• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.985-992
• /
• 2011

The 3D computational fluid dynamics (CFD) was performed in relation to the internal fluid characteristics and flow distribution for the development of the most optimal model in the complex post-disposal device. As it is expected that a channeling (drift) would be made by the semi-dry reactor due to the large difference in the flow distribution by the compartment in the bag filter, a structural improvement should be urgently made for more uniformed flow distribution in the bag filter. Three types of modifications such as i) changing the plenum shape, ii) orifice install in the exit part of cleaned gas, iii) increasing the plenum number were established. From the results of computational fluid dynamics, it was revealed that the changing of plenum shape and orifice install in the exit part of cleaned gas was more reasonable than the increasing the plenum number because of the difficulties of retrofit. The complex post-disposal device, modified and supplemented with this analysis, integrated the semi-dry reactor and the bag filter in a single body, so it follows that the improvement can make the device compact, save the installation area, save the operation fee, and management more convenient.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.493-510
• /
• 2014

From game consoles to TV and Hollywood films, 3D rendering technology is involved in various fields. Up until the late 90s, the computer image rendering method was rasterization that mainly used Phong Shading, and up until recently it was the go-to method for movies and film animation. In the 21st century, the quality provided by Ray Tracing and the development of Global Illumination was much more realistic and thus became popularized. However, despite its growing use in architectural rendering to the markets, Global Illumination in film animation and movies was limited due to its long render time. So, in this thesis, if one were to take the concept from each rendering method and consider it from a mathematical perspective, one could adapt the Ambient Occlusion's equation to the illumination loop equation used in rasterization. This algorithm modification has the capability to reflect the lighting of a diverse array of colors, like in Global Illumination, with a fast render time, as in rasterization, and the example RenderMan Shader is based upon this new algorithm. In conclusion, with Global Illumination's naturalistic lighting and rasterization's rendering speed, the combination of the best points of each is a new method with a short rendering time while producing good quality. I hope animations and films can benefit from this algorithm by the reduction of budget with an overall better quality output in VFX production.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.104-109
• /
• 1983

Gas chromatographic method for the analysis of phorate(0,0-diethyl S-ethyl-thiomethyl phosphorithioate) and its metabolites in soil and vegetables was studied by using a mixed phase column(10% DC-200+8% Reoplex-400+2% QF-1 on Gas Chrom Q, $1.8{\times}2mm$ i.d, borosilicate glass column). This column can separate completely phorate and its four metabolites except phoratoxon sulfoxide. Retention time of standard mixture ranged 1.8 to 16.1 minutes at column temperature programming from 130 to $200^{\circ}C$ at $5^{\circ}C/min$ and detector sensitivity was also very high(0.05 to 1.05ng). Recoveries from soil and vegetables untreated but fortified with phorate and its three major metabolites at 0.05 and 0.5ppm levels were above 90% for phorate, phorate sulfoxide and phorate sulfone while recovery of phoratoxon metabolite was about 84%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.89-96
• /
• 2008

This paper investigates the effect of blade deformation, caused by manufacturing inaccuracies, on the performance of a 2-stage axial steam turbine. A high fidelity 3D coordinate Measurement Machine has been employed to obtain the exact geometrical model of the blades. A Streamline Curvature solver was used to predict the overall performance of the turbine. During the manufacturing process of the casts and of the blades themselves, several types of errors can occur which lead to a different geometry from that envisaged by the designer. The main objective of this study is to investigate the effect of those errors on the performance of a 2-stage experimental axial steam turbine. A high fidelity measurement of the actual geometry of both stator and rotor blades has been carried out, using a 3D Coordinate Measurement Machine. The cross sections of the blades obtained by the measurement were compared with those produced by the design process to evaluate the change in blade inlet/exit angles. In addition, the geometrical deviations from the initial design have been subjected to a statistical study in order to locate the nature of the error. The actual(measured) model has been used as input into a Streamline Curvature solver to evaluate its performance. Finally, a comparison with the performance plots of the original geometry has been carried out. A measurable change of efficiency as well as in the total power delivered by the turbine was found. This suggests that the accumulated error caused during the manufacturing procedure plays a significant role in the overall performance of the machine by making it less efficient by more than 1%. Reverse engineering techniques are proposed to predict and alleviate these errors leading thereby to a final design of each stage with improved performance.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.348-355
• /
• 2024

A current source capable of stably supplying current as a measurement medium is required in order to measure and test important facilities that require large-scale measurement current, such as a control element drive mechanism control system(CEDMCS), in case of dismantling a nuclear power plant. However, it can provides only voltage power as a source, not current, although direct voltage controlled constant current source is essential to test major equipment. That kind of source is not available to supply stable constant current regardless of load variation. It is just voltage supplier. Developing current source is not easy other than voltage source. Very large-scale current source up to ampere class more than such ten times of normal current is inevitable to test above mentioned equipment. So, we developed large-scale current source which is controlled by input DC voltage and supplies constant stable current to object equipment according to this requirement. We measured and tested nuclear power plant equipment using given real site data for a long time and afforded long period load test, and then proved its validity and verification. The developed invetion will be used future installed important equipment measuring and testing.

• Journal of Sericultural and Entomological Science
• /
• v.14 no.2
• /
• pp.81-92
• /
• 1972

Studies on Pathogenicity of Nosema bombycis Naegeli are summarized as follows: 1. The mortality of the parents, Jam 103 and Jam 104, is remarkbly higher than that of the hybrid, Jam 103$\times$Jam 104, whereas there is no difference in the mortality between the parents. 3. In the mortality of the pathogen-concentration, it is increased in order of the following concentrations inoculated, 10$^{8}$ , 10$^{7}$ , 10$^{8}$ and 10$^{5}$ /ml. 3. In the mortality of each instar, it is high in order of 5th, 4th, 3rd, and 2nd instar. 4. In the interaction between the mortalities of the varieties and the concentrations, 1) The mortality shows no differences between the parents and the hybrid in the high concentration of 10$^{8}$ /ml. 2) The mortality of the hybrid is lower than that of the parents in the low concentration of 10$^{5}$ /ml, whereas no difference is found between the parents. 3) The interaction appears at the same level in the middle concentration of 10$^{6}$ /ml to the parents and of 10$^{7}$ /ml to the hybrid. 5. It was pointed out that active immunity depends upon the volume of antigen injection, immunizing period, and injection intervals. In this experiment, it is noticed that the optimum volume of injection is above 20ml and D is the best one of the four treatment (A.B.C.D.). 6. The immune sera indicate such a 12,800 high titer in the indirect method can be obtained from the D immunizing method. Silkworm tissues and N. bombycis spores show self-fluorescence, but it is able to distinguish it from the F.I.T.C. by using the U.V. filter. 7. The midgut epithelium is examined to be the first site of the tissues which are penetrated into and multiplied by the inoculation of the pathogen per os.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.1-7
• /
• 2001

This study was to test whether in vitro matured Hanwoo oocytes can be successfully cryopreserved by a new vitrification procedure using MVC method. For the vitrification, oocytes were pretreated in 10% ethylene glycol (EG10) for 5~10 min, exposed in EG30 for 30 sec, each oocyte was individually put on the inner wall of 0.25 $m\ell$ straw, and then straws were directly plunged into L$N_2$. Thawing was taken by 4-step procedures 〔1.0 M sucrose (MS), 0.5 MS, 0.25 MS, and 0.125 MS〕 at 37$^{\circ}C$. In vitro developmental capacity (survival, cleavage ($\geq$2-cell) and blastocyst rates) in vitrified group was no significant difference compared to that in other treatment groups (exposed; 100.0, 74.4, 32.3% and control; 100.0, 78.3, 36.3%): high mean percentage of oocytes (91.2%) was survived, 69.4% of them were cleaved and 27.9% of cleaved embryos were developed to blastocyst. Especially, after transfer of in vitro developed embryos in vitrified group, four of six recipient animals were pregnant and three of them were ongoing-pregnant by manual palpation at 250 days after transfer. This result demonstrates that MVC method is very appropriate freezing method for the Hanwoo in vitro matured oocytes and that ovum bank can be maintained efficiently by MVC cryopreservation method.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.22-47
• /
• 2014

This study was to understand the basic principles of the East Asian wooden structure system research and analysis. The Korea and China ancient architecture internal structure research that the combination of girders and crossbeams position. The ancient wooden structures of eastern Asian countries, Korea and China are not much different from each other in the principles of the wooden architecture structure, combining pillars, purlins and crossbeams. However, it seems that age-division, local-division, national-division differs in detail techniques. China ancient wooden structures combination of purlin and crossbeam, and So-seul Timber(Chinese name: Chashou叉手, Tuojiao 托脚) seems to show differences according to the age of the fulcrum position, detailed approach is also different according to various historical dynasty. Before in the 15th century, Purlin and Crossbeam are coupled to each other, but since the 15th century, seems to have developed a technique combined with each other Girder and Crossbeam and to prevent buckling of the Crossbeam cross-sectional area increased dramatically. For Tuojiao in China Tang-Wudai dynasty(A.D. 618~979), can see that saw the top position Girder and Tuojiao no direct coupling, can be seen as maintaining the safety of the material than the material of the inner wooden structures prevent buckling of the purlin. Korea ancient wooden structures of Goryeo dynasty(A.D. 918~1391), So-seul Timber(Chinese name Tuojiao) why do not to use the fashion? To use Purlin Lower backing material techniques to prevent buckling is a popular trend to stable can be thought of as a preferred way to maintain. I think that with universality beyond the local-division, national-division and the two countries since the 15th century of Korea and China ancient wooden structures detailed mechanism for the purlin buckling. In middle-late Chosen dynasty, The effect of Deotgeolyi- techniques and fleeting beams reduce the purlin buckling that reduces the load transmitted from purlin and crossbeam of how to reduce the load on the roof portion of the architecture fleeting beams used, which of craftsmanship of the Chosen Dynasty building can be referred to as another technique for preventing buckling purlin. This Korea and China ancient architecture purlin beam structure and material So-seul Timber study. Seems to be able to provide a basic research study to restore and designed the old wooden architectures.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.497-509
• /
• 1995

With socioeconomic development and change of esthetic recognition, the demand for orthodontic treatment and number of orthodontic patients has been increasing so rapidly. And frequency of malocclusion was changed. So this study was done in an attempt to provide an epidemiologic study so that we can accomodate their orthodontic needs adequately and to obtain the reliable quantitative information regarding the characteristics of orthodontic patients who visited Department of Orthodontics, Seoul National University Hospital from 1985 to 1994. Following results were obtained. 1. The total number of orthodontic patients of SNUDH during 1990-1994 increased in comparing with that of 1985-1989. And it showed that the number of annual patients was increasing trend. 2. The total number of female patients was 1.59 times as high as that of male. It showed that the annual percentage of female patients has been increasing and that of male patients has been decreasing. So demands for orthodontic treatment of malocclusion of female patients were higher than that of male patients. 3. Each total percentage of class I, class II div.1, class II div. 2 and class III was 35.98%, 14.00%, 1.74% and 48.28%. The annual percentage of class I group had been decreasing but it has increased at 1994. However that of Class III group had been increasing until 1991 but it has been decreasing. 4. Each percentage of less than 6 year-old group, D to 8 year-old group, 8 to 12 year-old group, 12 to 18 year-old group and more than 18 year-old group was 2.65%, 8.63%, 32.50%, 27.74% and 28.48%. Annual percentage of 12 to 18 year-old group ( middle & high school students group ) had been decreasing but it has been increasing. However 18 year-old group had been increasing but it has been decreasing. So entrance examination for college and university is an important factor to distribution of age group.

• Korean Journal of Pharmacognosy
• /
• v.7 no.3
• /
• pp.179-190
• /
• 1976

1. The Korean Acanthopanax genus includes 12 kinds consisting of 9 species and 3 forma. 2. The Korean Oga-pi which is on market sale has been used as bark for the medicinal purpose, and Oga-pi shall use Radicis Cortex. That is why it is basic rule that herbalogy shall use Radicis Cortex. 3. The origin of Oga-pi on sale is Acanthopanax sessiliflorum forma chungbunensis C.S. Yook. 4. $C_{HUNG}\;and\;N_AKAI'S}$ report on A. koreanum told us that there are brown hair on the mid-leaf junction, but in addition to it, our investigation was resulted in the fact that there are thorn along mid-rib sometimes. 5. 2 kinds of new forma are similar to A. sessiliflorum, but are different in the view-point of chemotaxonomy, compared with A. sessiliflorum. In its morphology, we can find some difference between 2 kinds of new forma and A. sessiliflorum. Our effort of examination on documents tell us that the all plants growing in the central part of our country is A. sessiliflorum forma chungbunensis C.S. Yook. The one which has thorn on both side among the plants collected in Mt. Dukyu, is called A. sessiliflorum forma nambunensis C.S. Yook. 6. A. sessiliflorum is growing in the southern part in Korea, and most Chungbu Oga-pi A. sessiliflorum forma chungbunensis in the central part of our country. For the convenience of our study, the key of Korean Acanthopanax plant is classified into, I-IV, as shown on the following items: I. No hair on both side of leaf A. Flower stalk is longer than petiole, and there are thorn under the petiole (5-7 stigma).${\cdots}A.\;sieboldianum$. B. Flower stalk is longer than petiole, or same length. The serration lie down, and the stem has short thorn (stigma is divided into 3 part).${\cdots\;\cdots}A.\;seoulense$ II. There are a lot of thorn or hair on back of leaf. A. A lot of thorn and hair on the vein of leaf back, and a number of small thorn on petiole.${\cdots}A.\;chiisanensis$. B. There are thorn on the vein of leaf back.${\cdots\;\cdots}A.\;sessiliflorum\;forma\;chungbunensis.$ III. There are hairs on both side of leaf. A. There are small hairs on the back of leaf.${\cdots\;\cdots}A.\;sessiliflorum.$ B. There are small hairs on both side of leaf.${\cdots\;\cdots}A.\;sessiliflorum\;f.\;nambunensis.$ C. There are thick hairs on junction of main vein on back of leaf.${\cdots\;\cdots}A.\;koreanum.$ D. There are brown hairs on vein of leaf back, and brown hairs on small petiole.${\cdots\;\cdots}A.\;rufinerve.$ E. There are shrunk hairs in grey-brown on back of leaf, and tense hairs on new branch (one stigma).${\cdots\;\cdots}A.\;divaricatum.$ IV. There are long thorn, just like needles, on the stem and petiole. A. Long needle grows on whole stem tensely, and long needles on petiole.${\cdots\;\cdots}A.\;senticosus.$ B. There are no needles, just like needles aid hairs on petiole, and needles grow on the stem thinly.${\cdots\;\cdots}A.\;asperatus.$ C. There are no needle on small brarch, leaf and inflorescence are larger than A. senticosus. ${\cdots\;\cdots}A.\;senticosus\;forma\;inermis.$.