• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.870-887
• /
• 2012

This paper qualitatively analyzes the stereo 3D content factors causing viewer's discomfort. For this, we perform a subjective test that each subject strokes a specific key whenever he or she feels discomfort during watching stereo 3D contents. Also we extract the quantitative values of the factors in the 3D contents to obtain the temporal changes of the factors. Those two sets of data are used to analyze the contents to find the content factors which cause viewer's discomfort. The factors to be considered are the amount and the frequency of the disparity change, story of the contents, situation or environments of a scene, movement and position of the image or camera, color and luminance information as well as disparities themselves. Most researches have dealt with each factor causing viewer's discomfort but this paper focuses on the composite factors rather than each of them. That is, this paper deals with the various strong and weak factors and their composites causing viewer's discomfort in addition to the big disparities which have been mostly so far.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.167-178
• /
• 2011

This study is an empirical study approach to investigating impact of 3D stereoscopic film's customer satisfaction. Using conventional methods, there were identified 3D stereo films's factors that character, story, dialogue, music, and 3D technical factors. And There were trying to analyze the impactive gaps of 3D stereoscopic film's customer satisfaction between high participation and low participation of customers about 3D film's. The results of this study can be summarized broadly as follows. First, the story and 3D technical factors was high-impact of customer's satisfaction at watching the 3D films. Second, 3D technical factors were highly correlated with customer satisfaction at the low participation group. And 3D technical factors and story were highly correlated with customer satisfaction at the high participation group. The conclusion is expected to provide useful suggestions about the selection of variables at the future 3D film study.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.2
• /
• pp.193-208
• /
• 2020

This study investigated similarities and differences between 2D flat sketch, 3D virtual clothing and real clothing images. Flat sketch, 3D virtual clothing, and real clothing images of T-shirts and dresses were made. Questionnaires were prepared for fit evaluation, sensory evaluation, and location evaluation. A survey of 440 questionnaires was collected from Chinese women in their 20s and 30s. As results of the sensibility evaluation, 3D virtual clothing expressed real clothing images slightly more similar than a 2D flat sketch. As results of the fit evaluation of the dresses, 2D flat sketch and 3D virtual clothing were rated as slightly longer/wider, and real clothing images were rated as slightly shorter/narrower. The results suggested that presenting 3D images with avatars as 3D virtual clothing images will provide more accurate fit evaluation results. This study presented possibilities and methods for apparel companies to utilize 3D system as an effective apparel production tool.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.2
• /
• pp.5-7
• /
• 2016

We present an experimental investigation of the superconducting transition temperatures, $T_c$, of superconductor/ferromagnet bilayers with varying the thickness of ferromagnetic layer. FeN was used for the ferromagnetic (F) layer, and NbN and Nb were used for the superconducting (S) layer. The results were obtained using three different-thickness series of the S layer of the S/F bilayers: NbN/FeN with NbN thickness, $d_{NbN}{\approx}9.3nm$ and $d_{NbN}{\approx}10nm$, and Nb/FeN with Nb thickness $d_{Nb}{\approx}15nm$. $T_c$ drops sharply with increasing thickness of the ferromagnetic layer, $d_{FeN}$, before maximal suppression of superconductivity at $d_{FeN}{\approx}6.3nm$ for $d_{NbN}{\approx}10nm$ and at $d_{FeN}{\approx}2.5nm$ for $d_{Nb}{\approx}15nm$, respectively. After shallow minimum of $T_c$, a weak $T_c$ oscillation was observed in NbN/FeN bilayers, but it was hardly observable in Nb/FeN bilayers.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.121-130
• /
• 2011

If you ask many Stereographers how to make a good S3D and you will get all different answers. There are several 3D knowledges and opinions that were not always in agreement. we have to choose which advice to follow and find our own way. But there will be no durable screening of S3D films without a minimal viewing comfort of all the audience whatever the differences of their vision. First of all, We always consider several factors to get an appropriate S3D shot before moving on to production. This is intended to provide a practical example on S3D film production. I hope that this article will encourage further research on this topic.

• Honam Mathematical Journal
• /
• v.31 no.4
• /
• pp.479-487
• /
• 2009

Let $S(z_1,z_2),\;S_1(z_1,z_2)$ and $S_2(z_1,z_2)$ be power series with operator coefficients such that $S_(z_1,\;z_2)=S_1(z_1,z_2)S_2(z_1,z_2)$. Assume that the multiplications by $S_1(z_1,z_2)$ and $S_2(z_1,z_2)$ are contractive transformations in H($\mathbb{D}^2,\;\mathcal{C}$). Then the factorizations of spaces $\mathcal{D}(\mathbb{D},\;\tilde{S})$ and $\mathcal{D}(\mathbb{D}^2,\mathcal{S})$ are well-behaved.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.28-34
• /
• 2006

Laboratory column tests using $Cl^-$ tracer were conducted to study the correlation of soil particle distribution and hydrodynamic dispersion mechanism with three kinds of ununiformed soil samples, in which the ratio of gravel and sand versus silt and clay is 24.5 for S-1 soil, 4.48 for S-2 soil, and 0.4 for S-3 soil. Chloride breakthrough curves with time were fitted with gaussian functions. The relative concentrations of chloride were converged to 1.0 after 0.7 hours for S-1, 6.3 hours for S-2, and 389 hours for S-3. Average linear velocity, longitudinal dispersion coefficient, and longitudinal dispersivity were calculated by chloride breakthrough curves. Longitudinal dispersion coefficients were $1.20{\times}10^{-4}\;m^2/sec$ for S-1, $8.87{\times}10^{-7}\;m^2/sec$ for S-2, and $1.94{\times}10^{-9}\;m^2/sec$ for S-3. Peclet numbers calculated by the molecular diffusion coefficient of chloride and the mean grain diameters of soils were $2.59{\times}10^2$ for S-1, $6.27{\times}10^0$ for S-2, and $1.35{\times}10^{-4}$ for S-3. Mechanical dispersion was dominant for the hydrodynamic dispersion mechanism of S-1. Both mechanical dispersion and molecular diffusion were dominant for the hydrodynamic dispersion mechanism of S-2, but mechanical dispersion was ascendant over molecular diffusion. Hydrodynamic dispersion in S-3 was occurred mainly by molecular diffusion. When plotting three soils on the graph of $D_L/D_m$ versus Peclet number produced by Bijeljic and Blunt (2006), the values of $D_L/D_m$ for S-1 and S-2 were more than 2.0 order compared to their graph. S-3 was not plotted on their graph because the Peclet number was as small as $1.35{\times}10^{-4}$.

• Journal of Embryo Transfer
• /
• v.22 no.2
• /
• pp.111-114
• /
• 2007

This study was carried out to investigate the reproductive performance of average (less than 10,000 liters milk in 305 days) and high yielding (more than 10,000 liters milk in 305 days) Holstein cattle at commercial dairy herds (n=22). Data on milk progesterone (10 to 60 days postpartum), days to post-partum estrous, days to post-partum conception, service per conception and calving interval were recorded for two consecutive years. Post-partum milk progesterone concentration and days to reach peak milk progesterone concentration were similar in high and average yielding cows. High yielding cows took more days to show signs of first postpartum estrous than average yielding cows. Post-partum conception was 20 days earlier in average yielding cows than high yielding cows. Artificial insemination per conception was similar between average and high yielding cows. Calving interval was 26.9 days longer in high yielding cows compared to average yielding cows. In conclusion, better reproductive and feeding management may help improve the reproductive performance of high yielding dairy cattle in commercial dairy farms.

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.63-69
• /
• 2010

This research does focus on supporting all of formal, or informal learning at real time. From industry or education field, learning training is according to worker's current situation or business context. And according to worker's current situation, or business flow, 3D immersion knowledge visualization is effective in the individual ability and the learning progress For this, workers listen to compound knowledge coaching advices at real time. Therefore we developed the realistic 3D based knowledge retrieval method to identify and retrieve multidimensional relation easily.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.641-644
• /
• 1998

In this paper, wideband MMIC LNA's were designed using low Q matching network. gains of 23.6~25.4dB $(24.5\pm0.9dB),$ noise figures of 0.9~2.8 dB were obtained from the designed wideband MMIC LNA in the frequency ranges of 1.2~2.8㎓. And, P1dB of 10.13 dBm, IP3 of 12.25 dB were obtained at the center frequency of 2 ㎓. A chip size of the designed wideband MMIC LNA is 1.4mm$\times$1.4mm.