• Tribology and Lubricants
• /
• 제21권1호
• /
• pp.39-45
• /
• 2005

Investigation of the mass effect on the journal traces in the clearance of engine bearing has been performed for better design of mass distribution of crank system components such as crank pin, piston, con-rod, balance weight, crank throw weight, etc. as well as for better oil reaction behaviors to the applied forces from the cylinder pressures on the bearing. In this preliminary study, crank pin traces in the engine bearing clearance are computed by varying the equivalent magnitude of crank pin mass that includes the masses of crank pin, piston, con-rod. etc.. while most previous studies regarding journal traces in the bearing clearance neglect the inertia effects of crank pin mass. Although the inertia effect of pill mass is negligibly small compared to viscous force by ${\pi}bearing$ theory, it is found that it gives a great amount of influences on the journal traces in full bearing computation $(2\pi\;bearing\;theory)$ under the dynamic loading conditions.

• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.149-156
• /
• 2000

해성점토를 이용하여 준설매립한 부지의 장기적인 침하거동을 규명하기 위하여 실린더와 대형토조를 이용하여 침강.자중압밀시험을 수행하였으며, 준설매립단지에 자동무선계측시스템을 설치하여 매립부지의 층별침하량과 간극수압의 변화를 계측하였다. 이를 이용하여 준설매립 공정에 따른 매립지층의 침하거동을 분석하고 유한변형률 압밀이론을 이용한 수치해석 결과와 비교하였다. 침하거동 분석결과, 불연속 준설매립공정으로 인하여 매립지층의 분리 현상이 발생하였고 지층별 침하거동이 상이하게 나타났다.

• 수산해양기술연구
• /
• 제28권1호
• /
• pp.93-103
• /
• 1992

The hydrodynamic interaction characteristics between multiple floating bodies of semisubmersible type are examined for presenting the basic data for the design of huge offshore structures supported by a large number of the floating bodies in waves. The numerical approach is based on combination of a three-dimensional source distribution method and interaction theory which is exact within the context of linear potential theory. The method is applicable to an arbitrary number of three-dimensional bodies having any individual body geometries and geometrical arrangement with the restriction that the circumscribed, bottom-mounted, imaginary vertical cylinder for each body does not contain any part of the other body. The validity of this procedure was verified by comparing with numerical results obtained in the literature.

• KCI Concrete Journal
• /
• 제12권2호
• /
• pp.31-43
• /
• 2000

The extensive usage of pretensioned prestressed concrete component in modem construe- tion as structural members mandates precise understanding of its mechanism. Especially, an adequate transfer of prestressing force from steel tendons to concrete around the end regions of the member is a critical issue. Due to the importance of the topic, several investigators have formulated equations modeling the transfer bond length based on various bonding mechanism between steel and concrete. However, the existing models are still inadequate in predicting the bond development in pretensioned prestressed concrete members. Therefore, this study presents a model of transfer bond length based on rational theory that can simulate experimental results. The model is developed into solid mechanics based structural analysis computer program. The program is validated by comparing the analysis results with experimental results of bond stress distribution, concrete strain profiles, and transfer length in pretensioned prestressed concrete members. The proposed analytical procedure in this study can be utilized as a useful tool for realistic evaluation of transfer length in pretensioned prestressed concrete members.

• 대한조선학회지
• /
• 제20권2호
• /
• pp.27-36
• /
• 1983

This paper presents numerical results of the added mass and damping coefficients of vertical axisymmetric bodies on or under the free surface. Also computed are the excitation forces on these bodies due to an incident regular wave system. The numerical scheme employs a localized finite-element method, which is based on the theory of the calculus of variations. The excitation forces and moments on a submerged half-spheroid lying on the bottom are computed and compared with the results obtained by others. he agreement is good. Several specific types of floating vertical axisymmetric platforms are considered for ten different wave lengths, in connection with the design of an ocean-thermal-energy converter platform. The added mass and damping coefficient, as well as the excitations, are presented. It is shown that simple strip theory gives a good approximation of the sway(and pitch) added mass for a disc platform having a long circular cylinder.

• Geomechanics and Engineering
• /
• 제35권2호
• /
• pp.181-194
• /
• 2023

The primary objective of this study is to examine the influence of geometry on the stability characteristics of cylindrical microstructures. This investigation entails a stability analysis of a bi-directional functionally graded (BD-FG) cylindrical imperfect concrete beam, focusing on the impact of geometry. Both the first-order shear deformation beam theory and the modified coupled stress theory are employed to explore the buckling and dynamic behaviors of the structure. The cylinder-shaped imperfect beam is constructed using a porosity-dependent functionally graded (FG) concrete material, wherein diverse porosity voids and material distributions are incorporated along the radial axis of the beam. The radius functions are considered in both uniform and nonuniform variations, reflecting their alterations along the length of the beam. The combination of these characteristics leads to the creation of BD-FG configurations. In order to enable the assessment of stability using energy principles, a numerical technique is utilized to formulate the equations for partial derivatives (PDEs).

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권5호
• /
• pp.653-660
• /
• 2010

선미관 베어링은 프로펠러가 회전할 시 슬립을 방지하기 위하여 충분한 간섭량을 가지고 캐스팅에 강제 압입되어야 한다. 선미관 베어링을 캐스팅에 강제 압입 시에 필요한 힘을 계산할 때 사용되어지는 공식은 업체별로 각각 다르며, 계산 시 사용되어지는 요소들의 값도 상이하다. 이에 따라 조선소에서 선미관 베어링 강제 압입력을 계산할 때에는 업체별로 제시된 공식과 재질에 따라 고려되어지는 요소들의 값을 사용하지만 간섭량은 조선소의 경험에 기반한 값을 표준으로 사용하고 있다. 본 논문은 강제 압입법에 의한 시공시에 선미관 베어링에 사용되어지는 피팅관계식을 검토하여 선미관 베어링 업체별로 제시되어지는 값을 기반으로 한 결과를 실제 값과 비교하였다. 그 결과 업체별로 제시한 식이 두께가 두꺼운 실린더 이론을 이용하였음을 알 수 있었다. 특히 J사 및 B사의 경우에는 K사와는 달리 두께가 두꺼운 실린더 이론을 근간으로 하였지만, 두께가 얇은 실린더의 경우에도 사용할 수 있도록 변형하여 사용하고 있음을 알 수 있었다.

• Tribology and Lubricants
• /
• 제22권4호
• /
• pp.211-217
• /
• 2006

Ring and groove wear may not be a problem in most current automotive engines. However, a small change in ring face and groove geometry can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face, ring groove and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Being based on the calculation of gas flow amount by the theory of piston ring dynamics and gas flow, and the calculation of oil film thickness and friction force by the analysis of piston ring lubrication, the calculation theory of oil amount through top ring gap into combustion chamber will be set. This is estimated as engine oil consumption. Furthermore, the wear theories of ring, groove and cylinder bore are included. Then the each amount of wear is to be obtained. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. Next, the calculated amount of oil consumption and wear are compared with the guideline of each part's wear and oil consumption. So, the timing of part repair and engine life cycle can be predicted in advance without performing engine durability test. The wear data of rings and grooves are obtained from three engines before and after engine durability test. The calculated wear data of each part are turn out to be at the lower bound of aver-aged test values or a little below.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1598-1608
• /
• 1997

Based on the application of te theory of conjugate approximations and the Loubignac's iterative method in a local region, a method to improve the stress filed in a displacement-formulated finite element solution has been proposed. The validity of the proposed method has been tested through two examples : a thick cylinder under internal pressure loading and an infinite plate with a central circular hole subjected to uniaxial tension. As a result of analysis of the examples, it was found that the stress field obtained for the local region model by the proposed method approximates well for the whole domain model. In addition, it was found that because of a significant decrease in the computing time to obtain the improved stress field, the proposed method is efficient and useful for the detailed stress analysis in local regions.

• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.735-748
• /
• 2018

In this study, the semi-analytical finite strip method is adopted to examine the free vibration of cylindrical shells made up of functionally graded material. The properties of functionally graded shells are assumed to be temperature-dependent and vary continuously in the thickness direction according to a simple power law distribution in terms of the volume fraction of ceramic and metal. The material properties of the shells and stiffeners are assumed to be continuously graded in the thickness direction. Theoretical formulations based on the smeared stiffeners technique and the classical shell theory with first-order shear deformation theory which accounts for through thickness shear flexibility are employed. The finite strip method is applied to five different shell theories, namely, Donnell, Reissner, Sanders, Novozhilov, and Teng. The approximate procedure is compared favorably with three-dimensional finite elements. Finally, a detailed numerical study is carried out to bring out the effects of power-law index of the functional graded material, stiffeners, and geometry of the shells on the difference between various shell theories. Finally, the importance of choosing the shell theory in simulating the functionally graded cylindrical shells is addressed.