• Journal of Sensor Science and Technology
• /
• v.1 no.1
• /
• pp.59-66
• /
• 1992

To develop the highly sensitive TLD radiation sensors, $BaSO_{4}$ : Eu-PTFE TLDs are fabricated by polymerizing the PTFE(polytetrafluoroethylene) with $BaSO_{4}$ : Eu TL phosphors. The $BaSO_{4}$ : Eu TL phosphors having the highest sensitivity of $X/{\gamma}$-rays are obtained by sintering at $1000^{\circ}C$ in $N_{2}$ atmosphere a mixture of $BaSO_{4}$ powder with 1mol% Eu($Eu_{2}O_{3}$), 6mol% $NH_{4}Cl$ and 5mol% $(NH_{4})_{2}SO_{4}$ which were co-precipitated in dilute sulfuric acid and then dried. The activation energy, frequency factor and kinetic order of $BaSO_{4}$ : Eu TL phosphor are 1.17eV, $3.6{\times}10^{11}/sec$ and 1.25, respectively. And the spectral peak of $BaSO_{4}$ : Eu is about 425nm. The optimum TL Phosphor content and thickness of the $BaSO_{4}$ : Eu-PTFE TLD are 40wt% and $105.7mg/cm^{2}$. The optimum polymerization temperature and time for fabrication of $BaSO_{4}$ : Eu-PTFE TLDs are $380^{\circ}C$ and 2 hours in air, respectively. The linear dose range to ${\gamma}$ rays is 0.01-20Gy and fading rate is about 10%/60hours.

• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.162-170
• /
• 2018

To improve the productivity of Pleurotus ostreatus, different conditions of liquid spawn culture were tested. The optimum culture conditions were potato dextrose broth, incubation temperature of $22^{\circ}C$, and pH 6. Fifteen different media ('A' to 'O') containing 0.3% soybean meal (SM) were prepared by varying sugar and glucose contents. The cultures were propagated in SM media for 14 days, at $22^{\circ}C$, and pH 6. Their absorbances were higher after 14 days of incubation in the media containing both sugar and glucose. In particular, the absorbance of media containing 5 to 20% of glucose alone ('C', 'D', 'E', and 'F') tended to increase in the incubation period. Dry cell weight was lower in media containing less than 20% sugar or glucose alone than in media containing 30% sugar ('A') or 30% glucose ('B') alone. In sawdust media, in 900 mL-bottle, the optimum inoculation volume of liquid spawn was 15 to 20 mL. The texture of the mushroom cultivated with the liquid spawn was superior to that cultivated in the solid spawn.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.12
• /
• pp.1659-1664
• /
• 2012

TSAHC [4'-(p-toluenesulfonylamido)-4-hydroxychalcone] is a promising antitumorigenic chalcone compound, especially against TM4SF5 (four-transmembrane L6 family member 5)-mediated hepatocarcinoma. We evaluated the potential of TSAHC to inhibit the catalytic activities of nine cytochrome P450 isoforms and of P-glycoprotein (P-gp). The abilities of TSAHC to inhibit phenacetin O-deethylation (CYP1A2), coumarin 6-hydroxylation (CYP2A6), bupropion hydroxylation (CYP2B6), amodiaquine N-deethylation (CYP2C8), diclofenac 4-hydroxylation (CYP2C9), omeprazole 5-hydroxylation (CYP2C19), dextromethorphan O-demethylation (CYP2D6), chlorzoxazone 6-hydroxylation (CYP2E1), and midazolam 1'-hydroxylation (CYP3A) were tested using human liver microsomes. The P-gp inhibitory effect of TSAHC was assessed by [$^3H$]digoxin accumulation in the LLCPK1-MDR1 cell system. TSAHC strongly inhibited CYP2C8, CYP2C9, and CYP2C19 isoform activities with $K_i$ values of 0.81, 0.076, and $3.45{\mu}M$, respectively. It also enhanced digoxin accumulation in a dose-dependent manner in the LLCPK1-MDR1 cells. These findings indicate that TSAHC has the potential to inhibit CYP2C isoforms and P-gp activities in vitro. TSAHC might be used as a nonspecific inhibitor of CYP2C isoforms based on its negligible inhibitory effect on other P450 isoforms such as CYP1A2, CYP2A6, CYP2B6, CYP2D6, CYP2E1, and CYP3A.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.77-82
• /
• 1969

In order to determine an optimum pressure condition of the storage chamber of apples, several reduced pressure were examined for the Jonathan. The results obtained checking various storage conditions are as follows. 1. The optimum pressure of chamber atmosphere for apple storage was 10 cmHg. 2. Under the pressure of 10 cmHg, the normal (room) temperature storage was better than the cold storage. 3. Under reduced pressure, poly-ethylene film wrapping of apple showed a good result in a short-term (less than one and half month) experiment. 4. No noticeable effect was observed by O.E.D (Oxy-ethylene doxanole) or sodium dehydro acetate treatment. 5. Change of the components (total sugar, reduced sugar, acid and vitamin C) of apples according to the storage methods showed similar results to our previous report, Studies on The Reduced Pressure Storage of Fruits (I)

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.429-432
• /
• 2011

The feasibility of applications of the char obtained from a gasification process of municipal-waste refuse derived fuel (RDF) as an auxiliary fuel was evaluated by combustion experiments. The higher heating value of the RDF char was 3000~4000 kcal/kg and its chlorine content was below the standard requirement demonstrating its potential as an auxiliary fuel. In the combustion exhaust gas, the maximum $NO_x$ and $SO_2$ concentrations were 240 ppm and 223 ppm, respectively. If an aftertreatment is applied, it is possible to control their concentrations low enough to meet the air pollutant emission standard. The HCl concentration was relatively high indicating that a care should be taken for HCl emission from the combustion of RDF. Based on the temperature distribution within the reactor, the concentration change of $O_2$ and $CO_2$, and the amount and the loss on ignition of solid residue, it was inferred that the combustion reaction was the most reliable when the excess air ratio of 1.3 was used.

• Environmental Mutagens and Carcinogens
• /
• v.23 no.3
• /
• pp.99-102
• /
• 2003

IARC classified areca quid as a human carcinogen. Areca quid chewed in Taiwan includes Piper betle inflorescence, which contains high concentrations of safrole (15 mg/fresh weight). Safrole is a documented rodent hepatocarcinogen, and chewing areca quid may contribute to human exposure (420 $\mu$m in saliva). The carcinogenicity of safrole is mediated through 1'-hydroxysafrole formation, followed by sulfonation to an unstable sulfate that reacts to form DNA adducts. Using human liver microsomes and Escherichia coli membranes expressing bicistronic human P450s, CYP2E1 and CYP2C9 were identified as the main P450s involved in the activation of safrole. We have demonstrated the presence of stable safrole-dGMP adducts in human oral tissues following areca quid chewing using $^{32}$ P-postlabeling and HPLC mass spectrometry methods. By studying 88 subjects with a known AQ chewing history and 161 matched controls, we have demonstrated that the presence of safrole-DNA adducts in peripheral blood cells was correlated to AQ chewing, and CYP2E1 seemed to play an important role in the modulation of safrole-DNA adduct formation. We have also shown that safrole can form stable safrole-DNA adducts as well as oxidative damages in rodent liver. However, the stable safrole-DNA adducts may represent a more significant initial lesion as compared to the rapidly repaired safrole-induced 8-hydroxy-2'-deoxyguanosine. This oxidative DNA damage is mediated through the formation of hydoryxchavicol, the major safrole metabolite in human urine. Hydroxychavicol may have gone through two-electron oxidation to the o-quinone; then via one-electron reduction to semiquinone radicals to generate oxidative DNA damage. However, these reactive metabolites can be efficiently conjugated by GSH. These data suggest that safrole may contribute to the initiation of oral carcinogenesis through safrole-DNA adduct and not oxidative DNA damage. In addition, CYP2E1 may modulate this adduct formation.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.602-611
• /
• 2013

We have investigated the influence of system composition and preparation conditions on the particle size of vitamin E acetate (VE)-loaded nanoemulsions prepared by PIC(phase inversion composition) emulsification. This method relies on the formation of very fine oil droplets when water is added to oil/surfactant mixture. The oil-to-emulsion ratio content was kept constant (5 wt.%) while the surfactant-to-oil ratio (%SOR) was varied from 50 to 200 %. Oil phase composition (vitamin E to medium chain ester ratio, %VOR) had an effect on particle size, with the smallest droplets being formed below 60 % of VOR. Food-grade non-ionic surfactants (Tween 80 and Span 80) were used as an emulsifier. The effect of f on the droplet size distribution has been studied. In our system, the droplet volume fraction, given by the oil volume fraction plus the surfactant volume fraction, was varied from 0.1 to 0.3. The droplet diameter remains less than 350 nm when O/S is fixed at 1:1. The droplet size increases gradually as the increasing the volume fraction. Particle size could also be reduced by increasing the temperature when water was added to oil/surfactant mixture. By optimizing system composition and homogenization conditions we were able to form VE-loaded nanoemulsions with small mean droplet diameters (d < 50 nm). The PIC emulsification method therefore has great potential for forming nanoemulsion-based delivery systems for food, personal care, and pharmaceutical applications.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.592-601
• /
• 2013

This work, which was about the synthesis of 3-(1,8-Naphthalimido) propyl methacrylate and GMA copolymers and their physical properties, investigated the compositions of the copolymer, the reactivity ratios of the monomer, resonance effect(Q), polar effect(e) and fluorescence effect of 1,8-naphthalicanhydride. Azobisisobutyronitronitryl(AIBN) as an initiator was employed at $60^{\circ}C$ with dimethylformamide(DMF) of solvent for the copolymerization of NIPM. $r_1$ was found to be higher than $r_2$ from the reactivity ratios of the monomer obtained from F-R and K-T methods. NIPM was found to be more copolymerized than GMA. The fluorescence spectrums of these polymers showed a weak monomer fluorescence band at 380 nm and a strong excimer fluorescence band at about 460 nm.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.149-149
• /
• 2017

The RING (Really Interesting New Gene) finger proteins are known to play crucial roles in various abiotic stresses in plants. In this study, we report on RING finger E3 ligase, ${\underline{O}ryza}$ ${\underline{s}ativa}$ ${\underline{s}alt$-, ${\underline{A}BA}$- and ${\underline{d}rounght}$ stress-${\underline{i}nduced}$ RING finger ${\underline{p}}rotein{\underline{1}}$ gene (OsSAD1). In vitro ubiquitination assay demonstrated that unlike OsSAD1, a single amino acid substitution ($OsSAD1^{C168A}$) of the RING domain showed no E3 ligase activity, supporting the notion that the activity of most E3s is specified by a RING domain. Result of Yeast-Two hybridization, In vivo protein degradation assay supports that OsSAD1 interacting with 3 substrate, OsSNAC2, OsGRAS44 and OsPIRIN1, and mediates proteolysis of 3 substrates via the 26S proteasome pathway. Subcellular localizations of OsSAD1 while approximately 62% of transient signals were detected in cytosol, 38% of signals were showed nucleus. However, transiently expression of OsSAD1 was detected in cytosol 30% while as 70% of nucleus under 200 mM salt treated rice protoplasts. Results of bimolecular fluorescence complementation (BiFC) showed that two nucleus-localized proteins (OsSNAC2 and OsGRAS44) interacted with OsSAD1 in the both cytosol and nucleus. Heterogeneous overexpression of OsSAD1 Heterogeneous overexpresssion of OsSAD1 in Arabidopsis exhibited sensitive phenotypes with respect to Salt-, mannitol-responsive seed germination, seedling growth. In ABA conditions, OsSAD1 overexpression plants showed highly tolerance phenotypes, such as root length and stomatal closure. Our findings suggest that the OsSAD1 may play a negative regulator in salt stress response by modulating levels of its target proteins.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.1
• /
• pp.54-60
• /
• 2006

In this paper, we describe a bio-fluidic device for adaptive sample pretreatment, in order to optimize the conditions under which absorbance assays can be conducted. This device can be successfully applied to the measurement of Escherichia coli (E. coli) concentrations using adaptive dilution, with which the dilution ratio can be adjusted during the dilution. Although many attempts have been previously made to miniaturize complex biochemical analyses at the chip scale, very few sample pretreatment processes have actually been miniaturized or automated at this point. Due to the lack of currently available on-chip pretreatments, analytical instruments tend to suffer from a limited range of analysis. This occasionally hinders the direct and quantitative analysis of specific analyses obtained from real samples. In order to overcome these issues, we exploit two novel strategies: dilution with a programmable ratio, and to-and-fro mixing. The bio-fluidic device consists of a rectangular chamber constructed of poly(dimethylsiloxane) (PDMS). This chamber has four openings, an inlet, an outlet, an air control, and an air vent. Each of the dilution cycles is comprised of four steps: detection, liquid drain, buffer injection, and to-and-fro mixing. When using adaptive sample pretreatment, the range in which E. coli concentrations can be measured is broadened, to an optical density (O.D.) range of $0.3{\sim}30$. This device may prove useful in the on-line monitoring of cell concentrations, in both fermenter and aqueous environments.