• 한국축산식품학회지
• /
• 제36권3호
• /
• pp.300-308
• /
• 2016

In this study, the effects of grape seed flour on the physical-chemical properties, microbiological and sensory properties of Turkish dry fermented sausage, sucuk, was investigated. After the sausages produced with beef, beef fat, sheep tail fat and spices, they were ripened for 14 d. Then they were vacuum-packaged and stored for 80 d at 4℃. The effects of grape seed flour (GSF; 0%, 0.75%, 1.5%, 3%) on the physical-chemical properties (pH, moisture, fat, protein, free fatty acids, thiobarbituric acids, diameter reduction, ripening yield, instrumental colour), microbiological properties (total aerobic mesophilic and lactic acid bacteria, Enterobacteriaceae, mould and yeast) and sensory properties of the sausages were investigated. Grape seed flour decreased moisture, TBA, diameter reduction, instrumental colour (a, b) values and sensory analysis scores during the ripening period; it also decreased TBA, instrumental colour (L, a, b) values, total aerobic mesophilic and lactic acid bacteria counts during the storage period. It was concluded that grape seed flour has a potential application as an additive in dry fermented sausages.

• 동력기계공학회지
• /
• 제7권2호
• /
• pp.29-35
• /
• 2003

The monitoring and diagnostics of the rotating machinery have been received considerable attention for many years. The objectives are to classify the machinery condition and to find out the cause of abnormal condition. This paper describes a classification method of diagnosing the small reciprocating compressor for refrigerators using the artificial neural network and the wavelet transform. In order to extract salient features, the wavelet transform are used from primary noise signals. Since the wavelet transform decomposes raw time-waveform signals into two respective parts in the time space and frequency domain, more and better features can be obtained easier than time-waveform analysis. In the training phase for classification, self-organizing feature map(SOFM) and learning vector quantization(LVQ) are applied, and the accuracies of them ate compared with each other. This paper is focused on the development of an advanced signal classifier to automatize the vibration signal pattern recognition. This method is verified by small reciprocating compressors, for refrigerator and normal and abnormal conditions are classified with high flexibility and reliability.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.477-485
• /
• 2009

The study of nitrogen dilution effect on the flame stability was experimentally investigated in a non-premixed turbulent lifted hydrogen jet with coaxial air. Hydrogen gas was used as a fuel and coaxial air was used to make flame liftoff. Each of hydrogen and air were injected through axisymetric inner and outer nozzles ($d_F=3.65\;mm$ and $d_A=14.1\;mm$). And both fuel jet and coaxial air velocity were fixed as $u_F=200\;m/s$ and $u_A=16\;m/s$, while the mole fraction of nitrogen diluents gas was varied from 0.0 to 0.2 with 0.1 step. For the analysis of flame structure and the flame stabilization mechanism, the simultaneous measurement of PIV/OH PLIF laser diagnostics had been performed. The stabilization point was selected in the most upstream region of the flame base and defined as the point where the turbulent flame propagation velocity was equal to the axial component of local flow velocity. We found that the turbulent flame propagation velocity increased with the decrease of nitrogen mole fraction. We concluded that the turbulent flame propagation velocity was expressed as a function of turbulent intensity and axial strain rate, even though nitrogen diluents mole fraction was changed.

• 한국결정학회지
• /
• 제7권1호
• /
• pp.20-29
• /
• 1996

(Sr1-xCax)CuO2 단결정을 융제법으로 제조하고 단결정 X-선 회절법을 이용하여 그 결정구조를 밝혔다. 이 화합물의 결정축계는 사방정계(orthorhombic system)이며, 공간군은 Cmcm(63), 그리고 격자상수 a, b, c는 각각 3.4645Å, 16.1417Å, 3.8727Å이었다. (Sr1-xCax)CuO2 화합물에서 Sr대신 치환되는 Ca이온의 한계를 구조적인 관점에서 연구하였다. 이를 위해 X-선 회절(CAD4), energy dispersive X-ray fluorescence (EDAX) and electron probe micro-analysis (EPMA) 등을 사용하였다. Ca가 치환됨에 따른 Cu-O 결합길이의 변화로부터 Ca의 치환한계를 결정하였는데 그 한계치는 Xca≒0.73이었다.

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.353-366
• /
• 2023

This paper presents a finite-element analysis (FEA) of aluminum alloy rectangular hollow sections (RHSs) and square hollow sections (SHSs) with circular through-openings under three-point and four-point bending. First, a finite-element model (FEM) was developed and validated against the corresponding test results available in the literature. Next, using the validated FE models, a parametric study comprising 180 FE models was conducted. The cross-section width-to-thickness ratio (b/t) ranged from 2 to 5, the hole size ratio (d/h) ranged from 0.2 to 0.8 and the quantity of holes (n) ranged from 2 to 6, respectively. Third, results obtained from laboratory test and FEA were compared with current design strengths calculated in accordance with the North American Specifications (NAS), the modified direct strength method (DSM) and the modified Continuous strength method (CSM). The comparison shows that the modified CSM are conservative by 15% on average for aluminum alloy RHSs and SHSs with circular through-openings subject to bending. Finally, a new design equation is proposed based on the modified CSM after being validated with results obtained from laboratory test and FEA. The proposed design equation can provide accurate predictions of flexural capacities for aluminum alloy RHSs and SHSs with circular through-openings.

• 대한임상검사과학회지
• /
• 제36권1호
• /
• pp.19-26
• /
• 2004

According to increase of domestic blood components use, the quality control of blood components is necessary to support good products. The purpose of this study is used to provide the producing index of the good product as compared with the accuracy and validity for the distribution of the quality control data. The value of mean, standard deviation, 95% confidence interval and degree of normal distribution of data were calculated by univariate procedure, the value of monthly mean of each blood centers per items were compared by Analysis of Variance(ANOVA) test for the degree of distribution. When there was difference among the mean values, the Duncan's multiple range test was done to confirm the difference. Finally, methods for accessing accuracy and validity of the quality data was done by the Contingency table test. The quality data of five blood centers was showed to the normal distribution and it was in a acceptable range. For each blood centers, the monthly means of Hematocrit(Hct), Platelet(PLT) and pH were not significantly different except Hct of C center, PLT of B, D center and pH of A center. The quality data per items was graded according to quality to six level. As a result of the comparative analysis, the monthly means of Hct of C and E center was significantly different higher than that of D, B and A center. The monthly means of PLT of A center and pH of C center was significantly different higher than that of the others. In the accuracy and validity of the quality control data, C center for Hct, A center for PLT and C center for pH were better than the other. The C blood center was most satisfiable and stable in the quality control for blood component. If the quality control method used in C blood center is adopted in other blood centers, the prepared level of the blood component of the center will be improved partly.

• 한국가금학회지
• /
• 제32권4호
• /
• pp.239-244
• /
• 2005

Uncoupling protein(UCP)은 갈색 지방세포에서 특이적으로 발현하고 있으며 복잡한 세포의 열 생산 작용에 관여한다고 알려져 있다. 본 연구는 한국 재래 닭 집단의 UCP 유전자 내에 존재하는 SNP를 검출하였다. 한국 재래 닭 집단의 UCP유전자 exon 3지역의 염기서열 분석 결과 1316 bp에서 T염기가 C염기로 치환되어짐을 확인하였다. T+11316C 지역의 PCR-RFLP 분석을 위해 제한효소 Afl III를 사용하였다. 한국 재래닭 집단내 유전자형 빈도는 TT가 0.7875, TC가 0.1875 그리고 CC가 0.025로 검출되었으며 대립유전자의 빈도는 T가 0.881 그리고 C가 0.119로 나타났다. 또한 검출된 SNP가 경제형질에 미치는 영향을 분석한 결과 한국 재래 닭 집단의 T/T 유전자형과 C/C유전자형에서 일당 산란율에서 통계적으로 유의한 차이가 있음을 확인하였다. 본 연구의 결과는 향후 더 많은 UCP 유전자와 관련된 연구와 한국 재래 닭의 육종 전략에 도움이 될 것으로 사료된다.

• 대한화학회지
• /
• 제27권4호
• /
• pp.244-254
• /
• 1983

최적 조건에서 티오황산나트륨$(Na_2S_2O_3) 포와 수용액으로부터 단결정을 생성시킨다. 이 단결정에 약 $20{\times}10^6$ 렌트겐의 ${\gamma}$-선을 조사시키면 그 결정 내부에 상자성 중심 또는 상자성 결함들이 생성되어 진다. g값이 2.0036인 등방성 D.P.P.H 피크를 기준으로 하여 무등방성인 각 상자성종들의 스펙트럼을 상온에서 X-band 전자 스핀 공명 분석기로 얻었다. 무등방성 피이크들의 각도의존성을 나타내기 위하여 서로 직교하는 a, b, c 결정축으로 $0^{\circ}$에서 $180^{\circ}$까지 $10^{\circ}$간격으로 회전시키면서 ESR 스펙트럼을 기록하였다. 무등방성 피이크들과 등방성 D.P.P.H 피이크간의 선위치 거리로부터 g값들을 계산하고 각 상자성종들의 g값의 9 matrix 원소들을 얻어 대각화(diagonalization)시켜 특성 주 g 값(principal g values)과 방향여현(direction cosine)을 얻었다. 이 특성 주 g값과 방향여현으로 ${\gamma}$-선에 조사된 $Na_2S_2O_3$ 단결정내의 상자성 결함을 분석한 결과 이 단결정내에 무등방성 피이크에 해당하는 $SO_2^+, SO_2^- $및 미확인된 불안정한 상자성 중심 등이 존재함을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.628-632
• /
• 2007

The purpose of study is to confirm a acceptable range of data errors in data collecting. To examine a acceptable range of data errors, emission level is calculated for a vehicle flow and heavy vehicle percentage as a function of small-sized velocity. According to road selected, noise level of detail influence road noise calculations. It can be concluded that a vehicle flow raised an error less than 5000(veh/h) for a maximum error in emission level of 3.01dB, and the more a heavy vehicle percentage have a low value, the more emission level is a slight difference. This analysis gives insight regarding the accuracy of traffic flow data that is needed to reach a certain level of accuracy for the resulting noise level.

• 소성∙가공
• /
• 제16권8호
• /
• pp.582-589
• /
• 2007

This paper is related to an analysis on the surface expansion in backward can extrusion process using spherical punches. It is generally known that the backward can extrusion process usually experiences severe normal pressure and heavy surface expansion. This is a reason why the backward can extrusion process is one of most difficult operations among many forging processes. Different punch nose radii have been applied to the simulation to investigate the effect of punch nose radius on the surface expansion, which is a major effort in this study. AA 2024 aluminum alloy is selected as a model material for investigation. Different frictional conditions have also been selected as a process parameter. The pressure applied on the punch has been also investigated since heavy surface expansion as well as high normal pressure on the tool usually leads to severe tribological conditions along the interface between material and tool. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including strain distributions and maximum pressure exerted on the workpiece and punch, the effect of punch nose radius and the frictional condition on the surface expansion and the location and magnitude of maximum pressure exerted, respectively.