• 제목/요약/키워드: D-cover

검색결과 659건 처리시간 0.023초

THE COMPETITION NUMBERS OF HAMMING GRAPHS WITH DIAMETER AT MOST THREE

  • Park, Bo-Ram;Sano, Yoshio
    • 대한수학회지
    • /
    • 제48권4호
    • /
    • pp.691-702
    • /
    • 2011
  • The competition graph of a digraph D is a graph which has the same vertex set as D and has an edge between x and y if and only if there exists a vertex v in D such that (x, v) and (y, v) are arcs of D. For any graph G, G together with sufficiently many isolated vertices is the competition graph of some acyclic digraph. The competition number k(G) of a graph G is defined to be the smallest number of such isolated vertices. In general, it is hard to compute the competition number k(G) for a graph G and it has been one of important research problems in the study of competition graphs. In this paper, we compute the competition numbers of Hamming graphs with diameter at most three.

비디오 코딩을 위한 계층 구조의 블록 모드 확장 (Hierarchical Block Mode Structure Extension for Video Coding)

  • 이재출;천지엔러;이교혁;한우진
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.73-74
    • /
    • 2008
  • In this paper, we suggest a new video coding method using hierarchical block mode structure extension. It is based on the conventional H.264 block modes but adds hierarchically extended block modes to cover large resolution sequences. It is shown by experimental results that the proposed method can achieve a higher coding gain for HD sequences.

  • PDF

CaO이 첨가된 AZ91D 마그네슘 합금의 발화저항특성 및 용탕보호특성 평가 (Melt Protection Property and Ignition Resistance Property of CaO added AZ91D Mg Alloy)

  • 이진규;하성호;김영직;조형호;김세광
    • 한국주조공학회지
    • /
    • 제27권3호
    • /
    • pp.131-134
    • /
    • 2007
  • [ $SF_6$ ] gas that is used as a protective cover gas for Mg and Mg alloys during melting and casting has extremely high greenhouse effect. CaO added Mg alloys could maintain their original mechanical properties and original abilities such as fluidity and hot tearing susceptibility. The ignition temperature increased with increasing CaO addition under ambient atmosphere and nitrogen atmosphere. The minimum amount of $SF_6$ gas decreased by 0.13 wt%CaO added AZ91D Mg alloy in the sealed condition.

EXPLICIT EQUATIONS FOR MIRROR FAMILIES TO LOG CALABI-YAU SURFACES

  • Barrott, Lawrence Jack
    • 대한수학회보
    • /
    • 제57권1호
    • /
    • pp.139-165
    • /
    • 2020
  • Mirror symmetry for del Pezzo surfaces was studied in [3] where they suggested that the mirror should take the form of a Landau-Ginzburg model with a particular type of elliptic fibration. This argument came from symplectic considerations of the derived categories involved. This problem was then considered again but from an algebro-geometric perspective by Gross, Hacking and Keel in [8]. Their construction allows one to construct a formal mirror family to a pair (S, D) where S is a smooth rational projective surface and D a certain type of Weil divisor supporting an ample or anti-ample class. In the case where the self intersection matrix for D is not negative semi-definite it was shown in [8] that this family may be lifted to an algebraic family over an affine base. In this paper we perform this construction for all smooth del Pezzo surfaces of degree at least two and obtain explicit equations for the mirror families and present the mirror to dP2 as a double cover of ℙ2.

SD600 철근의 B급 겹침 이음에 대한 현행설계기준의 적용성 (Applicability of Current Design Code to Class B Splice of SD600 Re-Bars)

  • 최원석;정란;김진근;박홍근
    • 콘크리트학회논문집
    • /
    • 제23권4호
    • /
    • pp.449-459
    • /
    • 2011
  • 이 연구에서는 SD600 철근 B급 이음에 대한 현행 설계기준의 적용성 평가를 위하여 실험적 연구가 수행되었다. 단순 지지된 12개의 B급 겹침 이음 실험체에 단순 증가 하중을 가하여 실험하였다. 주요 변수는 겹침 이음 철근직경, 콘크리트 피복 두께, 콘크리트 강도, 횡보강 철근 간격이다. 콘크리트는 24 MPa의 보통 강도 콘크리트와 60 MPa의 고강도 콘크리트를 사용하였다. 대부분의 실험체는 현행 설계기준의 B급 이음 길이를 만족하도록 설계하였다. 실험에서 발현된 철근 응력의 평균을 현행 KCI설계기준의 예측 철근 응력과 비교하였으며, 그 결과를 통하여 SD600 철근에 대한 현행 설계기준의 적용성을 평가하였다. 현행 설계기준은 모든 D13 겹침 이음과 횡보강 철근이 배치된 D22, D32 겹침 이음에 대하여 안전측이었다. 직경 D22 이상 철근의 겹침 이음은 횡보강 철근의 사용이 권장되는 결과를 나타내었다. 고강도 콘크리트를 사용한 D22, D32 철근의 겹침 이음은 안전한 경향성을 보였으나, 확실한 검증을 위하여 추가적인 연구가 필요하다.

An NMR Study on the Phase Change of Lipid Membranes by an Antimicrobial Peptide, Protegrin-1

  • Kim, Chul
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권2호
    • /
    • pp.372-378
    • /
    • 2010
  • Membrane disruption by an antimicrobial peptide, protegrin-1 (PG-1), was investigated by measuring the $^2H$ solid-state nuclear magnetic resonance (SSNMR) spectra of 1-palmitoyl-$d_{31}$-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC_$d_{31}$) in the mixture of PG-1 and POPC_$d_{31}$ lipids deposited on thin cover-glass plates. The experimental line shapes of anisotropic $^2H$ SSNMR spectra measured at various peptide-to-lipid (P/L) ratios were simulated reasonably by assuming the mosaic spread of bilayers containing pore structures or the coexistence of the mosaic spread of bilayers and a fast-tumbling isotropic phase. Within a few days of incubation in the hydration chamber, the pores were formed by the peptide in the POPC_$d_{31}$ and POPC_$d_{31}$/cholesterol membranes. However, the formation of the pores was not clear in the POPC_$d_{31}$/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) membrane. Over a hundred days after hydration, a rapidly rotating isotropic phase increased in the POPC_$d_{31}$ and the POPC_$d_{31}$/cholesterol membranes with the higher P/L ratios, but no isotropic phase appeared in the POPC_$d_{31}$/POPG membrane. Cholesterol added in the POPC bilayer acted as a stabilizer of the pore structure and suppressed the formation of a fast-tumbling isotropic phase.

쉴드 TBM 터널의 gap parameter와 뒤채움재를 고려한 수치모델링 방법에 대한 연구 (A study on numerical modeling method considering gap parameter and backfill grouting of the shield TBM tunnel)

  • 유광호;김영진
    • 한국터널지하공간학회 논문집
    • /
    • 제19권5호
    • /
    • pp.799-812
    • /
    • 2017
  • 쉴드 TBM 터널에 대한 2차원 수치해석 시 기존 연구에서는 뒤채움재 및 실제적인 내공변위 분포를 적절히 고려하지 않았다. 따라서 본 연구에서는 이를 보완하고자 gap parameter 적용 시 굴착면에서 발생하는 실제적인 내공변위분포를 고려하고, 적정한 뒤채움재 물성치를 적용한 모델링 방법을 제시하였다. 이를 위해 단일층 풍화토 지반을 대상으로 gap parameter와 토피고가 굴착면의 지반손실량과 지표손실량으로 구성되는 체적손실량에 미치는 영향을 분석하였다. 그 결과 대부분의 지표침하가 굴착 직후에 발생하였으며, 토피고 및 gap parameter가 증가할수록 수치해석을 통해 얻은 지표침하곡선의 영향범위가 제안된 이론식보다 넓게 나타났다. 따라서 2차원 수치해석 시 쉴드 TBM 터널의 거동을 정확히 평가하기 위해서는 하중분담률을 이용하여 gap parameter를 적용하고, 뒤채움재의 물성치도 적절히 고려해야 한다고 판단된다.

Outdoor $(1{\rightarrow}3)-{\beta}$-D-glucan Levels and Related Climatic Factors

  • Hwang, Sung Ho;Yoon, Chung Sik;Park, Jae Bum
    • Journal of Preventive Medicine and Public Health
    • /
    • 제47권2호
    • /
    • pp.124-128
    • /
    • 2014
  • Objectives: To evaluate the monthly variation in the airborne $(1{\rightarrow}3)-{\beta}$-D-glucan level throughout one year and its relationship with climatic factors (temperature, relative humidity, wind speed, hours of daylight, cloud cover, and pollen counts). Methods: A total of 106 samples were collected using a two-stage cyclone sampler at five outdoor sampling locations (on top of 5 university buildings). The kinetic limulus amebocyte lysate assay was used to obtain $(1{\rightarrow}3)-{\beta}$-D-glucan levels. Results: Airborne $(1{\rightarrow}3)-{\beta}$-D-glucan levels were significantly higher in the spring, particularly in April, and temperature was significantly related to $(1{\rightarrow}3)-{\beta}$-D-glucan levels (r=0.339, p<0.05). Conclusions: $(1{\rightarrow}3)-{\beta}$-D-glucan levels may be highest in the spring, and outdoor temperature may influence $(1{\rightarrow}3)-{\beta}$-D-glucan levels.

통합 공공망과 5G 주파수 이중대역 커버용 단일 급전 안테나 개발 (Development of Single Feed Antenna for Integrated Public Network and 5G Network Frequency Dual-band Cover)

  • 홍지훈;최윤선;우종명
    • 한국ITS학회 논문지
    • /
    • 제18권6호
    • /
    • pp.233-240
    • /
    • 2019
  • 본 논문에서는 최근 5G 통신기술의 발전으로 인해 LTE와 5G 대역을 모두 커버할 수 있는 안테나가 필요로 하고 있으며, 각 대역에서 공진 주파수 대비 10%이상의 대역폭을 만족하기 위해 통합공공망(LTE)과 5G 주파수 이중대역 커버용 단일 급전 안테나를 설계, 제작하였다. 기본형 다이폴 안테나의 방사소자를 평면형 구조를 채택하였으며, 설계된 안테나는 700 MHz 안테나의 경우 동축케이블 급전 및 balun을 형성시켜 설계되었으며, 3.5GHz의 경우는 700 MHz 방사소자 급전부로부터 각각 수직 연장 후 'ㄷ'자 모양으로 접은 형태로 balun이 필요 없고 700 MHz 대역의 방사소자가 3.5 GHz 대역 방사소자의 반사판 역할을 하도록 설계하였다. 이로써, 700MHz 대역 -10 dB 대역폭 104 MHz(14.8%)과 3.5GHz 대역 -10 dB 대역폭 660 MHz(18.8%)을 나타내었고, 방사패턴 특성으로 700 MHz대역에서는 이득 8.46 dBi, 빔폭 E-plane 55°, H-plane 81°와 3.5 GHz 대역에서는 이득 6.14 dBi, 빔폭 E-plane 79°, H-plane 49°를 각각 얻었다.

국내 소재 주요 다국적 기업들의 연구개발 패턴 및 시사점: 내국인 주요 기업들과의 비교 (The Comparative Analysis of R&D Patterns between Multinational Enterprises and Domestically Owned Firms in Korea and Its Implications)

  • 조현대;이대희;김선우;곽주영
    • 기술혁신연구
    • /
    • 제14권3호
    • /
    • pp.71-92
    • /
    • 2006
  • There may exist differences in R&D patterns between multinational enterprises and domestically owned firms located in catching-up countries. This paper examines the differences in R&D patterns between different ownership in Korea. In order to do this, the paper has conducted the in-depth interview of the major multinational and local firms. The interviewed firms has been selected mainly from the telecommunication, semiconductor and display industries. The paper reveals that multinational firms tend to focus on sales-oriented R& while domestically owned firms are likely to cover the range of development, applied and basic research. The most outstanding difference lies in the length of R&D period. The domestic firms apparently turn out to conduct longer period R&D projects than multinational firms. In addition it is revealed that local firms need to develop their own capability, whereas foreign companies in Korea can acquire advanced technology and scientific knowledge from the R&D centers in their home countries. On the basis of the research findings, this paper discusses some implications and recommendations for Korea and other catching-up countries.

  • PDF