• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.345-352
• /
• 2014

In this paper, the CAD data for the optimal shape design obtained by isogeometric shape optimization is directly used to fabricate the specimen by using 3D printer for the experimental validation. In a conventional finite element method, the geometric approximation inherent in the mesh leads to the accuracy issue in response analysis and design sensitivity analysis. Furthermore, in the finite element based shape optimization, subsequent communication with CAD description is required in the design optimization process, which results in the loss of optimal design information during the communication. Isogeometric analysis method employs the same NURBS basis functions and control points used in CAD systems, which enables to use exact geometrical properties like normal vector and curvature information in the response analysis and design sensitivity analysis procedure. Also, it vastly simplify the design modification of complex geometries without communicating with the CAD description of geometry during design optimization process. Therefore, the information of optimal design and material volume is exactly reflected to fabricate the specimen for experimental validation. Through the design optimization examples of elasticity problem, it is experimentally shown that the optimal design has higher stiffness than the initial design. Also, the experimental results match very well with the numerical results. Using a non-contact optical 3D deformation measuring system for strain distribution, it is shown that the stress concentration is significantly alleviated in the optimal design compared with the initial design.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.211-215
• /
• 2006

This paper presents a new structure for the universal motor using soft magnetic composite (SMC). The stator for this new type of motor is made by combination of the SMC pole and the silicon steel yoke. The shape of the 3D SMC pole is designed to minimize ohmic loss and amount of stator coil. To design the pole shape, the 3D analysis in the design procedure is replaced with an equivalent 2D analysis. Finally, the optimal shape is analyzed by 3D FEM and the performance is discussed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.156-169
• /
• 1995

The purpose of this paper is to investigate the role of government in innovation. That is, how much should government invest in R&D activity for social welfare enhancement. An optimal control problem is proposed to answer the above question. Because of difficulties in solving the problem, simulation utilized to find an approximate solution. All results obtained from the simulation are very similar. The investment in R&D activity increases and reaches its maximum and then decreases continuously. If the importance of technology grows the investment in R&D activity should be expanded.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.18-20
• /
• 2004

This study is to find the optimal work plan of robot welding in the subassembly process of shipbuilding and to verify the found solution through 3-D simulation. The optimal work plan was established by evenly distributing the work amount to each stage and finding the shortest work sequence. The shortest work sequence was found by using the genetic algorithm. The result was compared with the practically adopted case and verified through the 3-D simulation.

• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.357-363
• /
• 1996

For the production of D-lactic acid from DL-2-chloropropionic acid, about 80 strains of bacteria capable of assimilating DL-2-chloropropionic acid as a sole carbon and energy source were isolated from the soil. JH-007 strain that showed the higest productivity of D-lactic acid and didn't produce L-lactic acid from DL-2-chloropropionic acid was selected from them and identified as Pseudomonas sp. The optimal conditions for the production of D-lactic acid from DL-2-chloropropionic acid were examined. The resting cells of JH-007 cultured in LB medium containing 3 g/l of DL-2-chloropropionic acid were used as an enzyme source. The reaction mixtures for the maximal production of D-lactic acid were consist of 10 g/l of resting cells and 3 g/l of DL-2-chloropropionic acid in 125 mM sodium carbonate buffer. The optimal pH for the reaction was 10.0 and the optimal temperature was 30$\circ$C. When 1 g/l of DL-2-chloropropionic acid was added intermittently to the reaction mixture under the above condition, 5.72 g/l of D-lactic acid was produced after incubation of 5 hrs. This amount of D-lactic acid corresponded to a 98.4% yields and the optical purity was 99.8%.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.535-541
• /
• 2015

In this study, an approximate multi-objective optimization of a wall-mounted monitor bracket arm was performed. The rotation angle of the bracket arm was determined considering the inplane degree of freedom. We then formulated an optimization problem on maximum stress and deflection. Analyses of mean and design parameters were conducted for sensitivity regarding performance with orthogonal array and response surface method (RSM). RSM models of objective and constraint functions were generated using central composite (CCD) and D-optimal design. The accuracy of approximate models was evaluated through $R^2$ value. The obtained optimal solutions by non-dominant sorting genetic algorithm (NSGA-II) were validated through the finite element analysis and we compared the obtained optimal solution by CCD and D-optimal design.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.75-84
• /
• 1994

In this paper we address the issue of how an optimal sample size computation relates the level of precision required for travel demand estimations and transportation planning. We approach the problem by 1) deriving a theoretical solution, 2) developing a computational procedure (algorithm) to implement the theoretical solution, and 3) demonstrating a practical application. Ultimately, we construct a formal scheme of optimal sample size computation for use in travel data collection processe.

• Communications for Statistical Applications and Methods
• /
• v.7 no.1
• /
• pp.357-370
• /
• 2000

This study has adapted a genetic algorithm for an optimal design for the first time. the models that was used a simulation are the first and second order response surfaces model, Using an genetic algorithm in D-opimal it is more efficient than previous algorithms to get an object function. Not like other algorithm without any restrictions like troublesome about the initial solution not falling into a local optimal solution it's the most suitable algorithm.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.5
• /
• pp.264-268
• /
• 2000

In discuss how the existing study results that decide optimum release time are rational and reasonable, considering the cost and reliability simultaneously in this paper. As a study method this paper examines the proposed results and their methodologies centering around the existing related papers for the general cost-reliability optimal release policies, especially their limitation for the derived results.

• East Asian mathematical journal
• /
• v.35 no.5
• /
• pp.535-545
• /
• 2019

This paper is concerned with the optimal control problem associated to strong solution of Belousov-Zhabotinskii reaction model in 2D domain. That is, we otain the global existence of strong solution and show the existence of optimal control.