• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1056-1059
• /
• 1997

Thyristor-Controlled Series Compensation (TCSC) is expected to be applied in transmission systems to achieve a number of benefits. TCSC can provide such assistance for stability, as well as helping to direct flows onto desired transmission paths. This paper describess a TCSC model which can be used for typical transient and oscillatory stability studies. Also included is a discussion on relevant information to extend the modeling detail of the TCSC for use stability analysis.

• Transactions of Materials Processing
• /
• v.25 no.5
• /
• pp.295-300
• /
• 2016

Recently, Ultra High Strength Steel (UHSS) sheet metal has been widely used to improve lightweight structures in the automobile industry. Because UHSS sheets have high strength but low elongation, it is difficult to control winkle and thinning for complex shaped products. The draw beads on die surface were introduced in this study to reduce wrinkle and thinning. The positions and strength values of draw beads were selected as design variables and optimized using finite element analysis. The beads positions and strength of a mold for B-pillar part were designed with the proposed optimization method. The accuracy of die design from optimization was verified by comparing with the results from 3-D scanned geometry.

• Proceedings of the KIEE Conference
• /
• 2005.07e
• /
• pp.103-105
• /
• 2005

The test were performed to analyze the cause of endwinding breakdown of hydro-generator which had been in service after being constructed 1971. we conducted insulation diagnostic tests and checked visual inspection and operating condition of protective relays. On the basis of these test results, this paper tried to present the importance of service environment for the generator stator winding.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.247-249
• /
• 2003

This paper presents the analysis of the transient temperature rise at the surface of underground power cables and an estimation of conductor temperature considering the power load change of underground power cables.

• Structural Engineering and Mechanics
• /
• v.33 no.6
• /
• pp.657-674
• /
• 2009

In this paper a 3-D continuum damage mechanics formulation for composite laminates and its implementation into a finite element model that is based on the layer-wise laminate plate theory are described. In the damage formulation, each composite ply is treated as a homogeneous orthotropic material exhibiting orthotropic damage in the form of distributed microscopic cracks that are normal to the three principal material directions. The progressive damage of different angle ply composite laminates under quasi-static loading that exhibit the free edge effects are investigated. The effects of various numerical modeling parameters on the progressive damage response are investigated. It will be shown that the dominant damage mechanism in the lay-ups of [+30/-30]s and [+45/-45]s is matrix cracking. However, the lay-up of [+15/-15] may be delaminated in the vicinity of the edges and at $+{\theta}/-{\theta}$ layers interfaces.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.33-33
• /
• 1999

The design of a vacuum pumping system for the KOMAC (Korea Multipurpose Accelerator Complex) RFQ(Radio-Frequency Quadrupole) linac is described. [Fig] Resulted from the lost proton beam, gas streaming from the LEBT (Low Energy Beam Transport) and out-gassing from the surfaces of the RFQ cavity and vacuum plumbing, the total gas load will be on the order of 7.2$\times$10-4 Torr-liters/sec, consisting mainly of hydrogen. The system designed to pump on a continual basis with redundancy to ensure that the minimal operating vacuum level of 1.0$\times$10-6 Torr is maintained even under abnormal conditions. Details of the design, performance analysis and the preliminary test results of the cryogenic pumps are presented.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.520-525
• /
• 2003

A numerical investigation was performed to determine the effect of airfoil on the optimum flap height using NACA0015 Wells turbine. The five double flaps which have 0.5% chord height difference were selected. A Wavier-Stokes code, CFX-TASCflow, was used to calculate the flow field of the Wells turbine. The basic feature of the Wells turbine is that even though the cyclic airflow produces oscillating axial forces on the airfoil blades, the tangential force on the rotor is always in the same direction. Geometry used to define the 3-D numerical grid is based upon that of an experimental test rig. This paper tries to analyze the optimum double flap of Wells turbine with the numerical analysis.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.14-17
• /
• 2001

In this paper, the vibration characteristics of a 2-phase Hybrid type Linear Stepping Motor(HLSM) are analyzed using the ACSL. A magnetic equivalent circuit is based on the structure of the HLSM, and then the electric equivalent circuit of the HLSM is derived by solving equations for the magnetic equivalent circuit. A normal force is calculated using FEM(Flux2D). And the vibration characteristics of the HLSM are simulated by the ACSL with the voltage equations, the thrust equation, the normal force equation and the kinetic equation.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.244-245
• /
• 2012

본 논문에서는 이산 웨이블릿 변환(DWT;discrete wavelet transform)의 다해상도 분석(MRA;multi-resolution analysis)을 통해 분해된 배터리의 저주파 전압 성분(approximation;$A_n$) 기반 SOC(State-of-charge) 추정방법을 소개한다. 급격한 전압 변화의 특성을 나타내는 고주파 전압 성분(detail;$D_n$)이 제거되고 저주파 전압 성분만이 SOC 추정을 위해 사용된다. 이 경우 기존 확장 칼만필터(EKF;extended Kalman filter)에서 SOC 추정에러를 개선하기 위해 사용되었던 노이즈 모델의 생략이 가능하여 알고리즘의 복잡성이 개선된다. 개선된 확장 칼만필터 기반 SOC 추정 결과를 통해 제안된 방법을 검증하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.393-396
• /
• 2005

This paper is concerned with the drawing process of $Al-1\%Si$ bonding wire. In this study, the finite-element model established in previous work was used to analyze the effect of various forming parameters, which included the reduction in area, the semi-die angle, the aspect ratio, the inter-particle spacing and orientation angle of the fine Si particle in drawing processes. The finite-element results gave the consolidation condition. From the results of analysis, the effects of each forming parameter were determined. It is possible to obtain the Important basic data which can be guaranteed in the fracture prevention of $Al-1\%Si$ wire by using FE-Simulation.