• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.17-21
• /
• 2017

BACKGROUND: Castor oil and wormseed extract are important active ingredients for biopesticide, and ricinoleic acid in castor oil and three monoterpenes (ascaridole, carvacrol and p-cymene) in wormseed extract are known bioactive substances. However, their stabilities had not been studied, even though the stability was the core property for estimation of shelf-life of biopesticide. Aimed to investigate the thermal stabilities of the bioactive substances in castor oil and wormseed extracts. METHODS AND RESULTS: The contents of ricinoleic acid and three monoterpenes (ascaridole, carvacrol and p-cymene) were analyzed by gas chromatography (GC). The thermal stabilities of the bioactive substance were measured at $0^{\circ}C$, $23^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$, $45^{\circ}C$ and $54^{\circ}C$ for 84 d. The half-lives of ricinoleic acid in biopesticides was ranged from 28.9 d to 57.8 d at $30^{\circ}C$, and the stability of pure castor oil were located in the range ($t_{1/2}$=46.2d for Indian product and 27.7 d for Korean product) at the same temperature. The half-lives of the total monoterpenes in biopesticides were ranged from 3.9 d to 27.7 d at $30^{\circ}C$. Among the monoterpenes, the stability ascaridole and p-cymene were decreased in acidic condition. All the bioactive substances showed similar stability on the different thermal conditions. CONCLUSION:The half-lives of most bioactive substance from castor oil and wormseed extracts were less than 100 d. To increase the stability of bioactive substance in biopesticide, stabilizing additives like antioxidant and oxygen remover should be considered to extend of the shelf-life.

• Korean journal of food and cookery science
• /
• v.17 no.5
• /
• pp.490-496
• /
• 2001

The purpose of this study was to investigate the effects of ingredients(spices and medicinal plants) on the physicochemical properties of Pyunyuk a Korean style-cooked pork. Pyunyuk samples were prepared by the following 5 cooking conditions: Control(pork, water), A(pork, water, soy sauce), B(pork, water, soy sauce, onion, ginger), C(pork, water, soy sauce, onion, ginger, licorice, cinnamon) and D(pork, water, soy sauce, onion, ginger, licorice, cinnamon, clove and chestunt inner skin(CIS). The contents of ash, crude protein in loin and shank Pyunyuk were not significantly different among Pyunyuk samples, but crude fat content of C, D were significantly lower than control, A and B(p＜0.05). In Hunter’s color values of Pyunyuk, the lightness(L) was decreased by the addition of multiple ingredients, whereas the redness was increased. In mechanical characteristics, the hardness of control was the highest among the samples(p ＜0.05). In sensory evaluation, sample D obtained the highest score in flavor, taste, hardness, cohesiveness, springiness, gumminess and overall acceptability(p<0.05), and it was most preferred by the panels. There were higher negative-correlations between mechanical hardness and sensory characteristics of flavor, taste, cohesiveness, gumminess, brittleness and overall acceptability. From these results, it could be concluded that Pyunyuk ingredients(herbs and medicinal plants) reduce the content of crude fat, increase the tenderness and improve the flavor and taste of pork during cooking.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.459-468
• /
• 2021

Blocking electromagnetic waves on the exterior walls of buildings effectively reduces the intensity of electromagnetic fields in buildings, which leads to attenuation of electromagnetic disturbances, so there is a great interest in developing technologies. In this study, SiC by-products and graphite generated in the semiconductor field were selected and mixed into mortar after pretreatment such as pulverization to evaluate their physical properties and electromagnetic wave shielding performance. Considering the economic efficiency of each shielding material, only 10% volume of the outermost side of the experiment was mixed with each shielding material to evaluate the shielding performance. The shielding performance was predicted when the experiment was manufactured by mixing the shielding material with the entire volume of the experiment using the shielding effect evaluation formula. The results of the experiment showed that the shielding performance was up to 20 dB when SiC grains were mixed with shielding materials, the shielding performance was up to 18 dB when graphite powder was mixed with shielding materials, and the shielding performance was up to 28 dB when SiC powder was mixed with shielding materials, and the shielding performance was close to 30 dB, which is known to have a shielding rate of 99.9%.

• Journal of Nutrition and Health
• /
• v.47 no.2
• /
• pp.89-98
• /
• 2014

Purpose: Association of low intake of calcium (Ca) and inadequate vitamin D (VD) status with higher prevalence rates of obesity has been reported. This study was conducted in order to investigate the effects of different levels of whey Ca and VD intake on lipid metabolism in growing rats. Methods: A total of 56 five-week-old male Sprague-Dawley rats were divided into seven groups and fed for five weeks. Ca groups were divided into three levels, low, normal, and high (0.25%, 0.5%, 1%). VD subgroups in the low and high Ca groups were divided into three levels, low, normal, and high (10 IU, 1,000 IU, and 5,000 IU). The effects of Ca and VD on each group were evaluated by two way ANOVA. Results: Significantly higher amounts of abdominal fat, visceral fat, and epididymal fat were observed in the Low-Ca groups than in the Normal-Ca and High-Ca groups. Serum leptin levels of Low-Ca groups were higher than those of Normal-Ca and High-Ca groups. The highest serum parathyroid hormone concentration was observed in the low Ca low VD group. The levels of serum 25(OH)D were significantly increased with increasing dietary VD levels. Significantly higher serum levels of triglycerides, total cholesterol, and HDL-cholesterol were observed in the low Ca groups than in the normal Ca and high Ca groups. Conclusion: These results indicate that low calcium intake increased serum lipid level and body fat amount.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.44-50
• /
• 1994

In order to develop an effective extraction method of sea mustard, five different methods of boiling in 0.5% $Na_{2}EDTA(A)$, in 0.1 N HCI(B), in 0.5% $Na_{2}EDTA$ and 0.1 N HCI(C) and hydrolysis with two different polysaccharides-hydrolyzing enzymes of Celluclast(method D) and Ultrazyme(method E) prior to boiling in 0.5% $Na_{2}EDTA$ and 0.1 N HCI were studied. The highest yields of solids(63.14%) and protein(26.39%) from the extract were obtained by method D. The concentration of amino-N was significantly improved by method C(870 ppm) followed by method D(770 ppm), B(570 ppm) and A(480 ppm) compared to the control(270 ppm). Total free amino acids, mainly alanine, glutamic, and aspartic acids, were greatly increased by methods of A(8.88 mg%), D(4.14 mg%) and E(4.18 mg%) which were $2.5{\sim}5.1$ times higher than those in control(1.71 mg%). The sensory characteristics showed that extract D was significantly low in intensity of fishy odor and high in seaweed taste. Therefore, method D was suggested as the effective extraction method.

• Korean Journal of Materials Research
• /
• v.28 no.4
• /
• pp.254-259
• /
• 2018

General D-glass(Dielectric glass) fibers are adaptable to PCBs(Printed circuit boards) because they have a low dielectric constant of about 3.5~4.5. However, very few papers have appeared on the physical characteristics of D-glass fibers. D-glass fibers were fabricated via continuous spinning process using bulk D-glass. In order to fabricate the D-glass, raw materials were put into a Pt crucible, melted at $1650^{\circ}C$ for 2 hrs, and then annealed at $521{\pm}10^{\circ}C$ for 2 hrs. We obtained transparent clear glass. The transmittance and adaptable temperature for spinning of the bulk marble glass were characterized using a UV-visible spectrometer and a viscometer. Continuous spinning was carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1368^{\circ}C$ to $1460^{\circ}C$, while the winder speed was between 100 rpm and 200 rpm. We investigated the physical properties of the D-glass fibers. The average diameters of the glass fibers were measured by optical microscope and FE-SEM. The average diameters of the D-glass fibers were 21.36 um at 100 rpm and 34.06 um at 200 rpm. The mechanical properties of the fibers were confirmed using a UTM(Universal materials testing machine). The average tensile strengths of the D-glass fibers were 467.03 MPa at 100 rpm and 522.60 MPa at 200 rpm.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.281-286
• /
• 2010

Purpose: This research provided basic data for refraction by comparing the corrected diopter of trial lens and phoropter. Methods: We compared the corrected diopter of trial lens and phoropter, and analyzed statistical significance and relations of the spherical lens corrected diopter and cylindrical lens corrected diopter according to the types (trial lens and phoropter) of subjective refractive instruments. Also we analyzed statistical significance and relations between cylindrical lens corrected diopter at the astigmatism and the types (trial lens and phoropter) of subjective refractory instruments. Results: When we measured the corrected diopter of simple myopia, the mean value for corrected diopter was S-2.74D using the trial lens and S-2.65D using the phoropter. So the corrected diopter was 0.09D smaller when measured by phoropter. The degree of astigmatism was measured C-0.81D using the trial lens and C-0.77D using the phoropter which showed that the measured value was 0.04D smaller using the phoropter. On correlation analysis between the refractive instruments (trial lens and phoropter) and the corrected diopter, there was significant (p<0.01) strong correlation between refractory machine and corrected spherical diopter (r=0.996) and the correlation between refractory machine and corrected cylindrical diopter was r=0.986 and was also significant (p<0.01). Conclusions: The use of phoropter than trial lens was more desirable when performing refraction on high myopia (simple refractive error, high astigmatism), and when using trial lens, you should consider the vertex distance and the gap between overlapped lenses before prescription.

• Journal of Surface Science and Engineering
• /
• v.29 no.4
• /
• pp.261-267
• /
• 1996

The characteristics and adhesion strength of TiN layer deposited by D. C. magnetron sputtering were investigated. Three types of TiN layers were deposited on STS304 stainless steel. Scratch tests were performed to determine the effect of deposition temperature, the thickness of coated TiN layer and the titanium inter-layer on the adhesion strength. TiN multilayer with titanium inter-layer showed the highest critical load in the deposition temperature range of $25^{\circ}C$ to $300^{\circ}C$. Adhesion strength of TiN multilayer with titanium inter-layer was raised from 15N to 20N by raising deposition temperature from $25^{\circ}C$ to $400^{\circ}C$. Adhesion strength was raised from 18N to 38N by increasing the thickness of outer layer of TiN multilayer from 2.1 $\mu\textrm{m}$ to 9.5 $\mu\textrm{m}$.

• 전기의세계
• /
• v.18 no.5
• /
• pp.12-19
• /
• 1969

The sensitivity of transistorized d.c. amplifiers is mainly limited by drift at operating point caused by ambient temperature changes. A chopper-type transistorized amplifier is necessary to obtain a high sensitivity without recourse to drift compensation which requires the adjustment of several balancing controls. A chopper-stabilized system consisting of an electro-mechanical chopper for input and output and a high-gain a.c. amplifier is designed and analyzed. The gain of the a.c. amplifier, expressed as the ratio of voltages, is larger than 80db in the band of 50C/S - 100KC/S. The complete system gives an open-loop gain of 68db at direct current. The offset voltage is 20.mu.V referred in input and the voltage drift at the input is less than 10.mu.V/hr at 25.deg.C. This type of amplifier would be useful for the high-gain transistorized d.c. amplifier for analog computers. Also, due to the high input impedance, it is suitable for amplification of signals from wide range of source impedances.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1247-1254
• /
• 2018

We study the uncertainty stemming from different theoretical models in the spectroscopic factors extracted from experiments. We use three theoretical approaches, the distorted wave Born approximation (DWBA), the adiabatic distorted wave approximation (ADWA) and the continuum discretized coupled-channels method (CDCC), and analyze the $^{12}C(d,p)^{13}C$, $^{14}C(d,p)^{15}C$ reactions. We find that the uncertainty associated with the adopted theoretical models is less than 20%. We also investigate the contribution from the remnant term and observe that it gives less than 10% uncertainty. We finally make an attempt to explain the discrepancy in the spectroscopic factors of $^{17}C(\frac{3}{2}^+)$ between the ones extracted from experiments and from shell model calculations by analyzing the $^{16}C(d,p)^{17}C$ reaction.