 5. The extraction model was well fitted on the extraction of cellular lipid.

  • PDF

Design of Main Carrier Rejection Circuit for Adaptive Linear Power Amplifier without usign Pilot Tones (Pilot tone들을 사용치 않는 자동적응 선형전력 증폭기용 주 신호 제거회로 설계)

  • Jeong, Yong-Chae
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.9
    • /
    • pp.6-12
    • /
    • 1999
  • It is difficult to realize adaptive main carrier rejection circuit in feedforward-type LPA(Linear Power Amplifier) because the gain and nonlinear characteristics of power amplifier are changed according to operating frequency, voltage, temperature. Usually, pilot tones are used for adaptive LPA operation. but in this paper, the relative phase, which in obtained through I&Q demodulator using input signals as LO signals and main-path & sub-path signals as RF signals, and the magnitude of main-path & sub-path signals are compared, so main carrier rejection is obtained. The proposed method rejects main carriers by 28.34 ~ 34.66dB (@Po=36.2 ~ 28.2 dBm/tone) with two tones at 877MHz, 882MHz and also rejects main carriers by 31.3dB despite changing condition of operating voltage.

  • PDF

Piezoelectric and Dielectric Characteristics of Low Loss Low Temperature Sintering PMN-PNN-PZT Ceramics with the amount of PNN Substitution (PNN 치환량에 따른 저손실 저온소결 PMN-PNN-PZT 세라믹스의 압전 및 유전특성)

  • Yoo, Ju-Hyun;Kim, Kook-Jin;Jeong, Yeong-Ho;Lee, Su-Ho
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.20 no.9
    • /
    • pp.766-770
    • /
    • 2007
  • In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator, $0.07Pb(Mn_{1/3}Nb_{2/3})O_3-xPb(Ni_{1/3}Nb_{2/3})O_3-(0.93-x)Pb(Zr,Ti)O_3$ ceramics system were fabricated using $Li_2CO_3-Bi_2O_3-CuO$ sintering aids and the specimens were sintered at $930^{\circ}C$. Thereafter, their piezoelectric and dielectric characteristics were investigated according to the amount of PNN substitution. At 9 mol% PNN substitution, density, electromechanical coupling factor ($k_p$), dielectric constant, mechanical quality factor ($Q_m$) and piezoelectric constant ($d_{33}$) showed the optimum value of $7.86g/cm^3$, 0.60, 1640, 1323 and 387 pC/N, respectively. It is considered that these values are suitable for piezoelectric divece application such ad multilayer piezoelectric actuator and ultrasonic vibrator with pure Ag internal electrode.

A Study on Chemical Resistance of Cement Mortar Blended with Thermally Activated Diatomite containing Heavy Metals form EAF Dust (EAF Dust사의 중금속을 함침한 활성 규조토가 혼합된 시멘트 모르터의 내화학성에 관한 연구)

  • 류한길;임남웅;박종옥
    • Magazine of the Korea Concrete Institute
    • /
    • v.9 no.1
    • /
    • pp.143-151
    • /
    • 1997
  • Chemical resistance of the cement mortar containing the Thermally Activated Diaomite(TAD) and H.M.(Heavy Metals) has been studied. The H.M.. extracted from EAF(Electrica1 Arc Furnace) Dust. were saturated with diatomite. The diatomite was then thermally activated at $750{\circ}C$ for 30minutes and powdeled. The powder was mixed with a portland cement on a weight basis from 0%. 2.5%. 5.0%. 10%. 20%. The optimum mixture. after those mixtures were subjected to compressive strength(7 and 28days) and leaching bchaviour of H.M.. was tested for its experiment on Wet/Dry cycles and chemical resistance(e.q. imrncrsion in 5%(Conc.) of H2S04, CaC12 and hlgSO4. It was shown that the cement, mortar containing 10% of' P.D. gave a rise to the remarkable increase in compressive strength. The compressive strength was generally decrease beyond the addition of 10% of P.D. The maximum $496kgf/cm^2$ of 28days compressive strength was acheiveti when 10% of P.D. was added to the cement mortar.

The Distribution and Life-form of Ferns in Gwangneung Forest (광릉숲 양치식물의 분포와 생활형)

  • Lee, Kang-Hyup;Yeo, Kyung-Taek;Jung, Seung-Sun
    • Korean Journal of Plant Resources
    • /
    • v.19 no.5
    • /
    • pp.592-597
    • /
    • 2006
  • To understand the status of ferns' distribution of Gwangneung forest, flora survey was done during the period of April 2003 to November 2005. The results obtained from this study were as follows: Ferns identified and surveyed were 46 taxa including 9 families 17 genera 43 species 3 varieties were recorded in Gwangneung Forest. Hemicryrtophyte (H) was the most common dormancy from recorded in surveyed area. Epiphyte (E) and Hydatophyte (HH) were calculated as 4.3%, 2.2%, respectively and they were the lower value compared to those of other dormancy form. Consequently, $H-R_{3}-D_{1}-t$ was recorded as the most common life-form of ferns in Gwangneung Forest. Pteridophyta-Quotient (Ptph.-Q.) was calculated as 1.28 and it was the higher value compared to those of other neighboring mountains.

Lip Contour Detection by Multi-Threshold (다중 문턱치를 이용한 입술 윤곽 검출 방법)

  • Kim, Jeong Yeop
    • KIPS Transactions on Software and Data Engineering
    • /
    • v.9 no.12
    • /
    • pp.431-438
    • /
    • 2020
  • In this paper, the method to extract lip contour by multiple threshold is proposed. Spyridonos et. el. proposed a method to extract lip contour. First step is get Q image from transform of RGB into YIQ. Second step is to find lip corner points by change point detection and split Q image into upper and lower part by corner points. The candidate lip contour can be obtained by apply threshold to Q image. From the candidate contour, feature variance is calculated and the contour with maximum variance is adopted as final contour. The feature variance 'D' is based on the absolute difference near the contour points. The conventional method has 3 problems. The first one is related to lip corner point. Calculation of variance depends on much skin pixels and therefore the accuracy decreases and have effect on the split for Q image. Second, there is no analysis for color systems except YIQ. YIQ is a good however, other color systems such as HVS, CIELUV, YCrCb would be considered. Final problem is related to selection of optimal contour. In selection process, they used maximum of average feature variance for the pixels near the contour points. The maximum of variance causes reduction of extracted contour compared to ground contours. To solve the first problem, the proposed method excludes some of skin pixels and got 30% performance increase. For the second problem, HSV, CIELUV, YCrCb coordinate systems are tested and found there is no relation between the conventional method and dependency to color systems. For the final problem, maximum of total sum for the feature variance is adopted rather than the maximum of average feature variance and got 46% performance increase. By combine all the solutions, the proposed method gives 2 times in accuracy and stability than conventional method.

Charge-discharge Behaviour of Lithium Ion Secondary Battery Using LiCo$O_2$ Synthesized by a Solution Phase Reaction (액상 반응에 의해 합성한 리튬코발트산화물을 이용한 Lithium ion 2차전지의 충방전 특성)

  • 김상필;조정수;박정후;윤문수;심윤보
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.11 no.11
    • /
    • pp.1049-1054
    • /
    • 1998
  • The LiCo$O_2$ powder was synthesized by a solution phase reaction. This shows a high (003) peak intensity and low (104) or (101) peak intensities in X-ray diffraction spectra. The LiCo$O_2$/Li cell shows an initial discharge capacity of 102.9mAh/g and an average discharge potential or 3.877V at a current density of 50mA/g between 3.0~4.2V. The peaks of dQ/dV plot are associated with Li ion intercalation/deintercalation reaction. To evaluate the cycleability of an actual battery system, cylindrical lithium ion cell was manufactured using graphitized MPCF anode and LiCoO$_2$ cathode. After 100th cycle, this cel maintains 80% capacity of 10th cycle value. The LiCoO$_2$/MPCF cell has a high discharge voltage of 3.6~3.7V and a good cycle life performance on cycling between 4.2~2.7V.

  • PDF

Three novel germline mutations in MLH1 and MSH2 in families with Lynch syndrome living on Jeju island, Korea

  • Kim, Young-Mee;Choe, Chang-Gyu;KimCho, So-Mi;Jung, In-Ho;Chang, Won-Young;Cho, Moon-Jae
    • BMB Reports
    • /
    • v.43 no.10
    • /
    • pp.693-697
    • /
    • 2010
  • Hereditary non-polyposis colorectal cancer (HNPCC) is an autosomal dominant syndrome characterized by predisposition to early-onset cancers. HNPCC is caused by heterozygous loss-of-function mutations within the mismatch repair genes MLH1, MSH2, MSH6, PMS1, and PMS2. We genotyped the MLH1 and MSH2 genes in patients suffering from Lynch syndrome and in 11 unrelated patients who were diagnosed with colorectal cancer and had subsequently undergone surgery. Five Lynch syndrome patients carried germline mutations in MLH1 or MSH2. Two of these were identified as known mutations in MLH1: deletion of exon 10 and a point mutation (V384D). The remaining three patients exhibited novel mutations: a duplication (937_942dupGAAGTT) in MLH1; deletion of exons 8, 9, and 10; and a point mutation in MLH1 (F396I) combined with multiple missense mutations in MSH2 (D295G, K808E, Q855P, and I884T). The findings underline the importance of efficient pre-screening of conspicuous cases.

Reproductive Responses of Awassi Ewes Treated with either Naturally Occurring Progesterone or Synthetic Progestagen

  • Husein, Mustafa Q.;Kridli, Rami T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.15 no.9
    • /
    • pp.1257-1262
    • /
    • 2002
  • The objective was to identify the appropriate form of progesterone, which exhibits compact reproductive responses in Awassi ewes during mid to late seasonal anestrous period. Forty-eight Awassi ewes were randomly allocated into four groups to be treated with 60 mg medroxyprogesterone acetate (MAP), 30 mg fluorogestone acetate (FGA), 40 mg FGA, or 600 mg progesterone sponges. After a 12 day period, sponges were removed and ewes were administered i.m. with 600 IU PMSG (d 0, 0 h). Five harnessed Awassi rams were turned-in with the ewes to detect heat. Ewes were checked for breeding marks at 6 h intervals for 5 days. Blood samples were collected from all ewes for analysis of progesterone concentrations. Pretreatment (d -13 and -12) progesterone concentrations were ${\leq}0.2ng/mL$ among all ewes and were indicative of seasonal anestrous period. On d 0, progesterone concentrations were elevated to $1.4{\pm}0.1ng/mL$ in ewes received progesterone sponges only and were higher (p<0.0001) than those (${\leq}0.2ng/mL$) administered MAP or FGA sponges. Progesterone concentrations returned to their basal values of <0.2 ng/mL within 24 h of sponge removal and were similar (p>0.1) among all ewes. Incidence of estrus was similar (p>0.1) among the four groups and occurred in 75% (9/12), 82% (9/11), 67% (8/12) and 58% (7/12) of the ewes receiving MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively. Estrous responses occurred 14.7, 20 and 13.6 h earlier in progesterone-sponge-treated ewes than those of MAP- (p<0.04), 30 mg FGA- (p<0.01) and 40 mg FGA-treated (p=0.06) ewes, respectively. Induced estrus conception rates were 50% (6/12), 55% (6/11), 50% (6/12) and 42% (5/12), out of which 4/6, 4/6, 3/6 and 3/5 lambed 151 days following d 0, and were similar (p>0.1) among ewes of the four treatment groups. Ewes that returned to estrus 16 to 20 days following d 0 were 5/12, 5/11, 6/12 and 4/12 ewes treated with MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively, and all lambed 169 days later. Overall lambing rates were 75% (9/12), 82% (9/11), 75% (9/12) and 58% (7/12) ewes treated with MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively. Results demonstrate that applications of MAP, 30 mg FGA, 40 mg FGA and progesterone sponges Awassi ewes were equally effective in induction of estrus and tended to favor both types of FGA and MAP in overall lambing rates over progesterone sponges during the seasonal anestrous period.