• 한국식품과학회지
• /
• 제29권4호
• /
• pp.771-775
• /
• 1997

본 연구는 병원성 Escherichia coli O157:H7 균주에 의한 식중독을 미연에 예방하고자 우육에 본 균주를 오염, 동결시켜 전자선에 의한 살균효과를 조사하였다. $37^{\circ}C$에서는 배양 16시간째에 최대균수를 나타내었고 $4^{\circ}C$에서는 균주의 증식이 거의 없었다. E. coli O157:H7 균주는 대수기나 정지기 모두가 $0^{\circ}C$ (chilled)와 $-18^{\circ}C$ (frozen)에서 배양시 약 $10^{7}\;CFU/mL$의 균수를 나타내었고 $-18^{\circ}C$에서는 $20^{\circ}C$ 보다 균주의 사멸율이 높았다. 동결육에 오염된 E. coli O157:H7 균주의 방사선 감수성은 $D_{(10)}$ 값이 0.45 kGy, 불활성화계수가 $3{\sim}5\;kGy$에서 $6.67{\sim}11.11$로 각각 나타났다. 본 결과로서 전자선 조사는 동결육에 오염된 E. coli O157:H7 균주의 제거방법으로 매우 효과가 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.635-635
• /
• 2013

We report three-dimensional polycrystalline anatase TiO2 structures (3D a-TiO2) for environmental and bio-medical applications. The 3D a-TiO2 was synthesized without thermal treatment by the growth of rod-like polycrystals on Degussa P25 (P25) via low temperature (< $85^{\circ}C$) modified alkali hydrothermal processing. X-ray diffraction and high-resolution transmission electron microscopic results showed that the rod-like polycrystals of 3D a-TiO2 possessed the highly anatase nanostructures. The photocatalytic activity of 3D a-TiO2 was found to be 2.2 times higher than that of P25. The recyclability of the 3D a-TiO2 was found to be high: the decolorization rate was 94.8% of the initial value after fifteen cycles. In addition, 3D a-TiO2 exhibited excellent antibacterial activities for the sterilization of gram-negative Escherichia coli (E. coli) and gram-positive Staphylococcus aureus (S. aureus). Even at the 10th recycled use, more than 98.4% of E. coli and S. aureus can be killed. These results indicated that 3D a-TiO2 might have utility in several promising applications such as photocatalytic water/air purification and bactericidal agents.

• 한국광학회지
• /
• 제11권6호
• /
• pp.405-410
• /
• 2000

방향성 결합기의 성능개선을 위해 입사광과 결합기 도파모드와의 전이계수를 조절하여 $Cv_e$ 와 $Cv_o$ 의 차이, $Cv_e-Cv_o$ 를 줄임으로써 소멸비를 향상시키는 방안을 제안한다. 입력 도파로와 결합기의 접합부에서 입력 도파로를 수평 이동시키는 방식과 곡선형 입력 도파로의 도파모드 편향성을 이용한 방식을 혼합하여 적용해서 전이계수와 손실을 최적화하고 소멸비와 제작상의 허용오차를 월등히 개선한다. 주어진 도파로 구조의 경우 유효굴절률법과 MPA를 사용하여 분석한결과 곡률 반경이 $300\mu\textrm{m}$이고 접합위치의 수평이동이 $0.1\mu\textrm{m}$인 입력 도파로의 채택으로 최대 소멸비는 -39 dB로 낮출 수 있으며 -30dB 소멸비 기준에서의 방향성 결합기의 결합길이에 대한 제작 허용오차 폭은 $57.19\mu\textrm{m}$에 이르게 되었다. 이는 수평 이동을 고려하지 않는 직선형 입력 도파로에 비하여 최대 소멸비의 향상은 6dB 제작 허용오차 폭은 $13.9\mu\textrm{m}$ 향상시킨 결과이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.136-140
• /
• 1992

The purpose of this research is to develop the lithium secondary battery. This paper describes the preparation, electrochemical properties of nontstoichiometric(NS)-$V_6O_{13}$ and characteristics of Li/$V_6O_{13}$ secondary battery. NS-$V_6O_{13}$ was prepared by thermal decomposition of $NH_4VO_3$ under Ar stream of 140ml/min~180ml/min flow rate. And then, this NS-$V_6O_{13}$ was used for cathode active material. Cathode sheet was prepared by compressing the composite of NS-$V_6O_{13}$, acetylene black(A.B) and teflon emulsion (T.E). Characteristics of the test cell are summarised as follows. Oxidation capacity of NS-$V_6O_{13}$ was about 20% less than its reduction capacity. A part of NS-$V_6O_{13}$ cathode active material showed irreversible reaction in early charge-discharge cycle. This phenomena seems to be caused by irreversible incoporation/discoporation of lithium cation to/from NS-$V_6O_{13}$ host. Discharge characteristics curve of Li/$V_6O_{13}$ cell showed 4 potential plateaus. Charge-discharge capacity was declined in the beginning of cycling and slowly increased in company with increasing of coulombic efficiency. Energy density per weight of $V_6O_{13}$ cathode material was as high as 522Wh/kg~765Wh/kg.

• 전자공학회논문지D
• /
• 제34D권12호
• /
• pp.14-21
• /
• 1997

This study was conducte dto fabricate 2GHz circulator using Ca,Sn substituted UIG(yttrium iron garnet)ceramics. When the electric, magnetic and microwave properties were measured in Ca, Sn substituted YIG, the measured perimittivity and perfmeability in microwave frequencies were 16.25, 0.8964. For $Y_{2.4}$C $a_{0.3}$A $n_{0.3}$F $e_{3.5}$A $l_{1.5}$ $O_{12}$ garnet ceramics sintered at 1400.deg. C, the ferrimagnetic resonance line width (.DELTA.H) at 10GHz was 53 Oe and saturation magnetization was 375G. The strip-line circulator was simulated with 3-D FEM (finite element method) software and designed at the center frequency of 2GHz. The fabricated strip-line junction circulator using above YIG ceramics had insertion loss of 1.271dB, return loss of 23.843dB, isolation of 21.751dB at the center frequency 1.855GHz.z.z.z.z.z.z.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제12권3호
• /
• pp.15-26
• /
• 2006

Nowadays, it has been changed in medical environments which are the increase of the aged and chronic disease, development of medical system and technology, the open of medical markets according to negotiation of DDA(Doha Development Agenda) and FTA(Free Trade Agreement) and so on. The changes of medical system and function are caused by changes of medical environments. This study is to analyze the spatial changes of general hospital O. P. D. in Korea based on changes of the medical system and function. In conclusion, the O. P. D. in general hospital has been changed by stages as follows; First, subdivision and specialization of medical organization systems. Second, diversification of specialized centers based on medical cooperated systems. At last, integration of E&T faculties and specialized centers which have similar functions. According to the spatial changes of outpatient department, the types of E&T faculties and specialized centers has been changed by diverse forms as follows; E&T faculties and specialized centers focused on disease, organs, classes and so on.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.265-265
• /
• 2012

The adsorption of molecular $NH_3$ on rutile $TiO_2(110)-1{\times}1$ surfaces was investigated using a temperature-programmed desorption (TPD) technique combined with a molecular beam apparatus. A quantitative investigation into the TPD spectra of $NH_3$ was made for $NH_3$ adsorbed on two kinds of rutile $TiO_2(110)-1{\times}1$ surfaces with the oxygen vacancy ($V_O$) concentration of ~0% (p-$TiO_2(110)$) and ~5% (r-$TiO_2(110)$), respectively. On both surfaces, non-dissociative adsorption of $NH_3$ was inferred from a quantitative analysis on the amount of adsorbed $NH_3$ and those desorbed. With increasing coverage, the monolayer desorption feature shifted from 400 K toward lower temperatures until it saturates at 160 K, suggesting a repulsive nature in the interaction between $NH_3$ molecules. At the very low coverage regime, the desorption features were found to extend up to 430 K and 400 K on p-$TiO_2(110)$ and p-TiO(110), respectively. As a result, the saturation coverage of monolayer of $NH_3$ was higher on the p-$TiO_2(110)$ surface than on the p-TiO(110) by about 10%. The desorption energy ($E_d$) of $NH_3$ obtained by inversion of the Polanyi-Wigner equation indicated that the difference between the $E_d$'s of $NH_3$ (that is, $E_d(on\;p-TiO_2(110)$) - $E_d$(on p-TiO(110)) was 14 kJ/mol at ${\theta}(NH_3)=0$ and decreased to 0 as the coverage approached to a monolayer. The observed adsorption behavior of $NH_3$ was interpreted using an interaction model between $NH_3$ and surface defects on $TiO_2$ such as VO's and $Ti^{3+}$ interstitials.

• 전자공학회논문지D
• /
• 제35D권6호
• /
• pp.72-78
• /
• 1998

Ti:LiNbO$_3$ 광도파로위에 CPW 전극 구조를한 광변조기 내부칩을 제작한 후 일련공정에 따라 패키징 작업을 하였고 소자의 전기적특성과 광학적특성을 측정하였다. 광변조기 패키징을 위하여 페룰, 보조용 LN블럭 및 글래스, 진동 및 흡수용패드, 알루미나피더의 부분품을 사용하였으며 피그테일링, Au 와이어본딩, 에폭싱, SMA커넥팅, 실링 작업을 수행하였다. 전기적 특성에서 S/sub 21/은 -3 dB 점에서 9.8GHz의 값을, S/sub 11/은 14.4 GHz 대에서 -8.9 dB 값을 나타내었다. 광학적 특성은 제작된 광도파로가 1550nm 파장대에서 단일모드를 만족하였고, 패키지후 소자의 삽입손실은 실온에서 4.3 dB 이였으며, 소자를 온도감압챔버에 넣은후 5∼45℃까지 온도변화를 주었을 때 4.3∼6.4 dB의 삽입손실을 보였다. E-O bandwidth 응답은 3dB점에서 7.8GHz를 나타내어 10Gbps급 광통신시스템에 응용할수 있음을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.71-71
• /
• 2011

Dye-sensitized solar cells (DSCs) have drawn great academic attention due to their potential as low-cost renewable energy sources. DSCs contain a nanostructured TiO2 photoanode, which is a key-component for high conversion efficiency. Particularly, one-dimensional (1-D) nanostructured photoanodes can enhance the electron transport for the efficient collection to the conducting substrate in competition with the recombination processes. This is because photoelectron colletion is determined by trapping/detrapping events along the site of the electron traps (defects, surface states, grain boundaries, and self-trapping). Therefore, 1-D nanostructured photoanodes are advantageous for the fast electron transport due to their desirable features of greatly reduced intercrystalline contacts with specified directionality. In particular, anodic TiO2 nanotube (NT) electrodes recently have been intensively explored owing to their ideal structure for application in DSCs. Besides the enhanced electron transport properties resulted from the 1-D structure, highly ordered and vertically oriented nanostructure of anodic TiO2 NT can contribute additional merits, such as enhanced electrolyte diffusion, better interfacial contact with viscous electrolytes. First, to confirm the advantages of 1-D nanostructured material for the photoelectron collection, we compared the electron transport and charge recombination characteristics between nanoparticle (NP)- and nanorod (NR)-based photoanodes in DSCs by the stepped light-induced transient measurements of photocurrent and voltage (SLIM-PCV). We confirmed that the electron lifetime of the NR-based photoanode was much longer than that of the NP-based photoanode. In addition, highly ordered and vertically oriented TiO2 NT photoanodes were prepared by electrochemical anodization method. We compared the photovoltaic properties of DSCs utilizing TiO2 NT photoanodes prepared by one-step anodization and two-step anodization. And, to reduce the charge recombination rate, energy barrier layer (ZnO, Al2O3)-coated TiO2 NTs also applied in DSC. Furthermore, we applied the TiO2 NT photoanode in DSCs using a viscous electrolyte, i.e., cobalt bipyridyl redox electrolyte, and confirmed that the pore structure of NT array can enhance the performances of this viscous electrolyte.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.131-133
• /
• 2012

The photoluminescence (PT) properties of Al-doped ZnO thin films grown by the sol-gel dip-coating method have been investigated. At 12 K, nine distinct PL peaks were observed at 2.037, 2.592, 2.832, 3.027, 3.177, 3.216, 3.260, 3.303, and 3.354 eV. The deep-level emissions (2.037, 2.592, 2.832, and 3.027 eV) were attributed to native defects. The near-band-edge (NBE) emission peaks at 3.354, 3.303, 3.260, 3.216, and 3.177 eV were attributed to the emission of the neutral-donor-bound excitons (D0X), two-electron satellite (TES), free-to-neutral-acceptors (e,A0), donor-acceptor pairs (DAP), and second-order longitudinal optical (2LO) phonon replicas of the TES (TES-2LO), respectively. According to Haynes' empirical rule, we calculated the energy of a free exciton (FX) to be 3.374 eV. The thermal activation energy for D0X in the nanocrystalline ZnO thin film was found to be ~25 meV, corresponding to the thermal dissociation energy required for D0X transitions.