• Journal of Korea Water Resources Association
• /
• v.51 no.1
• /
• pp.81-88
• /
• 2018

The rainfall-runoff model made of sewer networks in the urban area is vast and complex, making it unsuitable for real-time urban flood forecasting. Therefore, the rainfall-runoff model is constructed and simplified using the sewer network of Daerim baisn. The network simplification process was composed of 5 steps based on cumulative drainage area and all parameters of SWMM were calculated using weighted area. Also, in order to estimate the optimal simplification range of the sewage network, runoff and flood analysis was carried out by 5 simplification ranges. As a result, the number of nodes, conduits and the simulation time were constantly reduced to 50~90% according to the simplification ranges. The runoff results of simplified models show the same result before the simplification. In the 2D flood analysis, as the simplification range increases by cumulative drainage area, the number of overflow nodes significantly decreased and the positions were changed, but similar flooding pattern was appeared. However, in the case of more than 6 ha cumulative drainage area, some inundation areas could not be occurred because of deleted nodes from upstream. As a result of comparing flood area and flood depth, it was analyzed that the flood result based on simplification range of 1 ha cumulative drainage area is most similar to the analysis result before simplification. It is expected that this study can be used as reliable data suitable for real-time urban flood forecasting by simplifying sewer network considering SWMM parameters.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.4
• /
• pp.262-268
• /
• 2014

The management of soil chemical properties is very important to sustainable agriculture of many horticultural crops, including cucumber. This study was conducted to find the optimal soil properties of environmentally friendly agriculture in controlled horticulture. Soil chemical properties of 267 samples were collected from soil in Chungnam Province. The average of pH, EC, OM, available $P_2O_5$, exchangeable K, Ca, and Mg was 6.1, $5.38dS\;m^{-1}$, $34g\;kg^{-1}$, $1,321mg\;kg^{-1}$, $1.50cmol_c\;kg{-1}$, $10.3cmol_c\;kg{-1}$, and $3.4cmol_c\;kg{-1}$, respectively. The organic matter content in silty clay loam was significantly higher than in the other soil textures, whereas the pH, EC, exchangeable K, and Mg in loamy fine sand showed significantly lower among soil textures. The EC value and exchangeable Mg concentration were highest in mountain foot-slope soils. The frequency distribution within optimum range of soil chemical properties was 26.2%, 30.3%, 2.3%, 3.8%, 3.4%, and 6.7% for pH, OM, available $P_2O_5$, exchangeable K, Ca, and Mg, respectively. Especially, excessive portion of available $P_2O_5$ and exchangeable Ca were 94.0% and 94.4%, respectively. The EC value and organic matter content of soil samples were positive correlation with all chemical properties except soil pH. In principle component analysis of chemical properties in soil samples, the percentage of variance explained by PC 1 was 52.2%, while PC 2 explained 21.3% of the variance, for a cumulative total of 73.5%. In conclusion, these results are considered to improve soil nutrient management for sustainable controlled horticulture.

• Korean Journal of Microbiology
• /
• v.34 no.4
• /
• pp.212-218
• /
• 1998

An obligately methylotrophic bacterium which produces extracellular polysaccharide (EPS) was isolated through methanol-enrichment culture technique. The isolate was aerobic, nonmotile, and gram negative rod and exibited catalase, but no oxidase, activity. Plasmid, carotenoid, and poly-${\beta}$-hydroxybutyric acid were not found. The guanine plus cytosine content of DNA was 52-56%. The isolate was found to grow only on methanol and monomethylamine. Growth was optimal ($t_d=2.4h$) at $35^{\circ}C$ and pH 6.5 in a mineral medium containing 0.5% (v/v) methanol, 25 mM phosphate, and 0.212% ammonium sulfate. Methanol was assimilated through the ribulose monophosphate pathway. Maximun amount of EPS was produced in cells growing at the mid-stationary growth phase at $30^{\circ}C$ in a mineral medium (PH 6.5) containing 1.0% (v/v) methanol in the CIN ratio of 54.7. Thin-layer chromatographic and high performance liquid chromatographic analysis revealed that the EPS was composed of glucose and galactose. EPS which was not treated with ethanol (Pbe) exhibited stable viscosity under various concentrations of salts and temperatures hut showed high viscosity at low pH. EPS precipitated with ethanol (Pae) was found to be more stable in viscosity than the Pbe at various salt concentrations, temperatures, and pH. The Pae also exhibited higher viscosity than the Pbe and xanthan gum. Scanning electron microscopy revealed that the lyophilized Pbe and Pae have a multi-layered structure and a structure of thick fibers, respectively.

• Tunnel and Underground Space
• /
• v.23 no.3
• /
• pp.180-191
• /
• 2013

The purpose of this research was to find an optimal quarrying for marble by analyzing the applicability and the work efficiency of a chain saw machine newly introduced in the underground Baekwoon mine. From the test results of the physical properties of Baekwoon marble, which affects the efficiency of rock cutting, it was found to have similar physical characteristics as the ones which are now being produced in the other areas in Korea. And especially it shows isotropic property, which can be thought to be advantageous as a dimensional stone. To check the long-term quality of the marble as a stone material, several tests such as corrosion resistance test and abrasion test were carried out. It was found to be vulnerable to acid rain with decrease of weight and seismic wave velocity after applying artificial rain at pH 5.6 for 50 times. The percentage of wear from abrasion test was 22.67%. The working time and cutting speed of the chain saw machine were recorded and analyzed during the test-run at the quarry. The overall work cycle was assorted into 9 unit operations and the operating time per each unit was drawn. The operating times for the two cutting patterns, which could be possibly applicable to the work site, were compared. The results indicated that the pattern B, that the cutting sequence was set to minimize the movement of the machine, showed 6% less working hours than the pattern A, which first cuts the outer boundary. With cutting pattern analysis, the ore body in the Baekwoon mine was 3 dimensionally modeled and a quarrying plan considering the existing conditions of the marble was suggested.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.66-71
• /
• 2014

Synthesis of exo-tetrahydrodicyclopentadiene (exo-THDCPD) through the isomerization of endo-tetrahydrodicyclopentadiene (endo-THDCPD) was investigated over HY zeolite catalysts. Conversion of endo-THDCPD increased with the increase of $Si/Al_2$ ratio of HY zeolite catalysts, which can be attributed to increase of acid strength with increase of $Si/Al_2$ ratio. Yield of exo-THDCPD, however, was the highest over HY with $Si/Al_2$ ratio of 30, because the production of cyclopentadiene and oligomers was minimized. The optimal reaction temperature was $180^{\circ}C$ because the higher reaction temperature increased the production of by-products. The yield of exo-THDCPD also increased with the amount of the catalyst in feed. In the isomerization reaction of endo-THDCPD using the HY zeolite catalysts, it was confirmed that the internal diffusion resistance in the pore of catalysts would have more significant effects on the reaction activity than that of the external diffusion resistance of catalysts.

• Journal of Food Hygiene and Safety
• /
• v.29 no.4
• /
• pp.312-315
• /
• 2014

The present study demonstrated the development and validation of the method for the quantification of phenol in food using gas chromatography coupled with mass spectrometry (GC-MS). After spiking of internal standard (Phenol-$d_5$) to food, those samples were extracted with organic solvent mixture (acetone : dichloromethane = 1 : 1, v/v) using ultra sonic extractor and cleaned by gel permeation chromatography (GPC) technique. The amount of phenol was determined by GC/MS. To validate the developed method, we evaluated parameters were the selectivity, linearity, accuracy, precision, and recovery. To demonstrate the selectivity of the method, blank samples of rice, corn, and fish(mackerel) were prepared and subjected to GC-MS analysis. To verify the linearity of the method, six different standard concentrations of phenol at 0.01, 0.05, 0.1, 0.5, 1 and 2.5 mg/kg were evaluated. The correlation coefficient ($r^2$) of calibration curve was 0.9999. The recovery rate for phenol standard calculated by internal standard method were 82.2~101.5% for samples fortified with 0.25, 0.50, and 1.0 mg/kg, respectively. Also the repeatability and reproducibility for validation of precision were 0.2~5.5%. According to the result of the validation, this established method was suitable for AOAC guideline. The limit of detection (LOD) for phenol analysis were 0.03~0.1 mg/kg, and the limit of quantification (LOQ) were 0.1~0.3 mg/kg. Therefore, we established the optimal analysis method for determination of phenol in food using GPC and GC/MS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.725-731
• /
• 2016

This study numerically investigates the thermal performance of a 2.0-kW butane-based combustion heating system for an electric vehicle under cold conditions. The system is used for cabin space heating and coolant-based battery thermal management. ANSYS CFX 17 software was used for parametric analysis. The mass flow rates of cold air and coolant were varied, and their effects were compared. The numerical results were validated with theoretical studies, which showed an error of 0.15%. As the outside air mass flow rates were increased to 0.005, 0.01, and 0.015 kg/s, the cabin supply air temperature decreased continuously while the coolant outlet temperature increased. When the coolant mass flow rates were increased to 0.005, 0.01 and 0.015 kg/s, the air temperature increased while the coolant outlet temperatures decreased. The optimal mass flow rates are discussed in a consideration of the requirements for high cabin heating capacity and efficient battery thermal management.

• Resources Recycling
• /
• v.6 no.3
• /
• pp.15-21
• /
• 1997

Flyash from a coal-hed power plan1 is produced approximtcly 3 million tons m 1996 and causes the serious environmentalpmblem due to the disposal in the ash pond. Flyash is an accepted additive in concrete where it adds strength, sulfate ateresistanceand reduced cost, provided acccptablc levcls of unbunrned carbon are mmtmed This papzr describes to investigate thc technicalfeasibility of a dry triboelcctrostatlcp roccss to scparate unburned carbon h m f lyash into economically valuable produck Puliclesof unburned carbon and flyash can be impded positivc and negative surface charzes. rcapeclively. with a copper tniochargcr dueto dirferences in the work function values of thc particles and the tnbacharger. and cm he separated by passing thcm throuph anexternal electic field. A laboratory s d e separation system consists of r sacw feeder for ash supply, a tniocharger, verticalcollecling copper plates, power supplies, a flow meter, and a fan. Separation tests taking into account separahian efficiency and ashrecovery showed that flyash recovery was sh-nngly dependent an thc tnbocharger geomzhy, elect"c ficld strength. flyssh s ~ c a,n dash feeding late. Optimal separation conditions were flyash size less than 125 Fm and electric field shcngrh of 200 kV1m. Ovcr 80%of the flyash with 7% lass on ignition was recovered at wrbon contznts less than 3%bon contznts less than 3%

• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2011

Optimal dispersion and fabrication conditions of carbon nanotube (CNT) embedded in phenolic resin were determined by electrical resistance measurement; and interfacial property was investigated between plasma treated carbon fiber and CNT-phenolic composites by electro-micromechanical techniques. Wettability of carbon fiber was improved significantly after plasma treatment. Surface energies of carbon fiber and CNT-phenolic nanocomposites were measured using Wilhelmy plate technique. Since surface activation of carbon fiber, the advancing contact angle decreased from $65^{\circ}$ to $28^{\circ}$ after plasma treatment. It was consistent with static contact angle results of carbon fiber. Work of adhesion between plasma treated carbon fiber and CNT-phenolic nanocomposites was higher than that without modification. The interfacial shear strength (IFSS) and apparent modulus also increased with plasma treatment of carbon fiber.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.220-227
• /
• 2021

PCT (Power Cable Tunnel) and UT (Utility Tunnel), which are non-transport underground infrastructures, are mostly RC (Reinforced Concrete) structures, and their durability decreases due to the deterioration caused by carbonation over time. In particular, since the rate of carbonation varies by use and region, a predictive model based on actual carbonation data is required for individual maintenance. In this study, a carbonation prediction model was developed for non-transport underground infrastructures, such as PCT and UT. A carbonation prediction model was developed using multiple regression analysis and deep neural network techniques based on the actual data obtained from a safety inspection. The structures, region, measurement location, construction method, measurement member, and concrete strength were selected as independent variables to determine the dependent variable carbonation rate coefficient in multiple regression analysis. The adjusted coefficient of determination (Ra2) of the multiple regression model was found to be 0.67. The coefficient of determination (R2) of the model for predicting the carbonation of non-transport underground infrastructures using a deep neural network was 0.82, which was superior to the comparative prediction model. These results are expected to help determine the optimal timing for repair on carbonation and preventive maintenance methodology for PCT and UT.