• Knowledge Management Research
• /
• v.20 no.1
• /
• pp.27-43
• /
• 2019

This paper examines spillover effects of R&D investment in the ICT industry to other industries by analyzing panel data composed of 6 manufacturing industries for the period of 1983~2011. Major findings are as follows; (1) The increase of R&D investment in ICT industry has a significantly positive relationship with the increase in the value-added of the remaining 5 industries with 3~10 year lags, depending on the source of R&D funds and R&D stage. (2) More specifically, public R&D shows the spillover effects during 3~7-year lag periods, whereas private R&D started to exert spillover effects from 9-year lag. The result implies that the public R&D appropriately targets projects with more spillover effects. (3) Basic research, applied research, and development showed the spillover effects for the period of 9~10, 7~10, and 10-year lag, respectively. (4) The R&D investment in 5 other industries such as machinery, chemicals, and materials does not have positive spillover effects to the remaining industries. Few studies have been done to analyze the R&D spillover effects to other industries, with certain limitations. This study contributes to the existing literature by analyzing the spillover effects of the different R&D funds and R&D stages, and by considering various time-lag effects.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.4
• /
• pp.321-327
• /
• 2018

PURPOSE. The purpose of this study was to compare the cutting method and the lamination method to investigate whether the CAD data of the proposed inlay shape are machined correctly. MATERIALS AND METHODS. The Mesial-Occlusal shape of the inlay was modeled by changing the stereolithography (STL). Each group used SLS (metal powder) or SLA (photocurable resin) in the additive method, and wax or zirconia in the subtractive method (n=10 per group, total n=40). Three-dimensional (3D) analysis program (Geomagic Control X inspection software; 3D systems) was used for the alignment and analysis. The root mean square (RMS) in the 2D plane state was measured within $50{\mu}m$ radius of eight comparison measuring points (CMP). Differences were analyzed using one-way analysis of variance and post-hoc Tukey's test were used (${\alpha}=.05$). RESULTS. There was a significant difference in RMS only in SLA and SLS of 2D section (P<.05). In CMP mean, CMP 4 ($-5.3{\pm}46.7{\mu}m$) had a value closest to 0, while CMP 6 ($20.1{\pm}42.4{\mu}m$) and CMP 1 ($-89.2{\pm}61.4{\mu}m$) had the greatest positive value and the greatest negative value, respectively. CONCLUSION. Since the errors obtained from the study do not exceed the clinically acceptable values, the lamination method and the cutting method can be used clinically.

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.380-383
• /
• 1996

Adenosine deaminase inhibitor was extracted from culture broth of Streptomyces sp. strain V-8 with ethylacetate. The ethylacetate extract showed the characteristic UV absorption spectrum of actinomycins at 440-450 nm. The ethylacetate extract was compared with respect to inhibitory behavior against adenosine deaminase from calf intestinal mucosa with actinomycin D, -C complex and actinomycin V. The Ki values for actnomycin D, -C complex, and actinomycin V against adenosine deaminase were determined to be 9.9 $\times$ 10$^{-6}$ M, 9.6 $\times$ 10$^{-6}$ M and 9.3 $\times$ 10$^{-6}$ M, respectively. The Ki value for the ethylacetate extract of culture broth against adenosine deaminase was determined to be 5.7 $\times$ 10$^{-6}$ M. The kinetic parameters of actinomycin D, -C complex, -V and ethylacetate extract of culture broth for adenosine deaminase were as follows:I$_{50}$ = 1.5 $\times$ 10$^{-5}$ M (actinomycin D), 2.7 $\times$ 10$^{-5}$ M (actinomycin C complex), 3.5 $\times$ 10$^{-5}$ M (actinomycin V), 8.9 $\times$ 10$^{-6}$ M (ethylacetate extract of culture broth). The adenosine deaminase was inhibited noncompetitively by ethylacetate extract of culture broth as well as by actinomycin D, -C complex and actinomycin V.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.203-212
• /
• 2016

Dose differences between three-dimensional (3D) and four-dimensional (4D) doses could be varied according to the geometrical relationship between a planning target volume (PTV) and an organ at risk (OAR). The purpose of this study is to evaluate the correlation between the overlap volume histogram (OVH), which quantitatively shows the geometrical relationship between the PTV and OAR, and the dose differences. 4D computed tomography (4DCT) images were acquired for 10 liver cancer patients. Internal target volume-based treatment planning was performed. A 3D dose was calculated on a reference phase (end-exhalation). A 4D dose was accumulated using deformation vector fields between the reference and other phase images of 4DCT from deformable image registration, and dose differences between the 3D and 4D doses were calculated. An OVH between the PTV and selected OAR (duodenum) was calculated and quantified on the basis of specific overlap volumes that corresponded to 10%, 20%, 30%, 40%, and 50% of the OAR volume overlapped with the expanded PTV. Statistical analysis was performed to verify the correlation with the OVH and dose difference for the OAR. The minimum mean dose difference was 0.50 Gy from case 3, and the maximum mean dose difference was 4.96 Gy from case 2. The calculated range of the correlation coefficients between the OVH and dose difference was from -0.720 to -0.712, and the R-square range for regression analysis was from 0.506 to 0.518 (p-value <0.05). However, when the 10% overlap volume was applied in the six cases that had OVH value ${\leq}2$, the average percent mean dose differences were $34.80{\pm}12.42%$. Cases with quantified OVH values of 2 or more had mean dose differences of $29.16{\pm}11.36%$. In conclusion, no significant statistical correlation was found between the OVH and dose differences. However, it was confirmed that a higher difference between the 3D and 4D doses could occur in cases that have smaller OVH value.

• Biomedical Science Letters
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2004

Liver and serum $\beta$-D-mannosidase activities were determined in ethanol intoxicated rats with extrahepatic cholestasis induced by common bile duct ligation (CBD) to manifest the biochemical background of alcohol drinking hazard under the hepatobiliary disease. Liver $\beta$-D-mannosidase activity and its Vmax value in CBD ligated rats with chronic ethanol intoxication were found to be significantly decreased than that in CBD ligation alone. However, the difference of Km value on above hepatic enzyme was not found between the experimental groups. On the other hand, serum $\beta$-D-mannosidase activity in CBD ligated rats with chronic ethanol intoxication was increased more than that in CBD ligation alone. These results indicate that the biosynthesis of the hepatic $\beta$-D-mannosidase decreases and the serum $\beta$-D-mannosidase activity increases in cholestasis combined with chronic ehtanol intoxication, reflecting damage of aggravated hapatocytic membrane. Accordingly, the resulting data supported the fact that alcoholic drinks were enzymologically harmful to the hepatobiliary disease.

• Journal of Environmental Science International
• /
• v.11 no.1
• /
• pp.69-74
• /
• 2002

This study was performed to evaluate an applicability of the SMMCMAS system for reuse of the sewage from spa area and was operated to HLR(Hydraulic loading rate) of 211.3 to 126.8 $\ell$/㎥/d. The operating HRT(Hydraulic retention time) ranges were 2.5 to 1.5 hours. Conclusions are as follows; At the optimum HLR of 158.5 $\ell/\m^2$/d (HRT of 2.0 hours), the maximum BOD removal efficiency was 94% and the effluent BOD concentration was 1.1mg/$\ell$ in result. As the HLR was increased to 211.3 $\ell/\m^2$/d, BOD removal efficiency was decreased to 75% and BOD removal efficiency was also reduced to 74% at lower HLR of 126.8 $\ell/\m^2$/d. It shows that the maximum BOD removal efficiency occurs at an optimum HLR value and that the removal efficiency decreases when the HLR is either higher or lower than the optimum value. Sludge production rates were ranged 0.01 to 0.24gVSS/gBODrem/d and accomplished to 0.01gVSS/gBODrem/d at the optimum HLR of 158.5 $\ell/\m^2$/d.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.1
• /
• pp.69-74
• /
• 1996

Background: The diagnosis of pulmonary embolism (PE) based on clinical findings is often elusive and therefore requires confirmative diagnostic method. Pulmonary angiography, though the gold standard for the diagnosis of pulmonary embolism, is an invasive method and requires trained personnel and special equipment. Lung V/Q scan, on the other hand, is a noninvasive method but the diagnostic specificity and sensitivity arc not satisfactory in case that the results are either intermediate or low probability scan. Plasma D-dimer is generated when a thrombus is fibrinolysed by plasmin and is known to be increased in various thrombotic disorders. The aim of this study was to investigate the value of the determination of plasma D-dimer level in the diagnosis of pulmonary embolism. Methods: Pulmonary angiography was performed in 17 patients who were clinically suspected to have pulmonary embolism. 9 patients(PE, $56{\pm}13.4$ yrs, M:F=8:1) were diagnosed to have pulmonary embolism by pulmonary angiography. The control group were the 8 patients with negative pulmonary angiography and 13 orthopedic patients with no evidence of pulmonary embolism on scintigraphic and impedance plethysmographic studies(n=21) (non-PE, $54.5{\pm}11.1$ yrs, M:F=11:10). Plasma D-dimer was measured by latex agglutination method in study subjects and the results were analyzed according to the presence or absence of pulmonary embolism. Results: 1) The increased level of plasma D-dimer was more frequently observed in the patients with pulmonary embolism than in the controls(>0.5 mg/L, 8 in PE, 10 in non-PE; <0.5 mg/L, 1 in PE, 11 in non-PE, p=0.049). 2) The diagnostic value of plasma D-dimer level higher than 0.5 mg/L were as follows: sensitivity 88.9%(8/9), specificity 52.4%(11/21), positive predictive value 44.4%(8/18), and negative predictive value 91.7%(11/12). Conclusion: Plasma D-dimer determination showed high sensitivity and negative predictive value in the diagnosis of pulmonary embolism and is therefore thought to be useful in excluding the possibility of pulmonary embolism.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.12
• /
• pp.900-906
• /
• 2011

To investigate concentration and sources of PCDD/Fs and Co-PCBs in sediments, total 52 sediment samples were measured at 17 sites in Geum River. As a result of analysis, total concentrations of PCDD/Fs and Co-PCBs were ranged from not detected (N.D.)~193.47 pg/g-d.w. (mean value: 84.52 pg/g-d.w) and 0.34~359.19 pg/g-d.w (mean value: 114.65 pg/g-d.w.) respectively. Also, toxic equivalent (TEQ) concentration of PCDD/Fs and Co-PCBs were ranged from N.D.~5.12 (mean value: 0.88) pg I-TEQ/g-d.w and N.D.~0.58 (mean value: 0.09) $WHO_{2005}$-TEQ pg/g-d.w. respectively. The upstream indicate the highest concentration and as it goes to the downstream, it has tendency to decrease. Higher chlorinated compounds were dominant in most of site which detected PCDD/Fs. Occurrence of Co-PCBs isomer patterns appear similar to each sampling site was found. The isomer patterns showed similar between sediment and PCB products. The principal component analysis also showed that the samples contained the characteristics of PCBs products.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.376-391
• /
• 2010

To investigate seasonal variation and species composition by depth layers in the deep sea ecosystem of the East Sea of Korea, bottom trawl survey was conducted at 4 depth layers during spring and autumn from 2007 to 2009. A total of 47 species were collected and were composed of 23 fish species, 9 crustacea, 6 cephalopoda and 9 gastropoda. The main dominant species at each depth layers were Chionoecetes opilio in 300m, Berryteuthis magister in 500m, Chionoecetes japonicus in 700m and 900m. In spring, richness indices (R) showed low value of 2.01 in 500m depth, and high value of 2.16 in 300m depth. Diversity indices (H') showed low value of 1.53 in 300m depth, and high value of 2.09 in 700m depth. Dominance indices (D) showed low value of 0.15 in 700m depth, and high value of 0.31 in 300m depth. In Autumn, richness indices showed low value of 1.48 in 900m depth, and high value of 2.69 in 300m depth. Diversity' indices (H') showed low value of 1.13 in 300m depth, and high value of 2.23 in 700m depth. Dominance indices (D) showed low value of 0.14 in 700m depth, and high value of 0.54 in 300m depth. In spring, similarity analysis in each depth layers showed the difference between 900m and othe depth layer, on the contrary 500m and 700m showed the similarity. In autumn, similarity analyssis in each depth layers showed the difference between 700m and other depth layers, on the contrary 300m and 500m showed the similarity.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.70-83
• /
• 2018

Korea's five leading industries-chemical, automobile, shipbuilding, metal and electronics-have been the growth engines of the Korean economy for the last 30 years. However, with their performance weakening in the past few years, Korea's annual growth rate has dropped to less than 2%. Just as the Japanese economy struggled through the lost decades, Korea's leading industries have been facing signals of arriving at a Strategic Inflection Point ("SIP") since the mid-2000s. The objective of this study is to present an appropriate value strategy for Korean firms in leading industries to gain sustainable competitive advantages. This paper examines the following issues : First, it diagnoses the signs and timing of SIP for the five leading industries. Second, this study examines 78 Korean and Japanese firms in order to understand the adaptation strategies of the highest and lowest performing firms from a value strategy point of view. Third, it empirically analyzes the correlation between the indicators of value strategy and the accounting performances of the Korean and Japanese firms. The data set used in the cluster analysis were collected from KISLINE database of NICE Information Service and annual reports. The findings in the case analyses of high and low performing companies show that high value-added specialty chemical materials and electronic component manufacturers that had a strong focus on value creation were defined as high performing companies. And in the cosmetic and automobile industries, companies with a strong emphasis on value appropriation gained high performance. Furthermore, the study conducted a cluster analysis based on two indicators R&D and advertisement expense. The analysis shows that a significant gap exists in the operating incomes among three groups classified under the value strategy. The study recommends that Korean firms are requested to increase R&D expenditure, conduct M&A and collaborate with companies that own source technologies to narrow the technology gap and improve their segment portfolio from commodity to value-added products.