• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.60-60
• /
• 2001

Human thrombopoietin (hTPO) is a cytokine that plays a central role in megakaryopoiesis by influencing on the development and maturation of megakaryocyte and platelet production. To induce hTPO production in the mammary gland, expression vector was constructed by combining the promoter of bovine beta-casein gene, cDNA of hTPO and neomycine resistance gene for transfection into fibroblasts. Bovine fibroblast cells derived from female ear skin were transfercted with the expression vector using Lipofectamine (Life Technology, NY). Transected cells resistant to G4l8 treatment (600 $\mu\textrm{g}$/$m\ell$) were recovered and colony formation was initiated at 13 days. The colonies with about 1 cm diameter were picked and analysed by PCR. Single transfected cells were individually transferred to enucleated oocytes. After electrofusion, the reconstructed embryos were exposed to calcium ionophore (5uM) for 5 min followed by treatment with 6-DMAP (2.5 mM) for 4h. The nuclear transfer embryos were cultured in CRlaa medium at 38.5C, 5% $CO_2$ for 7 days. Twenty three of 29 (79.3%) colonies were proved to be hTPO transfectants by PCR. The colonies were further passaged and used to produce transgenic embryos using nuclear transfer. Cleavage and developmental rates of reconstructed embryos to the blastocyst stage were 65.1% and 39.4%, respectively Of 22 blastocysts that developed from reconstructed embryos with the transfected cell, 20 embryos (90.9%) were positive for hTPO by using PCR analysis. The results suggest that somatic cell nuclear transfer is efficient for production of transgenic embryos.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.2
• /
• pp.140-149
• /
• 1998

The graphitization is affected by the addition of small amount of the elements, such as Si, Al, Ni, B, Cr and Mn etc. Boron is well known as the most effective element for the graphitization of cementite in high carbon steels. But a study on quantitative analysis of B effect on the graphitization is few reported. Therefore the effect of boron addition in Fe-0.65%C-1.0%Si-0.5%Mn steels on the graphitization is investigated quantitatively using hardness tester, optical microscope and scanning electron microscope, neutron induced microscopic radiography. The graphitization in high carbon steels is promoted with 0.003~0.005%B addition. But the graphitization in steels which has no boron takes long holding time at $680{\sim}720^{\circ}C$. The hardness of quenched steel containing 0.003%B is higher than that of 0.005%B added steel due to complete dissolution of fine graphites into the austenite. The 0.003%B added high carbon steel graphitized at $680^{\circ}C$ for 25hr is useful steel for the agricultural implements and automobile parts which needed a good formability and high hardness.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.5
• /
• pp.582-590
• /
• 2005

The application of consomme prepared with different ratios of ground beef and ground chicken to improve taste preferences and the cost of foodstuffs was attempted by reviewing fundamental data and the effect on the sensory and physical characteristics of treatment These treatments were prepared with different ratios(9:1(A), 7:3(B), 5:5(C), 3:7(D), 1:9(E) w/w) of ground beef and ground chicken, respectively. Sensory properties were evaluated in the aspects of both acceptability and intensity. From the acceptability aspect, A treatment showed the highest scores in smell, B in mouthfeel and taste, A and B in color and overall acceptability, respectively. In terms of acceptability, B treatment was favored most for color, mouthfeel, taste and overall acceptability except smell. The more the ground chicken, the higher the intensity aspect E treatment showed higher values than A in all the intensity aspects. Moisture contents and crude proteins increased by increasing the mixed ratio of ground beef, whereas crude ash, solid matter and pH increased by increasing the mixed ratio of ground chicken. Tumidity values were the highest in E treatment, whereas the lowest in A. Tumidity values were increased significantly by increasing the mixed ratio of ground chicken. Viscosity increased by increasing the mixed ratio of ground chicken. The highest viscosity was shown in E treatment The colorimetric lightness values(L) decreased and redness(a), yellowness(b) and total color difference values(AE) increased significantly by increasing the mixed ratio of ground chicken. This experimental study showed that A and B treatment had the highest values in overall acceptability. The results of analysis in crude protein, solid matter, tumidity and viscosity were increased by increasing the mixed ratio of ground chicken. B treatment prepared with a ratio of 7:3 of ground beef and chicken had the most favorable sensory quality. These results suggested the basic information to improve acceptability and to save the costs of Consomme recipes for foodservice institutions.

• Korean Journal of Human Ecology
• /
• v.3 no.2
• /
• pp.77-89
• /
• 2000

In this study, to activate the industrialization and to improve the quality of Toha-jeot by shortening the fermentation period, we investigated the changes in the nutritional components of Toha-jeot. salt-fermented Toha shrimp( Caridina denticulata denticulata $D_{E}$ $H_{AAN}$) which was salted with a low-salt group and high-salt group during fermentation. In this experiment. there are four groups of Toha-jeot which were manufactured with 15% ratio of common salt: the first group containing 2% wheat bran (w2%-L). the second high-salt group containing 2% wheat bran( w2%-H) , the third low-salt group containing 4% wheat bran (w4%-L) and the last high-salt group containing 4% wheat bran(w4%-H). These four groups were refrigerated at 4${\pm}$1$^{\circ}C$ and then taken out for analysis at three month intervals during 9 month. Among the free amino acid contents in Toha-jeot, 22 kinds were detected. 6 month after the fermentation when the quantity of the amino acid contents in Toha-jeot is highest, ornitine, glutamic acid, leucine. alanine. lysine and valine occupy the majority, in the order of abundance. In cases of nucleotides. 6 month after the fermentation. from the groups w2%-L, w2%-H and w4%-L, inosine and IMP were not detected. and hypoxanthine, AMP, ADP were detected but 9 month after the fermentation ADP was not detected. The main constituents of fatty acid were as follows : (a) from w2%-L, w2%-H, 6 month after the fermentation. $C16:0$, $C12:0$, $C18:1$, $C18:3$, and $C16:1$. (b) from w4%-L. 6 month after the fermentation, $C18:3$, $C16:0$, $C12:0$ and $C18:1$. (c) from W4%-H, $C16:0$, $C12:0$, $C18:3$ and $C18:1$. In case of mineral contents. Na, Ca. K. Mg, Fe. Zn, Mn and Cu were detected according to the magnitude of the quantity. From the group w4%-H, high quantity of Na was detected during the total fermentation period. In case of color value, from the groups w2%. the values of L. a. b were highest after 6 month fermentation and were decreased after 9 month fermentation, while from groups w4%, the values of L, a, b were gradually decreased after 3 month fermentation.ion.

• Analytical Science and Technology
• /
• v.37 no.4
• /
• pp.211-219
• /
• 2024

This study presents a sensitive and reliable method for determining tetracycline (TC), oxytetracycline (OTC), and chlortetracycline (CTC) residues in shrimp samples. A two-step process involving liquid-liquid extraction (LLE) followed by solid-phase extraction (SPE) was developed prior to HPLC analysis. The target analytes were effectively extracted using EDTA/McIlvaine buffer (pH 4.0): methanol (80:20, %v/v), with subsequent clean-up using a C18 SPE cartridge. HPLC separation was conducted on a C18 column (250 mm × 4.6 mm i.d., 5 ㎛) at 30 ℃, using 0.01 % trifluoroacetic acid (A) and acetonitrile (B) as the mobile phase. A gradient elution protocol was applied, transitioning from 85(A):15(B) %v/v to 70(A):30(B) %v/v at 7 min, with a 5 min hold, followed by adjustment to 85(A):15(B) %v/v for 13-14 min. The detection was performed using photodiode array (PDA) at 365 nm with a flow rate of 1.0 mL/min. The calibration curves exhibited good linearity within a concentration range of 0.4-6.0 ㎍/mL (R² > 0.995). The limits of detection (LOD) for TC, OTC, and CTC in shrimp were 0.034, 0.029, and 0.021 ㎍/mL, respectively. The limits of quantitation (LOQ) for TC, OTC, and CTC were found to be 0.114, 0.097, and 0.071 ㎍/mL, respectively. Recoveries of TC, OTC, and CTC from spiked shrimp samples ranged from 91.0 % to 95.5 %, 92.4 % to 97.2 %, and 93.3 % to 96.6 %, respectively. This method was successfully applied to the determination of TC, OTC, and CTC residues in shrimp samples sourced from various local markets.

• Journal of Plant Biology
• /
• v.38 no.3
• /
• pp.305-317
• /
• 1995

The bryophyte communities on the forest floor of the mixed coniferous, deciduous broad-leaf forest and the evergreen coniferous forest of cool temperate and subalpine zones in Chiri Mountains with the highest peak (Cheonwangbong 1915 m) in south-central part of the Korean Peninsula were investigated from the phytosociology viewpoint. As a result, five bryophyte communities were recognized, considering the species composition of vascular vegetation; A. Sasamorpha borealis-Abies koreana/Dicranum scoparium-Plagiothecium silvaticum community, B. Bosta minor-Abies koreana/Anomodon rugelii-Plagiomnium cuspidatum community, C. Abies koreana/Hylocomiopsis ovicarpa-Entodon rubicundus community, D. Abies koreana-Picea jezoensis/Hylocomiopsis ovicarpa-Thuidium kanedae community, E. Abies koreana-Pieea jezoensis/Hylocomium splendens-Pleurozium sehreberi community. Among these, the communities A, B, C and D were distributed in the mixed coniferous and deciduous broad-leaf forest of lower altitudes (1200 to 1700 m) and characterized by the elements of the cool temperate zone. They were confimled as synusies belonging to the Fraxino-Abietetum koreanae Song 1988. The community E was distributed in higher altitudes (1700 m to near the summit) and characterized by the species group of the holarctic elements, e.g. Hyloeomium splendens, Pleurozium sehreberi, Dieranum majus, etc. limited in subarctic; subalpine and arctic; alpine zones. The community E was confirmed as a synusie of the Abieti koreanae-Piceetum jezoensis Song 1991 belonging the Vaecinio-Pieeetea Br.-BI. 1939. Up to date many investigator have described the coniferous forest distibuted above 1200 m in Chiri mountauns as the forest vegetation of subalpine zone. However, from the results of the present study, the boundary of the mixed forest and the true subalpine coniferous forest was elucidated to be ca. 1700 m phytosociologically. Species richness was highest in the community E, and the other four communities showed a similar species richness. Among the species diversity indices, H' and D were high in the communities Band E, low in the communities A and C, and medium in the community D. The values of J' decreased with the increase in altitudes and the community E showed the lowest value. The result of Bray-Curtis ordination revealed that the diversity analysis and the division of the above two forest zones are justifiable. The taxa of the bryophyte communities were composed of 25 families, 46 genera, 73 species, 1 subspecies and 2 varieties.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1705-1709
• /
• 2005

The hydraulic LSD which uses the principle of gear pump is packed with viscous oil in tight container. When a slip occurs on one wheel, the hydraulic LSD generates torque caused by high oil pressure in the container. In this study, two dimensional(2-D) side pinion gear model was developed for hydraulic LSD. Using that model the flow analysis was conducted to preestimate pressure distributions of the side pinion gear according to the variations in the design factors such as oil viscosity, gear gap and rpm. Then, applying the obtained pressure distributions on the side pinion gear, finite element analysis was conducted to evaluate the torque characteristics. From the analysis results, the torque characteristics according to the design factor variations were evaluated.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.781-790
• /
• 2012

The HyperGam program was developed for the analysis of complex HPGe ${\gamma}$-ray spectra. The previous version of HyperGam was mainly limited to the analysis of ${\gamma}$-ray peaks and the manual logging of the result. In this study, it is specifically developed into a tool for the isotopic analysis of spectra. The newly developed features include nuclide identification and activity determination. An algorithm for nuclide identification was developed to identify the peaks in the spectrum by considering the yield, efficiency, energy and peak area for the ${\gamma}$-ray lines emitted from the radionuclide. The detailed performance of nuclide identification and activity determination was accessed using the IAEA 2002 set of test spectra. By analyzing the test spectra, the numbers of radionuclides identified truly (true hit), falsely (false hit) or missed (misses) were counted and compared with the results from the IAEA 2002 tests. The determined activities of the radionuclides were also compared for four test spectra of several samples. The result of the performance test is promising in comparison with those of the well-known software packages for ${\gamma}$-ray spectrum analysis.

• Journal of Biosystems Engineering
• /
• v.25 no.2
• /
• pp.97-106
• /
• 2000

To develop the grain moisture meter using microwave free space transmission technique, a 10.5GHz microwave signal with the power of 11mW generated by an oscillar with a dielectric resonator is transmitted to an isolator and radiated from a transmitting $2{\times}2$ microstrip patch array antenna into the sample holder filled with the 12 to 26%w.b. of Korean Hwawung paddy rice. the microwave signal, attenuated through the grain with moisture, is collected by a receiving $2{\times}2$ microstrip patch array antenna and detected using a Shottky diode with excellent high frequency characteristic. A pair of light and simple microstrip patch array antenna for measurement of grain moisture content is designed and implemented on atenflon substrate with trleative dielectric constant of 2.6 and thickness of 0.54 by using Ensemble ver. 4.02 software. The aperture of microstrip patch arrays is 41 mm width and 24mm high. The characteristics of microstrip patch antenna such as grain. return loss, and bandwidth are 11.35dBi, -38dB and 0.35GHz($50^{\circ}$ at far-field pattern of E and H plane. The width of the sample holder is large enough to cover the signal between the antennas temperature and bulk density respectively. The calibration model for measurement of grain moisture content is proposed to reduce the effects of fluectuations in bulk density and temperature which give serious errors for the measurements . From the results of regression analysis using the statistically analysis method, the moisture content of grain samples (MC(%)) is expressed in terms of the output voltage(v), temperature (t), and bulk density of samples(${\rho}b$)as follows ;$$MC(%)\;=\;(-3.9838{\times}10^{-8}{\times}v^{3}+8.023{\times}10^{-6}{\times}v^{2}-0.0011{\times}v-0.0004{\times}t+0.1706){\frac{1}{{\rho}b}}{\times}100$ Its determination coefficient, standard error of prediction(SEP) and bias were found to be 0.9855, 0.479%w.b. and -0.0.369 %w.b. respectively between measured and predicted moisture contents of the grain samples.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.60-69
• /
• 1999

The noise and vibration sources of rotary compressor for room air-conditioner are pressure pulsation of compression process, cavity resonance of inner space, structural radiation noise of shell and impact noise of discharge valve. Among them, pressure pulsation is very important noise and vibration source. Because it transferred various kinds of noise and vibration like as mentioned above. In this reason, muffler and resonator are used in order to absorb and remove these noises. But an analytical prediction using acoustic analysis does not coincident with the experimental result. The difference between analysis and actual state is due to the assumption of analysis. This paper covered with new concept of muffler design based on the turbulence kinetic energy of flow by using CFD. From this analysis, it is possible to decide the best position of discharge port of muffler. Therefore $2{\sim}3dB$ noise reduction effect is acquired in rotary compressor of 5000 BTU grade. Also new approach of resonator design is suggested. From this study, the characteristics of resonator and surge hole (a kind of resonator without pipe length) are identified. The former is useful for pure tone noise (narrow frequency band), and the latter is effective for broad frequency band. This paper shows that it is very available to use 3 dimensional analysis of resonator in order to predict more exact tuning frequency. The result is proved by a lot of experiments. From combination of fluid analysis and acoustic analysis, up stream position is effective location of resonator concerning turbulence motion of fluid.