• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.343-351
• /
• 2011

We prepared polyurethane foam/cloisite30B/phosphates composites and characterized their rise time, density, cell morphology, and thermal properties. The composites were synthesized with polyadipatediol-cloisite30B composite (f=2.0), polyether-polyol (f=4.6), polymeric 4,4-diphenyl methane diisocyanate (f=2.5), and D-580 (phenyl polyoxyalkenyl phosphate). As a blowing agent, cyclopentane and distilled water were used at various concentrations of D-580 from 0 to 2.81 wt%. The rise times of PUF/Closite30B/Phosphate composites blown with distilled water were faster than those blown with cyclopentane by 30%. The composites blown with cyclopentane had spherical-shape cells and the cell diameter was decreased with increasing D-580 wt%. While $T_g$ of the composites blown with cyclopentane linearly decreased with increasing the D-580 content, the $T_g$ of the composites blown with distilled water increased with the D-580 content. All PUF/Closite30B/Phosphate composites began to decompose from $250^{\circ}C$. The composites blown with cyclopentane showed the second thermal decomposition at temperatures higher than $500^{\circ}C$. The thermal stability of all composites increased with the D-580 content. The effect of D-580 on the thermal stability of the composites was measured higher at the composites blown with distilled water.

• YAKHAK HOEJI
• /
• v.34 no.5
• /
• pp.287-290
• /
• 1990

An efficient stereoselective synthetic route to carbocycle is described. 1,1,2-Trisubstituted cyclopentane was synthesized from allylic carbonate by Pd(0) catalyzed cyclization.

• YAKHAK HOEJI
• /
• v.39 no.1
• /
• pp.41-47
• /
• 1995

An efficient and stereoselective synthetic route to the trisubstituted hydroxy cyclopentane as an useful synthetic intermediate for carbaprostacyclin is described. Pd(0)-mediated intramolecular alkylation of allylic carbonate has been employed as a key reaction.

• YAKHAK HOEJI
• /
• v.37 no.3
• /
• pp.290-294
• /
• 1993

An efficient synthetic route to the trisubstituted cyclopentane as an useful synthetic intrermediate for carbaprostacyclin is described. Ireland Claisen rearrangement of a hydroxylactone has been employed as a key reaction.

• International Journal of Safety
• /
• v.1 no.1
• /
• pp.47-51
• /
• 2002

This study was performed by measuring the minimum ignition temperature of polyurethane form recovered from the recycling process of the end-of-life home appliances. The critical ignition temperature of polyurethane form was lower as the size of the sample vessel was increased, and that of polyurethane form using cyclopentane as the forming agent was relatively lower than the polyurethane form using CFC and the combustion of cyclopentane-polyurethane form occurred fiercely. It is considered that the recycling process of end-of-life home appliances using cyclopentane-polyurethane form as the insulator would require a special fire and dust explosion prevention measures since there exists a high potential hazard of fire and dust explosion during crushing and storage processes.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.2
• /
• pp.179-185
• /
• 1999

The effect of blowing agents and inner temperature on the machanical properties of the flexible polyurethane foams were investigated. In the study used that chemical blowing agents is $H_2O$ and support blowing agents. CFC-11, HCFC-114b, dichloromethane, n-penthane, iso-pentane, cyclopentane. The flexible polyurethane foams were foamed by the density of $0.015{\pm}0.002g/cm^3$ and $0.024{\pm}0.002g/cm^3$ which were used in mechanical properties measurements. Inner temperature was measure as long as the preparation of the flexible polyurethane foams of each blowing agents. The density, tensile strength, elongation, tear strength, compression strength and compression set were measured after 48 hours hardening. The result of the study was optimized dichloromethane and cyclopentane at the support blowing agents.

• Proceedings of the PSK Conference
• /
• 2001.10a
• /
• pp.230.2-230.2
• /
• 2001

• Safety and Health at Work
• /
• v.2 no.1
• /
• pp.17-25
• /
• 2011

Objectives: In this study, the in vitro mammalian chromosomal aberration (CA) assay was conducted to gain additional information concerning the hazards associated with the use of cyclopentane and ammonium nitrate. While these two chemicals had already been tested by many methods, they had not been studied in the CA test. Methods: The assay was performed using the ovarian infantile cell (CHO-K1 cell), by the direct method (-S9) and by the metabolic activated method (+S9 mix). Results: Using the direct method, the 7 dosages in a 48 hour treatment group did not show that the frequency of CA is proportion to the dosage addition. The frequency of CA is not proportion to the dosage addition for a 6 hour treatment using the metabolic activated method. Conclusion: From these findings, it was decided that the 2 chemicals do not induce chromosomal aberrations under the tested conditions.

• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.30-34
• /
• 2016

In this study, we synthesized a phenol foam using a resol-type phenol resin as a research for replacing the polyurethane foam used as an insulator for cryogenic temperature, such as LNG or LPG. Foaming agents for synthesizing a phenolic foam was used HCFC-141b or n-pentane, cyclopentane, n-hexane, cyclohexane and a mixture of HFC-365mfc and HFC-227ea respectively. Cyclohexane as a blowing agent exhibited the most superior insulating performance and compressive strength. The heat resistance of polyurethane foam and phenolic foam blown by the cyclohexane, was higher than polyurethane foam.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.200-205
• /
• 1990

Chemically modified electrodes(CMEs), based on 2-imino-1-cyclopentane-dithiocarboxylic acid (icdc) containing carbon paste, have been characterized using cyclic voltammetric techniques. Ag(I) was chemically deposited on the CMEs, and voltammograms were obtained with the electrode in a separate buffer solution. The CME surface can be regenerated with exposure to acid and reused for deposition. In 10 deposition/measurement/regenerate cycles, the linear response have been reproduced up to $1{\times}10^{-6}$ M in linear sweep voltammetry and 1${\times}$10-8 M in differential pulse voltammetry with relative standard deviation of 5.2% and 12.4%, respectiveiy. The sensitivity increased with deposition time and scanning rate, and detection limit was $1{\times}10^{-7}M\;and\;1{\times}10^{-9}M$ at 20 minutes deposition in the linear sweep voltammetry and differential pulse voltammetry, respectively. The presence of some metal ions does not influence the silver ion response. Satisfactory results were obtained for the analysis of the silver ion for a variety of reference materials without interference of Hg ion at the condition of pH = 5-6.