• The Plant Pathology Journal
• /
• v.22 no.2
• /
• pp.155-160
• /
• 2006

A strain of Pepper mottle virus (PepMov) was isolated from chili pepper plants in Korea. In host range study, this virus, designated PepMoV-SNU1, shared most characteristics with PepMoV isolates reported previously. Thermal inactivation point ($45^{\circ}C\;to\;75^{\circ}C$) and dilution end point ($10^{-1}\;to\;10^{-4}$) of PepMoV-SNU1 showed differences depending on the propagation hosts. Cylindrical and pinwheel-shaped inclusions were always observed in pepper leaf tissues infected with the virus alone. Unexpectedly, a special structure of pinwheel shaped inclusion surrounded with unknown small spots was also observed in the leaf section when co-infected with a strain of pepper mild mottle virus. The partial sequence of coat protein gene and 3' untranslated region of PepMoV-SNU1 showed 98% identity with those of other PepMoV isolates. A primer pair derived from 3' end of the coat protein gene and poly A tail regions were designed. Optimal detection condition of PepMoV-SNU1 by RT-PCR was tested to determine appropriate annealing temperature and additional volumes of oligo-dT (18-mer), dNTP, and Taq polymerase. Under the optimized condition, an expected 500 Up PCR-product was detected in pepper leaves infected with PepMoV-SNU1 but not in healthy plants.

• Journal of the Korean Institute of Gas
• /
• v.18 no.2
• /
• pp.10-15
• /
• 2014

In this paper, the displacement and stress strength safeties have been presented for cylindrical hollow rollers of a wire saw machine. Using the finite element method, the hollow roller with Y-shaped shift and vertical columns between three tubes has been developed to analyze the displacement behavior and stress strength safeties. For the same diameter and length of hollow roller models with a different weight, the displacement behavior safety of Y-shaped shift column and vertical column models is heavily depending on the total length of a hollow roller, which is closely related to the bending moment of a hollow roller structure. But, the stress strength of a hollow roller is more influenced by the cross sectional area of a hollow roller for the similar weight. Thus, this paper recommends Y-shaped hollow roller for increasing the roller strength safety and decreasing a total roller weight.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1764-1769
• /
• 2014

Numerical investigations have been conducted on the junction that connect the multi-tubular section and the single shell section in order to evaluate applicability of hybrid sections in wind turbine towers instead of conventional single shell towers. Major characteristics in structural details include extension of multi-tubular member into shell end section, installation of wing stiffeners, and different layout of floor beams. Elastic and nonlinear incremental analyses were conducted to examine stress concentration patterns and ultimate behaviors, respectively. Based on evaluation of structural performance due to vertical and horizontal forces, it has been confirmed that installation of floor beams and wing stiffeners sensitively affect ultimate strength of global wind tower.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.3
• /
• pp.89-95
• /
• 1989

As most structures need all sided analysis, development of precise and ideal analytical techniques are required. In non-metric camera alone or metric and non-metric camera can be used for the purpose of measurement, the object will be analyzied economically and quickely. The purposes of this study are to suggest possibility of analysis of circular strip by means of Bundle Adjustment and to investigate efficiency of analytical method by combination of metric and non-metric camera. For these purposes, cylindrical structure was taken as the object and multiple convergent photographs changing ${\omega}$ and ${\phi}$, by which circular strip was formed, were analysed.

• Development and Reproduction
• /
• v.18 no.1
• /
• pp.25-31
• /
• 2014

This study was investigated spawning behavior, structure of egg masses and egg development in Aplysia kurodai inhabiting the coastal waters of Jeju Island, Korea. The mating and courtship behavior of A. kurodai occurred in the form of unilateral copulating with chain formation. In chain copulation, only the first animal acted as a female; the second and succeeding animals acted as males (sperm donors) to the animals in front and as females to the animals behind. The fertilized eggs were packaged in capsules that are embedded in jelly to form a cylindrical string called an egg masses. The number of capsule per cm of the egg masses was 55 to 60 capsules and each capsule within the egg masses held 15 to 25 eggs. After spawning, the egg masses were bright yellow or orange in color. This egg masses color not changed until embryos developed into trochophore stage. Thereafter, as embryo developed from trochophore stage to veliger stage the egg masses color became brownish. The fertilized eggs were spherical, with a diameter of approximately $80{\pm}1{\mu}m$ at spawning. At 5 to 6 days after spawning, the embryo developed into trochophore stage and began to rotate within the egg capsule. In the trochophore stage, the precursor of the velum, called the prototroch or prevelum, developed. At 10 days after spawning, the prevelum is transformed into the velum, and the trochophore developed into veliger stage. Between 10 to 15 days after spawning, the veligers broke out of the egg capsule, and hatched as free-swimming larvae.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1201-1208
• /
• 2009

Dome stretching tests and tension tests were performed to evaluate the formability of a copper alloy used for manufacturing the regenerative cooling chamber. The test specimens were prepared to investigate the effect of heat treatment and direction of specimens on the formability. The test results show that forming limit values are increased by the heat treatment of the material but the variation of the forming limit values by manufacturing direction is negligible compared to the heat treatment effect, and forming limit values are also different according to the test methods. These results indicate that the high temperature heat treatment of the material before bulging is a very important process to deform the inner cylindrical structure of the regenerative cooling chamber into a nozzle shape by the bulging process without necking or fracture and the test methods also have a great effect on a evaluation of the formability. The forming limit diagram obtained in this study would be utilized to the design of regenerative cooling chamber nozzles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.227-231
• /
• 2014

Underwater radiated noise is one of the vital factors in underwater weapon systems like submarine. A passive elastic mount is an effective reduction method for the vibration from a ship-board machinery transmitted to the hull which is radiated as noise outside the hull. A passive elastic mount shows the limitation on the vibration reduction and needs multi stage mounting system including double stage one to meet the required underwater radiated noise criteria. It is necessary for the multi stage mounting system to consider the large displacement in the underwater shock explosion. So it is difficult to apply the multi stage mounting system in submarine because of space limitation. Also recent navy sonar system are trying to have the capability to detect the ship-borne acoustic signals in the low frequency range. An alternative to the passive mount is an active mount with moving-coil type electromagnetic actuator based on a conventional rubber mount in the low frequency range. In the previous paper, 4 active mounts with moving-coil type electromagnetic actuator based on the rubber mount were installed on the hard floor of the facility, which means no consideration on the elastic foundation effect for the control of the active mounts was taken into account. In this study, an experimental performance analysis on the active mount was carried out using 4 active mounts installed on the cylindrical structure to investigate the elastic foundation effect.

• Imaging Science in Dentistry
• /
• v.43 no.4
• /
• pp.227-233
• /
• 2013

Purpose: This study was performed to analyze human maxillary and mandibular trabecular bone using the data acquired from micro-computed tomography (micro-CT), and to characterize the site-specific microstructures of trabeculae. Materials and Methods: Sixty-nine cylindrical bone specimens were prepared from the mandible and maxilla. They were divided into 5 groups by region: the anterior maxilla, posterior maxilla, anterior mandible, posterior mandible, and mandibular condyle. After the specimens were scanned using a micro-CT system, three-dimensional microstructural parameters such as the percent bone volume, bone specific surface, trabecular thickness, trabecular separation, trabecular number, structure model index, and degrees of anisotropy were analyzed. Results: Among the regions other than the condylar area, the anterior mandibular region showed the highest trabecular thickness and the lowest value for the bone specific surface. On the other hand, the posterior maxilla region showed the lowest trabecular thickness and the highest value for the bone specific surface. The degree of anisotropy was lowest at the anterior mandible. The condyle showed thinner trabeculae with a more anisotropic arrangement than the other mandibular regions. Conclusion: There were microstructural differences between the regions of the maxilla and mandible. These results suggested that different mechanisms of external force might exist at each site.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.35-40
• /
• 2005

There are many methods to reinforce the cylindrical structure for light weight design like skin-stringer and semi-monocoque. Isogrid is one of the reinforced structures to improve buckling load. Isogrid has many advantages for complex load case, internal pressure and concentrated load.In this paper, compressive buckling test and non-linear FE analysis of the isogrid panel are described. Diameter of panel is 2.4m and thickness of plate is 11.43mm. The angle which the panel accomplish is about 70 degrees and, its height is about 660mm. Local buckling, global buckling and variation of stiffness after local buckling were observed during buckling test of the panel. MSC/MARC is used for non-linear FE analysis. When analysis, initial imperfection of panel which occurred during plastic forming is considered. The results of analysis for buckling mode and buckling load have good agreements with test.

• The Korean Journal of Malacology
• /
• v.27 no.1
• /
• pp.55-65
• /
• 2011

Some characteristics of germ cell differntiations during spermiogenesis and mature sperm ultrastructure in male Phacosoma japonicus were investigated by transmission electron microscope observations. The morphology of the spermatozoon of this species has a primitive type and is similar to those of other species in the subclass Heterodonta. Morphologies of the sperm nucleus and the acrosome of this species are the cylindrical type and cap shape, respectively. The spermatozoon is approximately 45-50 ${\mu}m$ in length, including a long curved sperm nucleus (about $3.70{\mu}m$ long with 45 $^{\circ}$ of the angle of the nucleus, an acrosome (about $0.55{\mu}m$ in length), and tail flagellum (about 42-$47{\mu}m$)The axoneme of the sperm tail shows a 9+2 structure. As some characteristics of the acrosomal vesicle structures, the basal and lateral parts of basal rings show electron opaque part (region), while the anterior apex part of the acrosomal vesicle shows electron lucent part (region). These characteristics of the acrosomal vesicle were found in the family Veneridae and other several families in the subclass Heterodonta. These common characteristics of the acrosomal vesicle in the subclass Heterodonta can be used for phylogenetic and systematic analysis as a taxonomic key or a significant tool. The number of mitochondria in the sperm midpiece of this species are four, as one of common characteristics appear in most species in the family Veneridae and other families in the subclass Heterodonta. However, exceptionally, only three species in Veneridae of the subclass Heterodonta contain 5 mitochondria. The number of mitochondria in the sperm midpiece can be used for the taxonomic analysis of the family or superfamily levels as a systematic key or tools.