• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.211-213
• /
• 1994

In tins paper, the method of analysis of induction heating is proposed. It's a coupled problem. First, eddy current problem with current source is analyzed using 2-D finite element method, from which eddy current distribution is obtained. And the second, heat source can be calculated directly by the eddy current. Also the temperature distribution is obtained using 2-D finite element method. Eddy current problem and heat transfer problem are dealt with under steady state in this paper.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.670-672
• /
• 1995

This paper deals with the robust two-degree-of-freedom multivariable control system using $H_{2}/H{\infty}$optimization method which can achieve the robust stability and the robust performance, simultaneously. The feedback controller can obtain the robust stability property. The feedforward controller can obtain the robust performance property under modelling error. The robust two-degree-of-freedom multivariable control system is applied to the nonlinear multivariable boiler-turbine system. The validity of the proposed method is verified though being compared with LQG/LTR design method.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.123-127
• /
• 1997

Various recrystallization techniques has been applied to control morphology and size of NTO(3-nitro-1, 2, 4-triazole-5-one) crystals. With cooling method, it was found that the size of NTO at aqueous solution was controlled in the range of 5 to 500 $\mu\textrm{m}$. The spherical or cubic shapes of particles were obtained by adjusting operating conditions. Hexagonal and cubic shaped crystals of NTO were also obtained by sonication and evaporative method using aqueous solution of NTO. Their particle sizes were ranged 20 to 30 $\mu\textrm{m}$. In gas anti-solvent method with NTO/DMF and NTO/DMSO solutions, cubic type of NTO was obtained and the range of their sizes was 0.5-2$\mu\textrm{m}$.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.412-417
• /
• 1999

The analytical results obtained by microwave digestion and acid digestion methods for sample pretreatment to determine metal impurities in silicon wafer by inductively coupled plasma-mass spectrometry (ICP-MS) were compared. In order to decompose the silicon wafer, a mixed solution of $HNO_3$ and HF was added to the sample and the metal elements were determined after removing the silicon matrix by evaporating silicon in the form of Si-F. The recovery percentages of Ni,Cr and Fe were found to be 95∼106% for both microwave digestion and acid digestion methods. The recovery percentage of Cu obtained by the acid digestion method was higher than that obtained by the microwave digestion method. For Zn, however, the microwave digestion method gave better result than the acid digestion method. Fe was added to a silicon wafer using a spin coater. The concentration of Fe in this sample was determined by lCP-MS, and the same results were obtained in the two pretreatment methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.9-10
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.25-26
• /
• 2011

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.3
• /
• pp.282-286
• /
• 1990

Currently, mechanization and automation have been introduced into rice harvest and drying process due to the shortage of man power. After rice cultivars, Chucheong and Milyang #23 were cutted with manual method (H1) or harvested with combine (H2), the threshed grain were dried in natural sun-drying (D1), in natural air in-bin system (D2), or in contineous hot-air drier (D3). We have evaluated grain losses, operation hour, and grain quality on each harvest and drying methods. Shattering loss during harvesting with combine was not dirfered significant from that of manual method, but threshing loss was 1.2% higher in combine harvest than in manual. Operation hours required for combine harvest was 3.5 times faster than for manual, even without head threshing. There was a significant difference bel ween cultivars in harvesting loss, which Milyang #23, a Tongil rice had two times more grain loss than Chucheong, a Japonica rice. Drying hours required to reduce to 14% grain moisture content were ten days for H1D1, 5-9 days for H2 D1, 2-3 days for H2D2, and only 15 hours for H2D3, respectively. In grain quality, complete grain ratio after dehulling was decreased about four percent in H2D3 compared to H1D1. while it was lower in Milyang #23 than in Chucheong, Hot-air drier increased occurence of cracked and broken grain. Combine harvest increased significantly these incomplete grain ratio of :Milyang #23, but not Chucheong.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.711-712
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.1051-1052
• /
• 2010

• Transactions of Materials Processing
• /
• v.32 no.5
• /
• pp.255-267
• /
• 2023

Recently, 3D printing using a material extrusion method is used in various fields. Since plastic material has lower strength than steel, research to increase the strength is continuously being conducted. This study investigates the lattice structure for additive manufacturing of six 3D infill patterns (octet, quarter cubic, cubic, cubic subdivision, triangles and cross 3D) which consist of tetragons, hexagonal trusses, equilateral triangles and cross shapes. Consequently, in the tensile strength considering the weight and printing time, octet, quarter cubic, cubic and triangles patterns tended to increase linearly as the infill density increased, except for the infill density of 20%. However, the tensile strength/weight performed better than the infill density of 100% when the cubic subdivision pattern had the infill density of 20% and the cross 3D pattern had the infill density of 40%. Considering the weight and printing time, the infill patterns of high tensile strength were octet, quarter cubic, cubic, cubic subdivision, triangles and cross 3D order.