• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 2000.04a
• /
• pp.53-60
• /
• 2000

Strain BH5 was isolated from naturally fermented Kimchi and identified as a bacteriocin producer, which has bactericidal activity against Micrococcus flavus ATCC 10240. Strain BH5 was identified tentatively as Lactococcus lactis by the API test and some characteristics. Lactococcus lactis BH5 showed a broad spectrum of activity against most of the non-pathogenic and pathogenic microorganisms tested by the modified deferred method. The activity of lacticin BH5, named tentatively as the bacteriocin produced by Lactococcus lactis BH5, was detected at the mid-log growth phase, reached its maximum during the early stationary phase, and decreased after the late stationary phase. Lacticin BH5 also showed a relatively broad spectrum of activity against non-pathogenic and pathogenic microorganisms as tested by the spot-on-lawn method. Its antimicrobial activity on sensitive indicator cells was completely disappeared by protease XIV or ${\alpha}$-chymotrypsin. The inhibitory activities of lacticin BH5 were detected during treatments up to 100$^{\circ}C$ for 30 min. Lacticin BH5 was very stable over a pH range of 2.0 to 9.0 and was stable with all the organic solvents examined. The cell concentration and bacteriocin production in strain BH5 were maximum when grown at 30$^{\circ}C$ in a modified MRS medium supplemented with 0.5% tryptone, 1.0% yeast extract, and 0.5% beef extract as nitrogen sources. It demonstrated a typical bactericidal mode of inhibition against Micrococcus flavus ATCC 10240. Lacticin BH5 was purified through ammonium sulfate precipitation, ethanol precipitation, and CM-Sepharose column chromatography. The apparent molecular mass of lacticin BH5 was estimated to be in the region of 3.7 kDa, by the direct detection of bactericidal activity after SDS-PAGE. Mutant strain NO141 which was isolated by nitrosoguanidine mutagenesis produced about 4 fold more bacteriocin than the wild type.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.561-567
• /
• 2004

The influence of ultrasound frequency, dissolved gases, and initial concentration on the decomposition of sodium dodecylbenzene sulfonate(DBS) aqueous solution was investigated using ultrasound generator with 200 W ultrasound power. The decomposition rates at three frequencies(50, 200, and 600 kHz) examined under argon atmosphere were highest at 200 kHz. The highest observed decomposition rate at 200 kHz occurred in the presence of oxygen followed by air and argon, helium, and nitrogen. The effect of initial concentration of DBS on the ultrasonic decomposition was decreased with increasing initial concentration and would depend upon the formation of micelle in aqueous solution. It appears that the ultrasound frequency, dissolved gases, and initial concentration play an important role on the sonolysis of DBS. Sonolysis of DBS mainly take place at the interfacial region of cavitation bubbles by both OH radical attack and pyrolysis to alkyl chain, aromatic ring, and headgroup.

• Food Science of Animal Resources
• /
• v.41 no.4
• /
• pp.664-673
• /
• 2021

This study aimed to investigate the influence of Astragalus membranaceus (AM), Adenophora triphylla (AT), and Ulmus pumila (UP) extracts on the quality traits, palatability, and storage stability of sous-vide (SV) cooked chicken breasts. Chicken breasts were marinated in AM, AT, or UP extracts for 1 h, and then consistently cooked at a constant temperature of 60℃ for 2 h. SV cooked chicken breasts with the UP extract exhibited lower lightness and higher yellowness values on the surface region compared to those with the AM and AT extracts (p<0.05). The control and UP groups displayed a similar overall visual acceptability (p>0.05), although the UP group had lower color acceptability (p<0.01). The UP group also had higher flavor and lower off-flavor intensities compared to the control group (p<0.05), although similar scores were observed in tenderness attributes and juiciness among the groups (p>0.05). Owing to these results regarding overall sensory acceptability, samples from the UP group were more preferred by the trained panelists compared to samples from the control group (p<0.001). On 14 d of cold storage, all the groups with herbal medicinal extracts exhibited a lower concentration of thiobarbituric acid-reactive substances than the control group (p<0.05), and the AT and UP groups showed lower values compared to the AM group due to their higher flavonoid contents (p<0.001). Therefore, meat marination with herbal plant extracts before SV cooking can be effective for enhancing the overall quality of SV cooked chicken breast.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1406-1409
• /
• 2018

We have frequently encountered the rapid changes that prevalent opinion of the social community is toppled by a new and opposite opinion against the pre-exiting one. To understand this interesting process, mean-field model with infinite-interaction range has been mostly considered in previous studies S. A. Marvel et al., Phys. Rev. Lett. 110, 118702 (2012). However, the mean-field interaction range is lack of reality in the sense that any individual cannot interact with all of the others in the community. Based on it, in the present work, we consider a simple model of opinion consensus so-called basic model on the low-dimensional lattices (d = 1, 2) with finite interaction range. The model consists of four types of subpopulations with different opinions: A, B, AB, and the zealot of A denoted by $A_c$, following the basic model shown in the work by S. A. Marvel et al.. Comparing with their work, we consider the finite range of the interaction, and particularly reconstruct the lattice structure by adding new links when the two individuals have the distance < ${\sigma}$. We explore how the interaction range ${\sigma}$ affects the opinion consensus process on the reconstructed lattice structure. We find that the critical fraction of population for $A_c$ required for the opinion consensus on A shows different behaviors in the small and large interaction ranges. Especially, the critical fraction for $A_c$ increases with the size of ${\sigma}$ in the region of small interaction range, which is counter-intuitive: When the interaction range is increased, not only the number of nodes affected by $A_c$ but also that affected by B grows, which is believed to cause the increasing behavior of the critical fraction for $A_c$. We also present the difference of dynamic process to the opinion consensus between the regions of small and large interaction ranges.

• Archives of Plastic Surgery
• /
• v.49 no.2
• /
• pp.174-183
• /
• 2022

Management of traumatic skull base fractures and associated complications pose a unique reconstructive challenge. The goals of skull base reconstruction include structural support for the brain and orbit, separation of the central nervous system from the aerodigestive tract, volume to decrease dead space, and restoration of the three-dimensional appearance of the face and cranium with bone and soft tissues. An open bicoronal approach is the most commonly used technique for craniofacial disassembly of the bifrontal region, with evacuation of intracranial hemorrhage and dural repair performed prior to reconstruction. Depending on the defect size and underlying patient and operative factors, reconstruction may involve bony reconstruction using autografts, allografts, or prosthetics in addition to soft tissue reconstruction using vascularized local or distant tissues. The vast majority of traumatic anterior cranial fossa (ACF) injuries resulting in smaller defects of the cranial base itself can be successfully reconstructed using local pedicled pericranial or galeal flaps. Compared with historical nonvascularized ACF reconstructive options, vascularized reconstruction using pericranial and/or galeal flaps has decreased the rate of cerebrospinal fluid (CSF) leak from 25 to 6.5%. We review the existing literature on this uncommon entity and present our case series of n = 6 patients undergoing traumatic reconstruction of the ACF at an urban Level 1 trauma center from 2016 to 2018. There were no postoperative CSF leaks, mucoceles, episodes of meningitis, or deaths during the study follow-up period. In conclusion, use of pericranial, galeal, and free flaps, as indicated, can provide reliable and durable reconstruction of a wide variety of injuries.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.469-480
• /
• 2017

This study aims to understand the relationship between lineaments and epicenters in Geochang region, Gyungsangnam-do, South Korea. An instrumental observation of earthquakes has been started by Korea Meteorological Administration (KMA) since 1978 and there were 6 earthquakes with magnitude ranging 2 to 2.5 in Geochang region from 1978 to 2016. Lineaments were extracted from LANDSAT 8 satellite image and shaded relief map displayed in 3-dimension using Digital Elevation Model (DEM). Then, lineament density was statistically examined by hotspot analysis. Hexagonal grids were generated to perform the analysis because hexagonal pattern expresses lineaments with less discontinuity than square girds, and the size of the grid was selected to minimize a variance of lineament density. Since hotspot analysis measures the extent of clustering with Z score, Z scores computed with lineaments' frequency ($L_f$), length ($L_d$), and intersection ($L_t$) were used to find lineament clusters in the density map. Furthermore, the Z scores were extracted from the epicenters and examined to see the relevance of each density elements to epicenters. As a result, 15 among 18 densities,recorded as 3 elements in 6 epicenters, were higher than 1.65 which is 95% of the standard normal distribution. This indicates that epicenters coincide with high density area. Especially, $L_f$ and $L_t$ had a significant relationship with epicenter, being located in upper 95% of the standard normal distribution, except for one epicenter in $L_t$. This study can be used to identify potential seismic zones by improving the accuracy of expressing lineaments' spatial distribution and analyzing relationship between lineament density and epicenter. However, additional studies in wider study area with more epicenters are recommended to promote the results.

• 한국체육학회지인문사회과학편
• /
• v.54 no.1
• /
• pp.535-544
• /
• 2015

This study was performed to determine the effect of low-intensity resistance training with blood flow restriction (BFR) on muscle volume and strength in elderly women. Sixteen elderly women (70.9±4.6 years) were divided into low (30% 1RM) and high (75% 1RM) intense resistance training groups. Tourniquet cuff (Zimmer, Germany) for BFR was applied only to the right leg during the training period. All subjects performed unilateral leg press, leg extension and leg curl (3 sets×12 repetitions) for 10 weeks (2d/wk). Blood pressure was increased from 110 to 240 mmHg during the training period at the most proximal region of exercised leg. Muscle volume and cross-sectional area (CSA) were measured by MRI and body composition was monitored by dual-energy X-ray absorptiometry (DEXA) and isokinetic muscular strength were analyzed in both legs. The quadriceps CSA (15.2%, p<.001) and muscle volume (13.8%, p<.001) were increased in high-intense trained leg with BFR and the increased rate was highest among groups. The quadriceps CSA (9.8%, p<.001) and muscle volume (6.9%, p<.001) were increased in low-intensity training group with BFR and their increased rates were higher than control groups. The strength by exercise training was significantly improved in all groups and tended to be higher in BFR groups. These results demonstrate low-intensity resistance training with blood flow restriction could be an effective way to improve muscle volume and strength in elderly women.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.36-43
• /
• 2012

Purpose: To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. Materials and methods: Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ${\phi}4.0mm{\times}11.5mm$ Osstem$^{(R)}$ USII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture's external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group's implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. Results: The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2mm, there was no significant influence on the stress distribution. Conclusion: For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.12 no.1
• /
• pp.27-33
• /
• 1982

The purpose of this study is to obtain some informations for the differential diagnosis of ameloblastoma from dentigerous cyst by analysis of the radiographic findings of these lesions. The author studied age and sex distribution, the site of the lesion, tooth behavior and several radiographic features of ameloblastoma and dentigerous cyst. The material consisted of 65 patients of ameloblastoma and 37 patients of dentigerous cyst. The results were obtained as followings. 1) The incidence was highest in 2nd decade (29.2%) and total 65 cases consists of 35 males (53.8%) and 30 females (46.2%) in ameloblastoma. 62 cases were found in lower jaw (95.4%) and the highest site of occurence of ameloblastoma was mandibular molar. region 27 cases. (41.5%) 2) In 65 cases of amelobl!!stoma, 18 cases were seen in association with tooth and 15 cases (83.2%) out of those were associated with mandibular molar teeth. Mandibular molar were most frequently involved in dentigerous cyst (11/31 cases, 29.7%). 3) (a) 23 cases (35.3%) of tooth resorption were found in ameloblastoma and 11 cases (29.7%) of tooth resorption were found in dentigerous cyst. (b) 15 cases (23.1%) of tooth migration were found in ameloblastoma and 10 cases (27.0%) of tooth migration were found in dentigerous cyst. 4) Several radiographic features. (a) Monolocular type ameloblastoma were seen in 23 cases (35.4) and multilocular type of ameloblastoma were seen in 42 cases (64.6%). Monolocular type of dentigerous cyst were seen in 33 cases (89.2%) and multilocular type was seen in 4 cases. (b) Monolocular type ameloblastoma showed 20 cases (87.0%) of scalloped border but 32 cases (97.0%) of dentigerous cyst showed smooth border. (c) 34 cases (81.0%) of ameloblastoma showed honey-comb appearance, soap-bubble appearance or mixed appearance. but all 4 cases of dentigerous cyst showed multicystic appearance. (d) 12 cases (52.2%) of monolocular type ameloblastoma showed slightly increased radiopacity in surrounding bone, and 22 cases (66.7%) of monolocular type dentigerous cyst showed sharp osteosclerotic border. 27 cases (64.3%) of multilocular type ameloblastoma and 3 cases (75.0%) of multilocular type dentigerous cyst showed no changes in surrounding bone.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.689-698
• /
• 2007

This study aims to estimate the genetic parameters for carcass traits on Hanwoo of breeding farmhouses using Animal Products Grading Service’s data of 428,812 cattle from 101 slaughterhouses nationwide from 2000 to 2005. Using carcass traits of carcass weight, eye muscle area, backfat thickness, marbling score, meat color and fat color that greatly influence Hanwoo's grade, the effects of carcass year, carcass season, sex and carcass region were estimated. Based upon carcass traits of carcass weight, eye muscle area, backfat thickness, marbling score and meat color that greatly influence Hanwoo’s grade, the heritabilities and genetic parameters were estimated of 17,578 Hanwoo slaughtered in 2005 with existing herdbook, where EM-REML algorithm was used in estimating genetic parameters. The mean and standard deviation of each carcass trait are 321.42±53.62kg, 76.25±10.43cm2, 9.96± 4.14mm, 3.75±2.00, 4.83±0.48 and 2.99±0.40, for carcass weight, eye muscle area, backfat thickness, marbling score, meat color and fat color, respectively. As a result of analysis on the effects of carcass year, the carcass weight, backfat thickness and meat color came out highest as 359.40±0.181, 9.82±0.017 and 4.90±0.002, respectively in 2004. As a result of analysis on the effects of carcass season, the carcass weight and eye muscle area came out highest as 345.88±0.144 and 79.57±0.033 respectively in spring, and the backfat thickness was highest as 8.78±0.013 in winter, and the meat color and fat color slightly came out higher as 4.88±0.002 and 2.96±0.001 in fall, while the marbling score was highest as 3.29±0.006 in summer. The results of the analysis on the effects of sex indicated that the backfat thickness and fat color were highest as 10.53±0.010 and 3.07±0.001 in cow, the carcass weight came out highest in Hanwoo steer as 368.03±0.068kg, the eye muscle area were highest as 82.96±0.042 in bull, and the marbling score was highest as 4.19±0.007 in steer, and the meat color was highest as 4.89±0.001 in cow. Regarding the results of analysis on the effects of carcass region, the carcass weight, eye muscle area,