• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.50-53
• /
• 2018

Cyclic measurement system using relay circuit for organic light emitting diode (OLED) was demonstrated. The OLED characterization such as current-voltage, impedance, and capacitance-voltage is performed in sequence, repetitively and automatically under full control of the personnel computer (PC) without changing the connection of cables. Owing to in situ degradation by cyclic measurement, the time dependence of the data can give good information on the reliability factor of the OLED devices. Therefore, both performance and reliability of the OLEDs can be evaluated, with no manual operation during the entire process.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1857-1859
• /
• 2007

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1373-1380
• /
• 1992

본 연구에서는 전보에서 실험역학적으로 도출한 .DELTA.A가 재료 및 하중크기에 의존하는 점에 착안하여, SNC631-A, SNC631-B, S45C, A12024-T3 및 A17075-T6 등 5종 류 재료를 응력비 R=0.1, 0.3, 0.5에서 피로크랙전파속도시험을 실시하고, 피로크랙팁 의 국소피로변형률장의 상태를 정량적으로 나타낼 수 있는 피로변형률확대계수 .DELTA.A(m, P)를 이용하여 크랙전파속도 da/dN을 통일적으로 평가하고, 그 결과의 유용성을 명백 히 하였다.

• 지질공학
• /
• 제8권3호
• /
• pp.275-284
• /
• 1998

포천 화강암에 피로하중을 가할 때 암석의 변형 거동과 피로하중에 의해서 생성되는 미세균열의 발달특성을 초음파 속도측정 및 차분변형율 분석을 통하여 연구하였다. 미세균열은 피로하중이 가해지는 방향과 평행하게 생성되며, 피로하중이 가해지는 초기에는 기존의 미세균열이 전파되면서 생성된다. 새로운 미세균열은 피로파괴횟수의 약 1/8-l/6 이상의 지난 후 생성되기 시작한다. 초음파 속도 측정, 차분변형율 분석 및 영구변형 측정은 암석내의 미세균열 발달을 잘 지시한다. 그러나 각 방법에 의하여 규명된 미세균열의 발달상태는 약간의 차이를 보여, 미세균열의 발달을 정량적으로 규명하기 위해서는 각 방법에 의하여 측정된 결과를 종합하여 해석하여야 할 것으로 판단된다. 80% 피로하중 수준에서 초기에 발달하는 미세균열은 70% 하중수준에 비하여 2배 정도로 높아서 하중수준이 커질수록 초기에 발달하는 미세균열의 량은 많아질것으로 판단된다. 그러나 파괴 직전의 시료에 발달한 미세균열의 량은 암석 부피의 약 0.3% 정도로, 포천화강암의 경우 부피의 0.3% 정도의 미세균열이 발달하면 암석이 파괴에 도달하는 것으로 판단된다.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.96-101
• /
• 1998

J-R curve tests were performed on 1T compact specimens of SA516 Gr. 70 carbon steels under reverse cyclic loading. A Direct-Current Potential Drop (DCPD) method, one of the nondestructive techniques to detect flaw of structure, is being increasingly used for monitoring crack initiation and stable crack growth in typical fracture mechanics specimens for J-R testing. In many aspects this method is simpler than the unloading compliance method. The objective of this paper is to evaluate the J-R Curve according to the crack length measurement techniques under reverse cyclic loading. In order to prove the reliability and repeatability of the DCPD method, the crack length measured by using DCPD method was compared to one determined from unloading compliance. Consequently, this DCPD method correlated well with J-R curves and crack extension measurements determined from unloading compliance method.

• 오토저널
• /
• 제14권3호
• /
• pp.90-101
• /
• 1992

An experimental study was carried out to investigate the characteristics of cyclic variability of combustion in a single cylinder spark ignition engine. Cylinder pressure of 240 consecutive cycles were measured for various engine operating conditions. From these data, a thermody-n amic analysis was performed for the typical cases in order to identify the cause and effect re -lation of the cyclic variation. In determining the number of cycles required for estimating the coefficient of variation of IMEP and so on, the oprating conditions must be cosidered to fit the objective of the analysis. It is thought that the variation in early flame stage is amplified through the flame propagation and results in the phase change between pressure and volume, which can be the major reason of cyclic variation of IMEP in case of lean operation.

• 대한기계학회논문집A
• /
• 제26권3호
• /
• pp.537-543
• /
• 2002

This paper examines a new in-process measurement system for the measurement of micro-defects on the surfaces of brittle materials by using the AFM (Atomic Force Microscopy). A new AFM scanning stage that can also perform nano-scale bending of the sample was developed by adding a bending unit to a commercially available AFM scanner. The bending unit consists of a PZT actuator and sample holder, and can perform static and cyclic three-point bending. The true bending displacement of the bending unit is approximately 1.8mm when 80 volts are applied to the PZT actuator. The frequency response of the bending unit and the stress on the sample were also analyzed, both theoretically and experimentally. Potential surface defects of the sample were successfully detected by this measurement system. It was confirmed that the number of micro-defects on a scratched surface increases when the surface is subjected to a cyclic bending load.

• Steel and Composite Structures
• /
• 제5권5호
• /
• pp.359-374
• /
• 2005

This paper presents the experimental and theoretical results of the viscoplastic response and collapse of 316L stainless steel tubes subjected to cyclic bending. The tube bending machine and curvature-ovalization measurement apparatus, which was designed by Pan et al. (1998), were used for conducting the cyclic curvature-controlled experiment. Three different curvature-rates were controlled to highlight the characteristic of viscoplastic response and collapse. Next, the endochronic theory and the principle of virtual work were used to simulate the viscoplastic response of 316L stainless steel tubes under cyclic bending. In addition, a proposed theoretical formulation (Lee and Pan 2001) was used to simulate the relationship between the controlled cyclic curvature and the number of cycles to produce buckling under cyclic bending at different curvature-rates (viscoplastic collapse). It has been shown that the theoretical simulations of the response and collapse correlate well with the experimental data.

• 센서학회지
• /
• 제30권6호
• /
• pp.384-387
• /
• 2021

Cyclic voltammetry (CV) is a powerful electrochemical measurement technique that can determine redoxable substances in a solution. The advantage of CV is that we can observe redox behavior over a wide potential range in a short time. Because of its practicality and versatility, CV is used not only in electrochemistry but also in various fields of chemistry, such as inorganic chemistry, organic chemistry, and biochemistry. As technology advances and the popularity of CV grows, the need for trained electrochemists also increases. However, most students do not receive formal training in these technologies as part of their curriculum. There are few concise and accessible resources for learning CV. Therefore, this manuscript provides a brief introduction to cyclic voltammetry to aid readers in collecting and interpreting useful data from cyclic voltammograms.

• 소성∙가공
• /
• 제26권1호
• /
• pp.41-47
• /
• 2017

Cyclic behavior of advanced high strength steel sheets was measured using an inverse-optimization approach with pre-straining and bending. First, tensile specimens were pre-strained, and three-point bending was conducted for the pre-strained specimens. By using the inverse finite element optimization, the combined isotropic-kinematic hardening parameters that minimize the error between the measured and predicted bending force-displacement curves. The measured cyclic behavior agreed well with the cyclic behavior measured by sheet tension-compression test, which confirms the validity of the measuring procedure based on inverse optimization.