• 소성∙가공
• /
• 제19권8호
• /
• pp.508-516
• /
• 2010

Thickening process in sheet metal forming is being increased to improve the strength as well as to reduce manufacturing process such as welding. This process can make it possible to obtain part locally thicker than that of initial sheet thickness. In this study, design method for manufacturing the component which has double sinks with local thickened wall is proposed. Deep drawing and upsetting processes are applied in order to form double sinks and thicken its walls. Used material is SPHC440 with the thickness of 2.0mm and initial blank size is determined on the basis of the final product. Distance between the center of double sinks and first drawing ratio to avoid fracture are the most significant factors during deep drawing. FE-analysis is implemented in order to determine the appropriate values. Progressive die is designed based on the proposed method and FE-analysis. As a result of experiment, locally thickened component can be manufactured, which has double sinks with the thickness about 3mm at the corner and wall.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2006

The hydroformability of aluminum alloy sheets at elevated temperatures have been investigated in this study. It is necessary to analyze the variations of the mechanical properties that depend on the forming temperature and the heat conduction during warm hydroforming. Therefore, in this study a coupled simulation of plastic deformation and temperature distribution in the warm hydroforming process is performed and compared with experimental data. The multi-purpose code DEFORM-2D can handle this type of calculations but it takes high computation time if contact heat transfer between die, tube and pressure medium occurs. Experiments were conducted by high temperature tribometer(pin-on-disk) allowing measuring the friction coefficients of the aluminum alloys at several temperatures and these results are applied to the coupled simulation by which the optimal process parameters such as internal pressure and preset temperature on hydroformability can be determined. The comparison of the FE analysis with the experimental results has shown that hydroformability given by bulge height, and temperature distribution of the tube specimen make a little difference with the FE results but the trend predicted by simulation agrees well with experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.778-782
• /
• 2000

Deep drawing and ironing are the major process used today in manufacturing of battery case used in cellular phone and IMT-2000 from aluminum. The same technology is utilized in manufacturing of steel or aluminum rectangular cans for components of medical instrument, portable PC, walkman and so on. Most of these processes require multi-stage ironing following the deep drawing and redrawing processes. The practical aspects of this technology are well known and gained through extensive experiment and production know-how. However, the fundamental aspects of theses processes are relatively less known. Thus, it is expected that process simulations using FEM techniques would provide additional detailed information that could be utilized to improve the process condition. This paper illustrates the application of process modeling to deep drawing and redrawing operations with the cellular phone and IMT-2000. A commercially avaliable finite element code LS-DYNA3D was used to simulate deep drawing and redrawing operations.

• 한국통신학회논문지
• /
• 제8권2호
• /
• pp.76-81
• /
• 1983

PCM符號가 NRZ-L인 binary data를 5次 Bessel low-pass filter를 通하여 傳送하는 telemetry systemn에 對하여 FM方式으로 RF link를 構成하고 liniter-discriminator로 複調하였을 경우에 digital通信system의 性能評價에 重要한 bit誤差確率을 SNR에 對하여 解析的으로 檢討하였다. 實際로 設計에 적용한 telemetry system에서 bit rate를 140kHz, 變調前 filter의 f를 100kHz, 送信機의 最大周波數編移 2f를 300kHz로 設計하였을 때 f0T=0.7 및 h=2ft=2이며 SNR이 10dB일 때 bit誤差確率은 10으로 計算되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.95-98
• /
• 1996

Response speed of generator/control system kas increased with the aid of the development of power electronics. Even though it is desirable to enhance response speed for the control system(AVR/Gov) of generator itself, in case a certain generator/control system with high response excitation system is connected with bulk power system, terminal voltage and active power of some generators can oscillate with adjoining generators or near area when even a little of disturbance take place. PSS(Power System Stabilizer) is used to damp rotor swing by adding the supplementary signal in phase with speed. As the stable AVR response is very important before PSS is installed, modeling and analysis of generator/control system was performed. Next we have analysed PSS response of Hanlim's gas turbine by transmission line open/close test.

• Nuclear Engineering and Technology
• /
• 제36권5호
• /
• pp.388-402
• /
• 2004

A phenomena identification and ranking table(PIRT) was developed for a main steam line break (MSLB) event for the Advanced Power Reactor-1400 (APR-1400). The selectee event was a double-ended steam line break at full power, with the reactor coolant pump running. The developmental panel selected the fuel performance as the primary safety criterion during the ranking process. The plant design data, the results of the APR-1400 safety analysis, and the results of an additional best-estimate analysis by the MARS computer code were used in the development of the PIRT. The period of the transient was composed of three phases: pre-trip, rapid cool-down, and safety injection. Based on the relative importance to the primary evaluation criterion, the ranking of each system, component, and phenomenon/process was performed for each time phase. Finally, the knowledge-level for each important process for certain components was ranked in terms of existing knowledge. The PIRT can be used as a guide for planning cost-effective experimental programs and for code development efforts, especially for the quantification of those processes and/or phenomena that are highly important, but not well understood.

• 대한치과기공학회지
• /
• 제45권1호
• /
• pp.1-7
• /
• 2023

Purpose: To evaluate the marginal and internal fit of metal coping fabricated by a metal three-dimensional (3D) printer that uses selective laser melting (SLM). Methods: An extraoral scanner was used to scan a die of the prepared maxillary right first molar, and the coping was designed using computer-aided design software and saved as an stereo lithography (STL) file. Ten specimens were printed with an SLM-type metal 3D printer (SLM group), and 10 more specimens were fabricated by casting the castable patterns output generated by a digital light processing-type resin 3D printer (casting the 3D printed resin patterns [CRP] group). The fit was measured using the silicon replica technique, and 8 points (A to H) were set per specimen to measure the marginal (points A, H) and internal (points B~G) gaps. The differences among the groups were compared using the Mann-Whitney U-test (α=0.05). Results: The mean of marginal fit in the SLM group was 69.67±18.04 ㎛, while in the CRP group was 117.10±41.95 ㎛. The internal fit of the SLM group was 95.18±41.20 ㎛, and that of the CRP group was 86.35±32 ㎛. As a result of statistical analysis, there was a significant difference in marginal fit between the SLM and CRP groups (p<0.05); however, there was no significant difference in internal fit between the SLM group and the CRP group (p>0.05). Conclusion: The marginal and internal fit of SLM is within the clinically acceptable range, and it seems to be applicable in terms of fit.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.33-38
• /
• 2007

Recent, The propeller had high performance according as high performance of small ship. So, We has the development for azimuth thrusters. This Paper has structure improvement of steering support flange in azimuth thrusters. Steering support flange is very important part. because, Steering support flange supports all weight of azimuth thrusters. We has static & dynamic analysis of Steering support flange, and we discover the very safety. So, We has optimum design for the cost reduction. The first method of optimum design, We has the thickness reduce to 30mm from 5mm. Next method of optimum design, We had added stiffener. And we has the structure & dynamic behavior analysis. We had to dynamic behavior analysis. The first, We had to modal analysis. The result of 1st-modal analysis is that original model had to 76.48hz and new model had to 200.9hz. The second, We had to harmonic analysis. The result, We gave the thrust power to steering support flange. and We had to frequency analysis to $0{\sim}500hz$. The result, Deflection ration reduce to 16.64.

• 한국미생물·생명공학회지
• /
• 제44권4호
• /
• pp.470-478
• /
• 2016

지렁이의 장내로부터 분리한 미생물 중에서 키틴 가수분해 활성이 우수한 미생물을 선발하였으며, 이를 동정하여 Bacillus licheniformis GA9으로 명명하였다. B. licheniformis GA9이 생산하는 키틴 분해효소의 정제는 배양상등액 40-60% 황산암모늄 침전, 음이온교환 크로마토그래피, 겔 크로마토그래피를 사용하여 정제하였다. 최종적으로 정제한 키틴 분해효소는 45.2배로 정제되었고 효소단백질 회수율은 20.0%를 나타내었다. 정제한 키틴 분해효소의 분자량은 약 52.1 kDa으로 나타났으며, N-terminal amino acid sequencing 분석결과, 아미노산 서열은 D-S-G-K-N-G-K-I-I-R-Y-Y-P-IR로 확인되었다. 키틴 분해효소의 최적반응 pH와 pH 안정성을 측정한 결과, pH 5.0에서 최대 활성을 나타내었으며 pH 5.0-6.0에서 안정성을 나타내었다. 키틴 분해효소의 최적반응 온도와 온도안정성의 경우, $40^{\circ}C$에서 최대 활성을 나타내었으며, $60^{\circ}C$까지 60%의 잔존 활성을 나타내었다. 정제한 키틴 분해효소는 10 mM $Co^{2+}$ 금속이온에 의해 효소활성이 증가하였으며, $Fe^{2+}$과 $Cu^{2+}$ 금속이온에 의해 효소활성이 감소하였으나, EDTA 첨가시 감소한 효소활성이 일부 회복되었다. 정제한 효소의 $K_m$ 및 $V_{max}$는 각각 4.02 mg/ml와 0.52 mg/min이었다. 또한 키틴 분해효소는 생명공학, 생물의약, 농업, 식품영양 등 다양한 산업분야에서 응용이 가능하다.

• Journal of Animal Science and Technology
• /
• 제44권1호
• /
• pp.23-30
• /
• 2002

칡소와 비경흑색 한우의 MC1R 유전자의 유전자형를 조사하고 칡소의 모색 발현과 한우 비경색과의 관계를 규명하기 위하여 MC1R 유전자의 PCR-RFLP 분석을 수행하였다. 소에서 나타나는 6가지 유전자형($E^D/E^D,\;E^D/E^+,\;E^D/e,\;E^+/E^+,\;E^+$/e와 e/e) 중 칡소에서는 단지 2개의 유전자형 $E^+/E^+$와 $E^+$/e 만이 출현하였고, e/e 유전자형을 가지는 개체는 전혀 출현하지 않아 제주재래흑우에서와 같이 흑색 호반모가 발현되기 위해서는 기본적으로 $E^+$ allele이 필요한 것으로 사료되었다. 비경흑색 한우와 비경황색 한우에서는 모두 $E^+$/e 혹은 e/e 유전자형이 출현하였고 $E^+$와 e allele의 빈도는 각각 0.37, 0.63과 0.11, 0.89였다. 비록 $E^+$ allele의 빈도가 비경흑색 한우에서 비경황색 한우에서 보다 높았지만, $E^+$ allele과 비경 흑색과는 완전한 연관성은 없었다. 이러한 결과는 MC1R 유전자 분석이 칡소 뿐만 아니라 한우의 모색 고정에도 유용한 도구로 이용 가능함을 제시하고 있다.