• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.1
• /
• pp.10-16
• /
• 2004

The failures such as leakage and burst stemmed from the repetitive motions of bending and stretching of the assembly of hydraulic hose in construction machines, agriculture machines, vehicles, and industrial heavy machines can induce big troubles. Therefore, the hydraulic hose itself eventually requires an estimation of life to operate the hydraulic system safely. In this research, we have qualitatively selected the efficient test items by the analysis of the life and potential failures of hydraulic hose. We have used more than seven of hydraulic hoses simultaneously for the research. We have applied impulse pressure and half omega flexing motions to the accelerated life testing Test results have been expressed by employing weibull plot.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.436-439
• /
• 2005

Condenser tube has been used as a component of heat exchanger in automobile and air conditioning apparatus. In this paper, porthole die extrusion that is advantageous to form long hollow section tube is analyzed by direct extrusion of condenser tube with 12 holes. A study on extrusion process is performed through the 3D FE simulation at non-steady state and extrusion experiments. Especially, weldability, extrusion load and die defects were estimated try FE-simulation. This study present the redesigned die of direct extrusion in consideration of the results obtained from FE-analysis.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.41-43
• /
• 2001

This paper presents a Web-based educational tool for Power System Engineering, especially for power engineers. This tool has Web-oriented educational courses for power system education. The Web-based learning has become more popular year by year in the various fields[1-2]. The proposed educational tool provides some courses such as power system introduction Course, KEPCO's system introduction Course, Power system devices Course, Power Flow Course, OPF Course, ELD Course, Stability Analysis Course, Fault analysis Course, Voltage & Frequency control Course, and power system planning & operation Course. Finally, it will be scheduled to install for the education tool of the power system engineering for KEPS[3].

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1656-1658
• /
• 1998

This paper deals with a measurement system of a distance between lightning strokes and observatory station and spectrum analysis of electric fields radiated from lightning discharges. The distance measurement system, which consists of a loop type magnetic field sensor, a microphone and one chip microprocessor, is connected to a personal computer through RS232 port to acquire and process the data. This system is to use a difference of propagation velocity between an electromagnetic wave and a sonic wave produced by lightning discharge. Also, an electric field waveform and a frequency spectrum were investigated by an electric field measurement system with a hemisphere antenna and a spectrum analyzer with a biconical antenna and a log-periodic antenna, respectively. The results would be used as a basic reference to protect the power systems and electric circuits from lightning overvoltages.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.594-596
• /
• 1995

This paper represents an accurate evaluation method in the eigenvalue analysis of the synchronous machine which has the characteristics of seperated saturation and cross-magnetized one. The cross-magnetizing effect is included in the reactance and state matrix of the machine. And the machine with excitation system is simulated in the cases of those two saturations. The simulation results show the existence of the differences between the seperated saturation and the cross-magnetized one in the analysis of power system.

• Transactions of Materials Processing
• /
• v.21 no.1
• /
• pp.42-48
• /
• 2012

Hydroforming has attracted the attention of manufacturing industries for vehicles and transportation systems. A wide range of products such as subframes, camshafts, radiator frames, axles and crankshafts are made by the hydroforming process. Hydroformed parts often need to be structurally joined to other components during assembly. Therefore it is useful if the hydroformed automotive parts can be attached with a localized flange. In this study, a hydroforming process to produce a rectangular shape flange is proposed. FE analysis to form the flanged rectangular shape was performed by Dynaform 5.5. The hydroforming characteristics at various die aspect ratios and feeding conditions were analyzed and optimal process conditions which can avoid defects are suggested. For validation purposes, hydroforming experiments to form the flange were conducted with the optimized conditions. The results show that the flanged parts can be successfully formed with a hydroforming process without additional processing steps.

• Journal of Sensor Science and Technology
• /
• v.10 no.6
• /
• pp.317-327
• /
• 2001

In this paper, we proposed a new detection method of pH image to effectively measure a 2-dimensional pH distribution of test materials by irradiating an frequency modulated light to LAPS using a reticle. It could measure simultaneously signals in one line by applying a modulated light having difference frequency for each pixel using a frequency modulating reticle, and calculating an amplitude with respect to a frequency component by the light source. To experiment the proposed method, we designed and implemented a reticle considering of a LAPS's characteristic, and reconstructed an image by frequency analysis using the implemented reticle and test pattern image. As a result, we verified that the proposed method using the reticle was able to detect 30 times faster for a $30{\times}30$ pixels pH image having a PSNR of 22-24 [dB] than conventional method.

• Journal of Animal Environmental Science
• /
• v.14 no.1
• /
• pp.39-46
• /
• 2008

Experiments were carried out to evaluate the air speed distribution of an enclosed growing-finishing pig house in summer and winter. The data taken by experiments were compared to validate with the calculated air speeds by a commercial CFD code, FLUENT. Air basically enters into the house through Baffled slot Inlet and leaves through a exhaust fan attached on the Exhaust fan in exiting wall of the house. Air speeds were measured as $2{\sim}2.5m/s$ at the two side slot in winter and 0.8 m/s in summer. The validation showed that a CFD simulation is one of feasible methods to predict airspeed distribution in the growing-finishing pig house.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.729-734
• /
• 2004

This study was performed to analyze the sequence variations of mtDNA D-loop and their effects on milk in Hanwoo(Korean cattle). The resulting sequences were compared with previously published sequences for other cattle breeds (GenBank JOI394). The Polymerase Chain Reaction was performed to amplify a total of 964 bp between nucleotide 15758 and 383 within D-loop region of mtDNA using specific primers. Twenty polymorphic sites by nucleotide substitution were found in mtDNA D-loop region of Hanwoo. The frequencies of positions at 8, 169, 16042, 16051, 16057, 16093, 16119, 16122, 16209, 16255 and 16302 nt with high levels of sequence polymorphism were 0.150, 0.950, 0.085, 0.138, 0.106, 0.085, 0.138, 0.212, 0.085, 0.148 and 0.180, respectively. The substitution effect at 16119(p<0.1) and 16185(p< 0.05) nt was found significant on milk production. Polymorphism of mtDNA sequence in D-Ioop region could be useful for the analysis of cytoplasmic genetic variation and associations with the other economically important traits and maternal lineage analysis in Hanwoo.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.9-21
• /
• 1983

The structures of oak stands were studied in relation to their productivity. Three plots classified by the site quality following to altitude, were selected on the oak stand located at Naryongri Eunsanmyun Buyeogun. The site qualities of the stand studied were generally estimated to be moderate in respect to some soil physical and chemical properties. Quercus variabilis was dominant species in the vegetation composition of the stand studied. The crown densities of the stand were varied from 65.4% in plot I to 78.2% in plot III and the parts, occupied with oak trees, ranged from 44.4% in plot I to 65.9% in plot III in the density. In the contrast to crown density, the growing stocks of oak trees ranged from $3.937m^3$ in plot I (73.4% of plot total) to $2.075m^3$ in plot III (84.3% of plot total). The occupied ratios, measured by crown class, exhibited dissimilarity between crown projection area and volume, and also the ratios brought into different patterns by plot. Highly significant correlations were proved between crown projection areas and volumes of individual oak trees by plot, but not proved in the relations by crown class. The cumulative growth, current annual increment and mean annual increment displayed various patterns by plot and by crown class in the heights, D. B. H. s and volumes of oak trees. The maximum values of current annual increment of height were generally recorded in 10 to 20 years, earlier than those of D. B. H. The mean annual increment of height, D. B. H. and volume maintained similar levels after about 10 years and fluctuated irregularly. The crown projection area and volume following to thinning decreased in the order of the thinning methods of grade A < grade B < crown thinning$90m^3/ha$ in about 40 years in the productivity of volume of the oak stand studied.