• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.129-138
• /
• 2006

Design securing a dominant position currently in the global market has shown inherent culture of each country, i.d. national disposition. For instancess, there are Scandinavia emphasizing humanism, America adopting pragmatism, Germany reflecting the rational principle, Spain reflecting the daily an, Italian design being rationalism and impressionism. The members of society shall be under the control of the already formed social-cultural value and character. So culture shall restrict the internal manner of social behaviour and apply pressure to the action of main body. Also culture shall be under the control of social environment and each culture shall be materialized as per the disposition of the members of society. Now korean design has been attracted lots of interests and attention from global market because it is excellent in the aspect of application capability for new technology and also suggests the image of design produced through them. Now Korean design shall run side by side the application for formative element to be recognized by technical design as well as korean identity. So dear definition for national and cultural disposition shall be required to korean design education and design development. These prescribed efforts shall be a shortcut for globalization of korean design.

• Journal of Animal Science and Technology
• /
• v.47 no.1
• /
• pp.39-48
• /
• 2005

Outside muscle of pork ham were cut to cube(7 $\times$ 10 $\times$2 ern) and three Korea traditional seasonings such as soybean paste(Tl), garlic paste(T2), red pepper paste(T3) were seasoned by the proportions of meat to seasonings(1 : 1), respectively. The seasoned samples were fermented by fill into plastic box at 0 $\pm$ 1 $^{\circ}C$ for 10 days. And then, the fermented meat from each pack was vacuum-packaged and stored at 0 $\pm$ 1 $^{\circ}C$ for up to 9 weeks. pH and shear force were decreased during storage periods in all treatment groups and WHC was decreased with storage in T2. The saccarinity of T1 was increased and salinity increased during storage in all treatment groups. pH of T2 was increased than that of other treatments, while decreased saccarinity and shear force of in T2. The salinity were higher in the order of T1 > T2 > T3. Volatile basic nitrogen (VBN) value were increased with storage in all treatment groups. Thiobarbituric acid reactive substances (TSARS) value of Tl was increased with storage while it was decreased T2. Thiobarbituric acid reactive substances(TSARS) value was higher in the order of T1 > T3 > T2 at 9weeks of storage. Surface meat L' values of T1 was increased with storage and T3 decreased with storage whereas, surface meat a' values of T1 was decreased with storage, and T2 was increased with storage. Surface meat b' values of T3 was decreased with storage. Escherichia coli were decreased during storage periods in all treatment groups.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.343-347
• /
• 2008

There are two kind of system in hotel for evaluating management. the first is infra system, for example Front management system - reservation system, C/I, C/O system, POS system , web system, call center management -, Back office system, interface system, and so on which manage direct control for hotel, and next is strategic system, for example BSC , CS . which is supporting hotel management. The purpose of this study was to find using the Balanced Scorecard to evaluate hotel management perfomance. Management performance is based on productivity, quality, time, effect, and responsiveness. Hotel economic value is not equal visual asset which is measured financial value. It is include hotel brand, image, customers who have good loyalty, employees who give customers special service, and systems which was affected by internal process. In conclusion, innovation, growth, internal system process, empioyee and customer have effect hotel performance. Therefore hotel has to know non-financial performance which has positively relate to financial performance.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.49-53
• /
• 1969

Some properties of glucose isomerizing enzyme which produced by the strain K-17 in xylose containing nutrient broth medium were investigated. The optimal pH for enzyme reaction was indicated about 7.2 and optimal temperature was about $75^{\circ}C$. The same optimal temprature was indicated by both cell free extract and acetone dried cells using as enzyme. The glucose isomerizing enzyme from strain K-17 was not inhibited by the high concentration of substrate even in a suturated glucose solution, but most enzyme was inactivated by the heat treatment at $80^{\circ}C$. The maximum fructose forming ratio from glucose was about 50 percents.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.55-61
• /
• 1969

This K-17 strain was not absolutely requiring xylose as an inducer for enzyme formations. The most activity of this enzyme was lost when treated at $75^{\circ}C$. for 30 hours but was not influenced at $70^{\circ}C$. for 70 hours of treatment. The activity of this enzyme was increased by the addition of magnesium ions or cobalt ions in the reaction system. In the studies, we found that the magnesium ions simply activate the enzyme reaction and the cobalt ions do not but protect the enzyme from heat inactvation. And it was also found the phosphate buffer solution was very suitable as glucose dissolving solvent on the enzyme reaction. The mixed carbon source medium containing glucose, fructose, sorbitol, xylose and sucrose was more favorable for enzyme production then a sole carbon source containing medium on the shaking culture method.

• Applied Biological Chemistry
• /
• v.51 no.1
• /
• pp.84-87
• /
• 2008

In this research, we screened for glucosyltransferase (GTase) inhibitors that effectively prevent the dental caries from 420 kinds of boiled water extracts of herbs and wild plants and searched for GTase inhibitory activities. Among them, 13 kinds of hot water extracts had high GTase inhibitory activities and especially, we focused on Foeniculum vulgare which showed the highest inhibitory activity on GTase. The boiled water extract of F. vulgare was stable at high temperature and showed as a mixed type of competitive and uncompetitive inhibition kinetic behavior. It did not have antibacterial effect on Streptococcus mutans and had inhibitory activity on GTase. Specially, in the clinical trial, the group treated by boiled water extract of F. vulgare showed more decrease of plague index at 4.8 point than untreated group. These results suggested that boiled water extract of F. vulgare can effectively suppress the plague formation as it inhibits the GTase activity.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.38-53
• /
• 1993

The purpose of this study was to observe the resin infiltration pattern into dentin by various dentin bonding agents. Freshley extracted 36 sound human molars were used in this study. They were stored at $4^{\circ}C$ physiologic saline solution before experiment. All the teeth were cross-sectioned to expose dentin below about 3.0mm at the cusp tip and above 2.0mm at the cemento-enamel junction with Crystal Cutter (MC411 D, Maruto Co., Japan), and were made into specimens for this study (Fig. 1). The specimen experimental groups were divided into 9 groups by dentin surface treatment as following procedures: Group I: Treated with Gluma Cleanser followed by Gluma Primer and Sealer Group 2. Treated with Gluma Cleanser followed by Scotch bond 2 Adhesive Group 3: Treated with Gluma Cleanser followed by Tenure Solution A, Band Visar Seal Group 4: Treated with Scotchprep followed by Scotch bond 2 Adhesive Group 5: Treated with Scotchprep followed by Gluma Primer and Sealer Group 6: Treated with Scotch prep followed by Tenure Solution A, Band Visar Seal Group 7: Treated with Tenure Conditioner followed by Tenure Solution A, Band Visar Seal Group 8: Treated with Tenure Conditioner followed by Scotchbond 2 Adhesive Group 9: Treated with Tenure Conditioner followed by Gluma Primer and Sealer 27 specimens of 36 specimens were divided into 9 groups (Group 1-9), and were used for observation of resin tags. Remaining 9 specimens were divided into 3 groups (Group 1,4 and 7), and were used for observation of fractured dentin surfaces. Specimens to observe the resin tag were demineralized with 20% HCl for 14 hours, specimens to observe the fractured dentin surfaces were demineralized with 10% HCl for 3 minutes. All the specimens were gold-coated with Eiko ion coater (Eiko-engineering Co.), and observed under Scanning electron microscope (Hitachi S-2300) at 20 KV. The following results were obtained: 1. In group 1 treated with Gluma Cleanser, Gluma Primer, and Sealer, most resin tags were more than $100{\mu}m$. 2. In group 4 treated with Scotch prep and Scotchbond 2 Adhesive, most resin tags were about $10{\mu}m$. 3. In group 7 treated with Tenure conditioner, Tenure Solution A, B, and Visar Seal, most resin tags were about $10{\mu}m$ but occasionally resin tags were more than $100{\mu}m$. 4. In groups 2,3,5,6,8 and 9, the lengths of resin tags were inconsistent and the amount of resin tags were reduced.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.52-57
• /
• 1998

The objective of this study was to investigate the effect of cow manure as additive material on the ripening of sewage s sludge for vermistabiJization. The changes of the waste properties by ripening for 50days were observed as a function of the v various mixture ratios of sewage sludge ‘and cow manure. The pH values of the mixture wastes decreased from 7.5-7.67 to 6_ 9~7.2 by the ripening for 50days, and the mixture ratio made dIfferent pH values. The initial value of oxidation-reduction p potential (Eh) of the mixture waste was a negative (-) value indicating an unfavorable condition for earthworm after, but the v values of Eh increased with the opening time. The Increase rate at Eh value was prop$\alpha$rtional to the mixture ratio of cow m manure. The value of alkalinity was also changed into the favorable range for earthworm after 50days except for non-use of 1 the cow manure When the mixture ratio of the cow manure increased from 10% to 30%, the growth of earthworms increased h from 63.7% to 88.3 % tor the survival rate, 265% to 321% for the liveweight increasing rate and 66.7_7% to 91% for hatching f rate of the cocoons. It can be concluded that the proper content of tbe cow manure in the sewage sludge to ensure effective v vermistabilization was over 20%, when the mixture was ripened during 50 days. The quantity of ingestion and 며ectian at 20%-30% was found to be O.15--i.L18g sludge and 0 1l--O.14g solid per capacity earthworm per day, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.545-549
• /
• 2010

Low-frequency noise (1/f noise) has been measured in order to analyze the Vth instability of ZnO TFTs having two different active layer thicknesses of 40 nm and 80 nm. Under electrical stress, it was found that the TFTs with the active layer thickness of 80 nm shows smaller threshold voltage shift (${\Delta}V_{th}$) than those with thickness of 40 nm. However the ${\Delta}V_{th}$ is completely relaxed after the removal of DC stress. In order to investigate the cause of this threshold voltage instability, we accomplished the 1/f noise measurement and found that ZnO TFTs exposed the mobility fluctuation properties, in which the noise level increases as the gate bias rises and the normalized drain current noise level($S_{ID}/{I_D}^2$) of the active layer of thickness 80 nm is smaller than that of active layer thickness of thickness 40 nm. This result means that the 80 nm thickness TFTs have a smaller density of traps. This result correlated with the physical characteristics analysis performmed using XRD, which indicated that the grain size increases when the active layer thickness is made thicker. Consequently, the number of preexisting traps in the device increases with decreasing thickness of the active layer and are related closely to the $V_{th}$ instability under electrical stress.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.165-175
• /
• 2009

With the current move towards adopting mechanistic-empirical concepts in the design of pavement structures, state-of-the-art mechanistic analysis methodologies are needed to determine accurate pavement responses, such as stress, strain, and deformation. Previous laboratory studies of pavement foundation geomaterials, i.e., unbound granular materials used in base/subbase layers and fine-grained soils of a prepared subgrade, have shown that the resilient responses followed by nonlinear, stress-dependent behavior under repeated wheel loading. This nonlinear behavior is commonly characterized by stress-dependent resilient modulus material models that need to be incorporated into finite element (FE) based mechanistic pavement analysis methods to predict more realistically predict pavement responses for a mechanistic pavement analysis. Developed user material subroutine using aforementioned resilient model with nonlinear solution technique and convergence scheme with proven performance were successfully employed in general-purpose FE program, ABAQUS. This numerical analysis was investigated in predicted critical responses and domain selection with specific mesh generation was implemented to evaluate better prediction of pavement responses. Results obtained from both axisymmetric and three-dimensional (3D) nonlinear FE analyses were compared and remarkable findings were described for nonlinear FE analysis. The UMAT subroutine performance was also validated with the instrumented full scale pavement test section study results from the Federal Aviation Administration's National Airport Pavement Test Facility (FAA's NAPTF).