• 한국수산과학회지
• /
• 제4권2호
• /
• pp.43-46
• /
• 1971

1. 상이한 투이와 저질 조건들이 Penaeus orientalis의 성장률에 미치는 영향에 관하여 연구하였다. 2. 부화 후 일수 (D)와 P. orientalis의 두흉갑장(L) 간의 관계는 아래의 식으로 표시된다. 투이 및 이질 저토구: L=0.3939D+ 6.8965 투이 및 사질 저토구: L=0.2652D+12.2620 무투이 및 사질 저토구: L=0.0713D+16.0655 무투이 및 이질 저토구: L=0.2852D+7,8620 3. 이질 저토구 내의 P. orientalis의 두흉갑 성장률은 투이 여부와는 관계없이 사질 저토구의 그것보다 높다.

• 천문학논총
• /
• 제32권1호
• /
• pp.117-121
• /
• 2017

We show Akari data, Herschel data and data from the SCUBA2 camera on JCMT, of molecular clouds. We focus on pre-stellar cores within the clouds. We present Akari data of the L1147-1157 ring in Cepheus and show how the data indicate that the cores are being externally heated. We present SCUBA2 and Herschel data of the Ophiuchus region and show how the environment is also affecting core evolution in this region. We discuss the effects of the magnetic field in the Lupus I region, and how this lends support to a model for the formation and evolution of cores in filamentary molecular clouds.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.349-353
• /
• 2009

We propose a simple in-line variable optical attenuator (VOA) based on the bending effect of tapered single mode fibers. The influence of the taper structure and the reflective index of the external medium surrounding the taper region on the bending loss of the tapered fiber have been investigated experimentally. An attenuation range exceeding 35 dB and a very low excess loss of < 0.2 dB at 1550 nm were achieved. The measured polarization dependent loss of the present VOA at the attenuation level of 10 dB, 20 dB, and 30 dB were 0.1 dB, 0.2 dB, and 0.5 dB, respectively.

• 오토저널
• /
• 제5권1호
• /
• pp.32-44
• /
• 1983

In case of $K_{Imax}$ < $K_{Iscc}$, the corrosion fatigue of high strength steel in 0.1N $H_{2}$S $O_{4}$ solution and 3.5% salt water is as follows. 1. The fatigue life shortens in order of 3.5% salt water and 0.1N $H_{2}$S $o_{4}$ solution. 2. The fatigue crack growth rate in air is obtained as the following equation. (dc/dN)$_{atr}$=7.23*10$^{-6}$ (.DELTA. K)$^{2.23}$ 3. The corrosion fatigue crack growth rate in environment is divided into three regions, that is, First Region, Second Region and Third Region from the small cyclic stress intensity. 4. The formation rate of the active surface on metal is slower than the mechano-chemical reaction rate in First Region. The crack growth rate depends on time and the cyclic stress intensity and is expressed as the following equation. (dc/dN)$_{I}$=C(/DELTA. K)$^{\delta}$ 5. The formation rate of the active surface is faster than the mechano-chemical reaction rate in Second Region and the synergistic effect by stress and corrosion becomes slow. In case the fatigue load is large, we have the critical crack growth rate which is not related to the cyclic stress intensity. 6. The corrosion crack growth rate by the mechano-chemical reaction is the same in $H_{2}$S $O_{4}$ solution and salt water, so Hydrogen accelerates the crack growth. 7. The environment has no effect on the corrosion fatigue crack growth rate in Third Region. 8. In First Region and Second Region, dimple is observed on the fatigue fracture surface in 0.1N $H_{2}$S $O_{4}$ solution. 9. The striation is observed in any environment as in air in Third Region and its interval approximately coincide with the crack growth rate.ate.e.e.

• 한국전산구조공학회논문집
• /
• 제29권5호
• /
• pp.471-482
• /
• 2016

이 연구에서는 p-version 동적무한요소법을 도입함으로써 FE-IE 기법에 기반한 KIESSI-3D 프로그램의 속도향상에 역점을 두었다. KIESSI-3D의 성능을 평가하기 위해 8가지 실규모 SSI 문제에 대한 수치해석을 수행하였다. 이를 위해 근역지반 모델의 반경($r_0$)이 구조물기초 반경(R)의 1.2배, 1.5배, 3.0배인 KIESSI-3D 해석모델을 고려하였다. 또한 SASSI2010 프로그램을 이용한 SSI 해석을 수행하였으며, 이 결과를 KIESI-3D에 의한 결과와 정확성 및 계산속도를 비교하였다. 수치해석 결과, 인 KIESI-3D 모델을 사용하면 정확한 해석을 수행할 수 있음을 알 수 있었다. 계산속도 측면을 보면, 새로운 KIESSI-3D의 해석속도는 기존 KIESSI-3D에 비해 최대 25배 빠른 것으로 나타났다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권2호
• /
• pp.763-774
• /
• 2015

Hand posture recognition has been a wide region of applications in Human Computer Interaction and Computer Vision for many years. The problem arises mainly due to the high dexterity of hand and self-occlusions created in the limited view of the camera or illumination variations. To remedy these problems, a hand posture recognition method using 3-D point cloud is proposed to explicitly utilize 3-D information from depth maps in this paper. Firstly, hand region is segmented by a set of depth threshold. Next, hand image normalization will be performed to ensure that the extracted feature descriptors are scale and rotation invariant. By robustly coding and pooling 3-D facets, the proposed descriptor can effectively represent the various hand postures. After that, SVM with Gaussian kernel function is used to address the issue of posture recognition. Experimental results based on posture dataset captured by Kinect sensor (from 1 to 10) demonstrate the effectiveness of the proposed approach and the average recognition rate of our method is over 96%.

• 대한전자공학회논문지SD
• /
• 제40권5호
• /
• pp.285-289
• /
• 2003

본 논문에서는 실리콘 기판상의 전송선로 특성을 개선하기 위하여 표면 마이크로머시닝 기술과 새로운 산화법(H₂O/O₂ 분위기에서 500℃, 1시간 열산화와 1050℃, 2 분간 RTO(Rapid Thermal Oxidation) 공정)을 이용하여 10 ㎛ 두께의 다공질 실리콘 산화막(oxidized porous silicon:OPS) air-bridge 기판 위에 공면 전송선로(Coplanar Waveguide:CPW)를 제작하였다. 간격이 40 ㎛ 신호선이 20 ㎛ 전송선 길이가 2.2 mm인 CPW air-bridge 전송선의 삽입손실은 4 GH에서 -0.28 dB이며, 반사손실은 -22.3 유를 나타내었다. OPS air-bridge 위에 형성된 CPW의 손실이 OPS층 위에 형성된 CPW의 삽입손실보다 약 1 dB 정도 적은 것을 보여주었으며, 반사손실은 35 GHz 범위에서 약 -20 dB를 넘지 않고 있다. 이와 같은 결과로부터 두꺼운 다공질 실리콘 멤브레인 및 air-bridge 구조는 고 저항 실리콘 집적회로 공정에서 고성능, 저가의 마이크로파 및 밀리미터파 회로 응용에 충분히 활용 될 수 있으리라 기대된다.

• 한국유체기계학회 논문집
• /
• 제10권2호
• /
• pp.32-40
• /
• 2007

The present study investigated local pressure drop in a rotating smooth square duct with turning region. The duct has a hydraulic diameter $(D_h)$ of 26.7mm and a divider wall of 6.0mm or $0.225D_h$. The distance between the tip of the divider and the outer wall of the duct is $1.0D_h$. The Reynolds number (Re) based on the hydraulic diameter is kept constant at 10,000, and the rotation number (Ro) is varied from 0.0 to 0.20. The pressure coefficient distribution $(C_p)$, the friction factor (f) and the thermal performance $({\eta})$ are presented on the leading, the trailing and the outer surfaces. It is found that the curvature of the $180^{\circ}-turn$ produces Dean vortices that cause the high pressure drop in the turning region. The duct rotation results in the pressure coefficient discrepancy between the leading and trailing surfaces. That is, the high pressure values appear on the trailing surface in the first-pass and on the leading and side surfaces in the second-pass. As the rotation number increases, the pressure discrepancy enlarges. In the fuming region, a pair of the Dean vortices in the stationary case transform into one large asymmetric vortex cell, and then the pressure drop characteristics also change.

• 생명과학회지
• /
• 제11권2호
• /
• pp.133-137
• /
• 2001

The molecular taxonomic relationship of nine species in the genus Moniliella Stolk & Dakin and Trichosporonoides Haskins & Spencer and six species of other yea나-like fungi was examined by sequencing analysis of large subunit rDNA D1/D2 variable domain. The fifteeen species fell into two major groups corresponding with their genetic relationships. The nine species of the genus Moniliella and Trichosporonoides were placed at the same cluster. similarity values based on the D1/D2 domain sequences were 45.4-100% among species of genus Moniliella, 45.2-84.4% among genus Trichosporonoides species, and 45.6-90.1% among species of genus Moniliella and Trichosporonoides. Identical sequence similarity was observed between M. suaveolens var. nigra and M. suaveolens. A colse relationship of M. mellis. and M. acetoabutens is observed. The result of this study provided and insight into the genetic origins of genus Moniliella and Trichosporonoides species as well as their genetic relationships. Genus Moniliella and Trichosporonoides are closely related to each other based on sequence analysis of the large subunit rDNA D1/D2 region and we suggest combination of the genus Moniliella and Trichosporonoides to single genus.

• 환경생물
• /
• 제34권1호
• /
• pp.18-29
• /
• 2016

김 양식을 하고 있는 해역의 물리 화학적인 해양환경 특성, 식물플랑크톤 색소 조성과 농도, 식물플랑크톤 및 방사무늬김의 일차 생산력을 2014년 3월에 김 양식이 이루어지고 있는 만호해역에서 조사를 하였다. 수온은 $9.1{\sim}9.6^{\circ}C$, 염분은 32.5~33.1이었고, 투명도는 높은 탁도로 인하여 유광층이 낮아져 0.7~1.5 m를 보였다. 수층의 용존 무기질소, 용존 무기인 및 규산 규소 각각의 농도는 $3.59{\sim}5.73{\mu}M$, $0.16{\sim}0.41{\mu}M$, $12.41{\sim}13.94{\mu}M$이었다. 클로로필 a 농도는 $0.51{\sim}1.25{\mu}g\;L^{-1}$이었고, $0.7{\sim}20{\mu}m$ 범위의 nanoplankton의 클로로필 a 농도가 58%를 차지하였다. 규조류의 marker 색소인 fucoxanthin의 농도는 $0.51{\sim}1.25{\mu}g\;L^{-1}$로서 전 정점에서 높은 값이었고, $20{\sim}200{\mu}m$ 범위의 fucoxanthin이 64%를 차지하였다. 식물플랑크톤에 의한 일차 생산력은 $57.72{\pm}4.67(51.05{\sim}66.71)mg\;C\;m^{-2}\;d^{-1}$이었고, $0.7{\sim}20{\mu}m$ 범위의 nanoplankton이 76.9%를 차지하였으며, 면적을 고려한 일차 생산력은 $11,337kg\;C\;d^{-1}$이었다. 방사무늬김에 의한 평균 일차 생산력은 $1,926{\pm}192(1,102{\sim}2,597)mg\;C\;m^{-2}d^{-1}$이었고, 면적을 고려한 일차 생산력은 $39,295kg\;C\;d^{-1}$이었다. 식물플랑크톤과 방사무늬김에 의한 일차 생산력을 토대로 계산된 만호해역의 일차 생산력은 $50,632kg\;C\;d^{-1}$로 나타났다. 만호해역의 식물플랑크톤에 의한 일차 생산력이 다른 해역보다 낮고, 김의 일차 생산력이 식물플랑크톤의 일차 생산력보다 약 3.5배 높았다.