• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.959-966
• /
• 2006

This paper proposes a new concept about dual band predistortion linear power amplifier(PD LPA) using diplexer for digital cellular ($f_o$=880 MHz) and IMT-2000($f_o$=2,140 MHz) base stations. The diplexer is composed of low pass filter having defected ground structure(BGS) microstrip line and high pass filter having high-Q lumped capacitors and distributed elements. The proposed predistorter adopts a reflection type intermodulation signal generator with 3 dB hybrid coupler for good reflection characteristic. for a forward link one carrier CDMA IS-95A 1FA and WCDMA 1FA signal, the proposed dual band PD LPA shows the adjacent channel leakage ratio(ACLR) improvement about 10 dB and 9.36 dB for digital cellular and IMT-2000 band, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.600-608
• /
• 2014

This paper presents estimation of d-axis and q-axis inductance of an interior permanent magnet synchronous motor (IPMSM) by using an extended Kalman filter (EKF). The EKF is widely used for control applications including the motor sensorless control and parameter estimation. The motor parameters can be changed by temperature and air-gap flux. In particular, the variation of the inductance affects torque characteristics like the maximum torque per ampere (MTPA) control. Therefore, by estimating the parameters, it is possible to improve the torque characteristics of the motor. The performance of the proposed estimator is verified by simulations and experimental results based on an 11kW PMSM drive system.

• Journal of Nutrition and Health
• /
• v.42 no.7
• /
• pp.622-630
• /
• 2009

The purpose of this study was to establish an association between glycemic index (GI), glycemic load (GL), dietary carbohydrates and diabetes with the context of the current population dietary practice in Korea. The subjects of 3,389 adults (male 1,430, female 1,959) were divided into normal (serum fasting glucose < 100 mg/dL), impaired glucose tolerance (100 ${\leq}$ serum fasting glucose < 126 mg/dL), diabetes (serum fasting glucose > 126 mg/dL) by serum fasting glucose. Anthropometric and hematologic factors, and nutrient intakes, dietary glycemic index (DGI), dietary glycemic load (DGL) were assessed. Multiple logistic regression model was used to determine the odds ratios (ORs) and 95% confidence intervals for relationship of DGI, DGL, carbohydrates intakes, and diabetes. DGI and DGL were not significantly correlated with impaired glucose tolerance and diabetes. However, the risk of impaired glucose tolerance and diabetes showed a tendency to increase as increase of DGI after multivariate adjustment (age, education, income, region area, diabetes family history, smoking, drinking, exercise, energy intake) in male. The risk of impaired glucose tolerance and diabetes showed a tendency to increase in the DGI 71.1-74.8 after multivariate adjustment in female. DGL was inversely related to impaired glucose tolerance and diabetes in male. In female, however, DGL was positively related to impaired glucose tolerance and diabetes. In particular, the risk of diabetes increased positively in level of DGL 260.5, and remained after multivariate adjustment (Q5 vs Q1：2.38, 0.87-6.48). When percent energy intakes from carbohydrates were more than 70%, the risk of impaired glucose tolerance and diabetes increased in both male and female. In particular, when percent energy intakes from carbohydrates were more than 69.9%, the risk of diabetes increased positively in male (Q4 vs Q1：2.34, 1.16-4.17). In conclusion, above 70% energy intakes from carbohydrates appeared to be a risk factor of diabetes. It seemed that the meal with high GI and GL value must be avoided it. And also, the macronutrients of the meal must be properly balanced. In particular, it may be said that it is a preventive way for treatment of the diabetes to avoid eating carbohydrates of much quantity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.68-69
• /
• 2005

Low temperature ($\leq900^{\circ}C$) sintering piezoelectric ceramics $0.01Pb(Mg_{1/2}W_{1/2})O_3$-0.41Pb$(Ni_{1/3}Nb_{2/3})O_3-0.35PbTiO_3-0.23PbZrO_3+0.1wt%Y_2O_3+xwt%ZnO$ $(0{\leq}x{\leq}2.5)$ have been developed and investigated. The electromechanical coupling coefficient ($k_p$), piezoelectric constant ($d_{33}$), and mechanical quality factor ($Q_m$) have been measured to characterize the piezoelectric materials system. When 2.0 wt% ZnO is added, the properties of the system, $d_{33}$ = 559 pC/N, $k_p$ = 55.0 % and $Q_m$ = 73.4 are obtained which are very suitable for piezoelectric actuators. A bending mode multilayer actuator has been also developed using the materials which size is $27(L)\times9(W)\times1.07(t)mm^3$. The actuators are fabricated by multilayer ceramic (MLC) process and consist of24 layers and each layer thickness is $35{\mu}m$. At this time, the displacement of actuator was $100{\mu}m$ at 28V.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.2
• /
• pp.104-115
• /
• 1989

In an effort to clarify the wetted patterns of sandy loam soil under trickle irrigation conditions, the distance of wetted zone, infiltration capacity and soil wetted patterns, etc. were measured by gypsum block as soil moisture sensor located every 5 cm vertically and horizontaly in the soil bin under the such conditions as a). irrigation rates set to 2, 4, 6, 8 liters per hour b). total amount of water applied fixed to 14.62 liters per soil bin c) the hearing force of soil measured by plate penetrometer ranging from 1.04 to 1.22kg/cm$_2$ The results can be summarized as follows ; 1. The wetted distance in horizontal direction(H), the wetted distance in vertical direction(D), the horizontal infiltration capacity (iH) and the vertical infiltration capacity(in)could by explained as a function of time t. 2. The horizontal wetted distance (H) is explained by an exponetial function H= a$.$ t where b was found ranging from 021 to 026 under surface trickle irrigation, which was considered a lotlower than the classical value of 0.5 and these measurements were indifferent to the increasing irrigation rates. 3. As for the surface trickle irrigation where horizontal infiltration capacity(iH) is explained as iH = A $.$ t h, the coefficient A increases with respect to irrigation rates within the limits of 0.89~1.34. 4. In terms of surface trickle irrigation of the ratio of Dm Which is maximum vertical wetted distance to Hm, which is maximum horizontal wetted distance, found to be within range of 1.0 to 1.21. It was also noted that the value of Dm decreses when irrigation rates increases while the value of Hm changes the opposite direction. 5. The optimum location of sensors from emitter for surface trickle irrigation should he inside of hemisphere whose lateral radius is 28~30cm long and vertical radius is 10~12cm long. The distance between emitters should be within 60cm long. 6. In the study of vertical wetted distance( D) where D= a $.$ tb, the exponential coefficient b ranged from 0.61 to 0.75 in surface trickle irrigation, and from 0A9 to 0.68 for subsurface trickle irrigation. These measurements showed an increasing tendency to with respect to irrigation rates. 7. In case of vertical infiltration capacity( in), where iD= A $.$ t 1-h, the coefficient A for surface trickle irrigation found to be within range of 0.16 to 0.19 and did not show any relationships with varying degree of irrigation rates. However, the coefficient was varying from 0.09 to 0.22 and showed a tendency to increase vis-a-vis irrigation rates for subsurface trickle irrigation, in contrast. 8. In the observation of subsurface trickle irrigation, it was found that Dm/Hm ratio was within 1.52 to 1.91 and showed a decreasing tendency with respect to increasing rates of irrigation. 9. The location of sensors for subsurface trickle irrigation follows same pattern as above, with vertical distance from emitter being 10~17cm long and horizontal 22~25cm long. The location of emitter should be 50 cm. 10.The relationship between VS which is the volume of wetted soil and Q which is the total amount of water when soil is reached field capacity could be explained as VS= 2.914Q0.91and the irrigation rates showed no impacts on the above relationship.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.48-62
• /
• 2016

This study was conducted to classify forest vegetation structure and stand feature of Mt. Deogyusan National Park from Hyangjeukbong to Jungbong, 48 plots were surveyed. The type classification of the vegetation structure was performed with Z-M phytosociological method. As a result, Quercus mongolica community group was classified into the Picea jezoensis community, Carpinus cordata community and Tilia amurensis community in community unit. P. jezoensis community was subdivided into Deutzia glabrata group and Viburnum opulus var. calvescens group in group unit. D. glabrata group was subdivided into Acer mandshuricum subgroup and Ribes mandshuricum subgroup and V. opulus var. calvescens group was subdivided into Hemerocallis dumortieri subgroup and Prunus padus subgroup in subgroup unit. In the result of estimating the importance value, it constituted Q. mongolica (23.9%), Abies koreana (14.7%), Taxus cuspidata (10.2%), P. jezoensis (8.2%) and Betula ermanii (7.4%) in tree layer. It constituted Acer komarovii (18.6%), Acer pseudosieboldianum (18.4%) and Q. mongolica (8.9%) in subtree layer. It constituted Rhododendron schlippenbachii (20.7%), A. pseudosieboldianum (17.4%) and Symplocos chinensis (8.5%) in shrub layer. Indicator species analysis of vegetation unit 1 was consisted of Hydrangea serrata, Fraxinus mandshurica and D. glabrata that species prefer moist valley in subalpine or rocks. In the results of analyzing the species diversity, vegetation unit 1, 4 and 5 represented that there were different and complex local distributions. As in the similarity between the vegetation units, the vegetation units 1, 2, 3 and 4 represented high with 0.5 or above. It represented that there wasn't no differences on composition species in vegetation units.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.107-113
• /
• 1989

The purpose of this study is to compare the results of shear-deformation of saturated sand under the 3 dimensional stress with the results of simple torque-shear test already reported, Japaness standard sand, Toyoura sand, was chosen as test sample and the equipments of the department of soil mechancis laboratory of Nihon University were used. The conclusions obtained are as follows. 1). The friction angle of sand (${\phi}$) is proportional to the density regardless of the condition of stress-strain. This is because of the reason that the lower the cell pressure becomes, the larger the volume changes in case of the same density. 2). The value of ${\varphi}$ are variable according to the condition of stress-strain in the same density, and ${\phi}_dTS$ is larger than ${\phi}_dPS$ and ${\phi}_dTC$ when cell pressure is low. 3). ${\phi}_dPS$ is larger then ${\phi}_dTS$, under the same denstiy and same cell pressure. Thus the shear strength of sand is decided according to the condition of stress-strain 4). the relationship between the stress ratio (q/p) and strain increment ration in the plane strain test is linear regardless of the density and the cell pressure of the test sample.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.368-371
• /
• 2005

In this paper, a small band pass filter is designed using new probe type for wireless communication system. In order to provide a band pass filter which can be reduced in dimension, can be reduced in height, and can be surface-mounted. The filter was fabricated using $TE_{01{\delta}}$ mode dielectric resonator. The input/output probes are attached to coner portion of the rectangular metal cavity. Results of the manufactured filter$(12{\times}12{\times}8mm)$ show that the center frequency is 9.953GHz, the insertion loss is -2.98 dB, the 3dB-bandwidth is 15 MHz, and the lode Q is 663.

• Korean Journal of Veterinary Research
• /
• v.40 no.4
• /
• pp.683-689
• /
• 2000

The present study was carried out to investigate the blood markers of Thoroughbred horses (TB) The blood red cell types and blood protein types (biochemical polymorphisms) were tested from 1,125 Thoroughbred horses by serological and electrophoretic procedures, and their phenotypes, gene frequencies, heterozygosity, polymorphic information content values and exclusion probability were estimated. The blood group and biochemical polymorphism phenotypes observed with high frequency were Aaf(91.7%), Ca(94.7%), K-(94.5%), Ua(75.9%), P-(50.6%), Qabc(82.6%), ALB-BB(67.7%), GC-FF(92.7%), AIB-KK(99.6%), ES-II(77.9%), TF-DF1(23.6%), PI-LL(23.2%), HB-B2B2(73.6%), PGD-FS(45.4%) and genotypes Dcgm/dk(16.9%), Dbcm/cgm(13.6%), Dbcm/dk(11.9%), Dcegmn/cegmn(10.0%), Dcgm/cgm(8.7%) in TB. Alleles observed with high frequency were Aaf(0.796), Ca(0.769), Ddk(0.266), Dcgm(0.261), Dbcm(0.211), K-(0.972), P-(0.710), Qabc(0.565), Q-(0.368), Ua(0.509), $HB^{B2}$(0.858), $PGD^F$(0.634), $ALB^B$(0.825), $GC^F$(0.927), $AIB^K$(0.998), $ES^I$(0.881), $TF^{F1}$(0.346), $TF^D$(0.319), $TF^{F2}$(0.184), $PI^L$(0.479), $PI^N$(0.214), $PI^U$(0.116) in TB. The heterozygosity, polymorphic information content (PIC) and exclusion probability (PE) were calculated. The mean heterozygosity and PIC value were 0.3899 and 0.3375, respectively. The highest heterozygosity and PIC were estimated 0.7834 and 0.7492 in blood group D locus, respectively. The cumulated PE obtained by blood groups and biochemical polymorphisms was 0.9813.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.990-997
• /
• 1998

In this work, the $SiO_2$ films on the silicon substrate with different orientations were first prepared by the low temperature process using the ECR plasma diffusion as a function of microwave power and oxidation time. Before and after thermal treatment, the surface morphology, Si/O ratio from physicochemical properties, and the electrical properties of the oxide films were also investigated. The oxidation rate increased with microwave power, while surface morphology showed the nonuniform due to etching. The film quality, therefore, was lowered with increasing the defect by etching and the content of positive oxide ions in the oxide films from bulk by higher self-DC bias. The content of positive oxide ions in the oxide films with different Si orientations showed Si(100) < Si(111) < poly Si. The defects in $Si/SiO_2$ interface of $SiO_2$ film could be decreased by annealing, while $Q_{it}$ and $Q_f$ were independent of thermal treatment and the dependent on concentration of reactive oxide ions and self-DC bias of substrate. At microwave power of 300, and 400 W, the high quality $SiO_2$ film that had lower surface roughness and defect in $Si/SiO_2$ interface was obtained. The value of interface trap density, then, was ${\sim}9{\times}10^{10}cm^{-2}eV^{-1}$.