• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.197-205
• /
• 2015

Offshore structures for the gas production are exposed to the risk of gas leaks, and gas explosions can result in fatal damages to the primary structures as well as secondary structures. To minimize the damage from the critical accidents, the study of the dynamic response of structural members subjected to blast loads must be conducted. Furthermore, structural dynamic analysis has to be performed considering relationships between the natural frequency of structural members and time duration of the explosion loading because the explosion pressure tends to increase and dissipate within an extremely short time. In this paper, the numerical model based on time history data were proposed considering the negative phase pressure in which considerable negative phase pressures were observed in CFD analyses of gas explosions. The undamped single degree of freedom(SDOF) model was used to characterize the dynamic response under the blast loading. A blast wall of FPSO topside was considered as an essential structure in which the wall prevents explosion pressures from the process area to utility and working areas. From linear/nonlinear transient analyses using LS-DYNA, it was observed that dynamic responses of structures were influenced by significantly the negative time duration.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.2
• /
• pp.93-100
• /
• 2013

A variety of researches on the concrete with high volume mineral admixture have increased in recent years. In fact, it is very important to find appropriate replacement ratio of concrete with high volume mineral admixture in order to apply in the field. In this study, compressive strength according to fly ash and blast furnace slag replacement ratio as well as curing temperature was measured in the conditions of obtaining the same workability in order to examine the characteristics of concrete with high volume mineral admixture. In conclusion, it was found that the compressive strength at the age of 3 days decreased by 1.4MPa and the compressive strength at the age of 28 days decreased by 3.8MPa when the fly ash replacement ratio increased by 10%. Also, it was found that the compressive strength at the age of 3 days decreased by 1.0MPa and the compressive strength at the age of 28 days decreased by 0.9MPa when the blast furnace slag replacement ratio increased by 10%. Through the tests, we obtained the basic data for developing the future research on the concrete with high volume mineral admixture for housing structure.

• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.245-252
• /
• 2015

As people have more interest in environment-friendly structures recently, many researchers are actively researching non-sintered cement in Korea and other countries. Non-sintered cement shows various characteristics of its reaction products and hardeners, depending on the kind of alkali activators. Thus, this study manufactures ground granulated blast furnace slag based non-sintered cement binder by using circulating fluidized bed combustion ash, which is a kind of industrial byproduct, as a stimulant, and investigated its hardening characteristics and hydration, depending on the rate of circulating fluidized bed combustion ash. Besides, this study investigated its insulation property according to the weight lightening of non-sintered cement. As a result, ettringite and C-S-H were mainly formed in the hydration, and it was possible to manufacture a non-sintered cement hardener over 50 MPa. Lastly, it was possible to manufacture a non-sintered cement hardener in a thermal conductivity level of $0.127W/m{\cdot}K$ when the compressive strength was 10 MPa for weight lightening.

• Explosives and Blasting
• /
• v.39 no.3
• /
• pp.15-23
• /
• 2021

Ventilation shafts are pathways in mines and tunnels for the removal of dust or smoke during underground space construction and operation. In mines, blasting with long blast holes is preferred for the excavation of a ventilation shaft in the 10~20m long crown pillar section. In this case, the bottom part of the blast hole is completely drilled in order to determine the drilling error, and this causes a problem of lowering the explosive charge and blasting efficiency. It is possible to solve the problem of explosive loading and to increase the blast efficiency by covering the curb of the blasthole by using stemming material. In this study, simulations for the blasting of a ventilation shaft were performed with various stemming lengths and the blasthole diameters(45, 76mm) using AUTODYN 2D SPH(Smooth particle hydrodynamics) analysis technique. Also the optimal bottom stemming column was derived by checking the size of the boulder and burden line according to blasting. Analysis result, blasting efficiency is lessened in case of stemming length less than 30cm and the optimal length of the stemming material should be 30cm or higher to achieve high efficiency of blasting.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.99-106
• /
• 2006

In the present study, in order to clarify the effects of latent hydraulic property of granulated blast furnace slag (GBF slag) on the liquefaction, GBF slag was cured in the high temperature alkali water (adding the calcium hydroxide, pH=12, water temperature is about $30^{\circ}C$), and then the cyclic and the static tri-axial compression tests were carried out. Then the results were compared with those for Japanese standard sand of Toyoura sand and natural sand of Genkai sand. From the test results, it is clarified that the liquefaction strength of the GBF slag increases with the increase of the curing period by the hardening due to the latent hydraulic property. It is also shown that GBF slag with Dr=50% and 80% which was cured for 189 days in the fresh-water shows cohesion due to developing of latent hydraulic property. In addition, as for the liquefaction strength of GBFS during the hardening process, a linear relation between the cyclic stress ratio $R_{20}$ at the number of stress cycles Nc=20 and cohesion $C_{d}$ was observed. It is also clarified that the liquefaction strength for cured GBF slag in the high temperature alkali water is predicted by the cohesive strength or the unconfined compressive strength.

• 한국균학회소식:학술대회논문집
• /
• 2014.05a
• /
• pp.30-30
• /
• 2014

We isolated various yeasts from wild flowers in main islands, Jejudo, Ulleungdo and Yokjido of Korea and their yeasts were identified by comparison of their PCR-amplified D1/D2 regions of 26S rDNA using the BLAST database. Thirty two yeast strains of fourteen species were isolated from wild flowers of Jejudo. Forty eight yeast strains of twenty two species were isolated and identified from wild flowers of Ulleungdo, Korea. Sixty yeast strains belonged to twenty five species were isolated identified from wild flowers of Yokjido in Tongyeong, Korea. Only Metschnikowia reukaufii was overlapped from the three different islands areas. Two species overlapped from Jejudo and Ulleungdo: Pichia guilliermondii, Metschnikowia reukaufii. Seven species were overlapped from Ulleungdo and Yokjido: Cryptococcus albidus, Cryptococcus laurentii, Metschnikowia reukafii, Pichia scolyti, Rhodotorula glutinis, Rhodotorula graminis and Rhodotorula mucilaginosa. Four species were overlapped from Jejudo and Yokjido: Candida sp. Cryptococcus aureus, Metschnikowia reukafii and Pseudozyma sp.

• Annual Conference of KIPS
• /
• 2002.04a
• /
• pp.79-82
• /
• 2002

단백질 3차 구조 정보는 PDB에서 플랫화일 형태로 제공되고 있으며 이러한 플랫화일 각각의 엔트리들은 단백질 3차 분자 구조를 구성하는 원자들의 공간좌표정보, 서열정보, 실험정보 및 참조정보 등으로 구성된다. 이러한 정보들을 포함하고 있는 플랫파일로부터 필수적인 구조정보 및 서열정보 등의 효율적 검색을 위해서는 플랫파일을 데이터베이스로 구축함과 동시에, 구축된 데이터베이스를 위한 유사성 검색시스템 구축이 요구된다. 따라서, 이 논문에서는 Protein DataBank에서 제공하는 플랫파일을 공간객체 모델링기법에 기반한 관계형 데이터베이스로 구축하고 PSI-BLAST를 적용하여 단백질 서열 유사성 검색 시스템을 구축한다. 이렇게 함으로써 단백질 3자 구조 분자를 구성하는 원자에 대한 검색과 구조에 대한 서열 유사성 검색을 통하여 단백질 3차 구조 분류 및 구조 예측 시스템 구축에 활용할 수 있다.

• Journal of Species Research
• /
• v.10 no.4
• /
• pp.344-349
• /
• 2021

The purpose of this study was to isolate and identify wild yeasts from soil of Gyeongju city, and Haemadipsa rjukjuana of Gageodo Island, characterizing unrecorded yeast strains from Korea. The molecular analysis of the D1/D2 domain of 26S rDNA of yeast was performed using the Basic Local Alignment Search Tool (BLAST). No official report exists describing these three species: one species in the genus Candida, one species in the genus Debaryomyces, and one species in the genus Solicoccozyma. Candida saitoana YL9, Debaryomyces fabryi YL1, and Solicoccozyma terrea 20g9-1 are recorded for the first time from Korea. All three strains were oval shaped and polar binding, while positive for glucose, ᴅ-xylose, and ᴅ-cellobiose. Morphological, physiological, and biochemical properties are described in the species descriptions.

• Journal of Species Research
• /
• v.13 no.1
• /
• pp.100-104
• /
• 2024

The purpose of this study was to isolate and identify wild yeasts from soil samples collected in Daegu and Cheongju city, Republic of Korea. To identify the wild yeast strains, pairwise sequence comparisons of D1/D2 region of the 26S rRNA gene sequence were done using Basic Local Alignment Search Tool (BLAST). The cell morphologies were observed by phase contrast microscope and assimilation test are done using API 20C AUX kit. All strains were assigned to the phylum Basidiomycota. Among 13 strains, 11 strains were previously reported, but two strains were unreported from the Republic of Korea. The two unrecorded yeast strains, GW1-3 and PG1-1-10C, belong to the genus Solicoccozyma (family Piskurozymaceae, order Filobasidiales, class Tremellomycetes). The two strains had oval-shaped and polar budding cells. This research showed the morphological and biochemical properties of the two unreported yeast species that had not officially reported in Korea.

• Journal of Species Research
• /
• v.13 no.1
• /
• pp.105-110
• /
• 2024

The purpose of this study was to isolate and identify wild yeasts from soil samples collected in Seoul and Daejeon, Republic of Korea. To identify wild yeast strains, pairwise sequence comparisons of D1/D2 region of the 26S rRNA gene sequence were done using Basic Local Alignment Search Tool (BLAST). The cell morphologies were observed by phase contrast microscope and carbon source assimilation test were done using API 20C AUX kit. Among the 13 isolated strains, 11 strains were previously reported, but two strains have never been reported from Republic of Korea. The 13 strains were assigned to the phylum Basidiomycota. The two unrecorded yeast strains B2UV-201 and DJ1-5-B-10C belong to the genera Rhodotorula and Rhodosporidiobolus, respectively. The two unrecorded yeast strains are oval shaped and polar budding cells. This research focuses on the morphological and biochemical properties of the two unreported yeast species that have not officially been reported in Korea.