• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.275-284
• /
• 1991

최근 압력용기, 고압배관, LNG Tank 및 선체등의 구조물 파괴에 대한 안전성을 보증하기 위하여, 구조부재의 표면결함에 대한 균열성장 거동을 파악하는 것이 중요한 과제중에 하나라고 인식되어지고 있다. 본 연구에서는 단일 및 복수표면 결함의 피로균열 성장을 바탕으로 표면에서 관통되기까지의 균열성장 수명의 추정등 실질적이고 일반적인 문제들을 해석할려고 시도하였다. 또한, 복수균열 문제에 적용하기 위하여 복수 언더컷의 합체진전현상을 검토하였으며 단일 언더컷과 복수 언더컷의 전파특성이 유사함을 밝혔다.

• 한국철도학회논문집
• /
• 제16권2호
• /
• pp.93-98
• /
• 2013

Railway system is today the most efficient way for transportation in many cases in several forms of application. Yet, wear phenomenon, profile evolution, fatigue, fracture, derailment are the major worries (financial and safety) in this system which force significant direct and indirect maintenance costs. To improve the cyclic maintenance procedures and the safety issues, it can be very satisfactory to be informed of the state of wheel/rail interaction with mileage. In present paper, an investigation of the behavior of the shear stresses by logged distance is approached, by implementing the field measurement procedure, in order to determine the real conduct of the most important cause of defects in wheel/rail contact, shear stress. The results coming from a simulation procedure indicate that the amounts of shear stresses are still in high-magnitudes when the wheel and rail are completely worn; even though in simulation based on the laboratory measurements of profile evolutions, the stresses become significantly reduced by logged distance.

• Steel and Composite Structures
• /
• 제2권1호
• /
• pp.67-84
• /
• 2002

Traffic decks of steel or composite motorway bridges sometimes provide the opportunity of using the composite action between an existing steel deck and a reinforced concrete plate (RC plate) in the process of rehabilitation, i.e., to increase the load-carrying capacity of the deck for concentrated traffic loads. The steel decks may be orthotropic decks or also unstiffened steel plates, which during the rehabilitation are connected with the RC plate by shear studs, such developing an improved local load distribution by the joint behaviour of the two plate elements. Investigations carried out, both experimentally and numerically, were performed in order to quantitatively assess the combined static behaviour and to qualitatively verify the usability of the structure for dynamic loading. The paper reports on the testing, the numerical simulation as well as the comparison of the results. Conclusions drawn for practical design indicated that the static behaviour of these structures may be very efficient and can also be analysed numerically. Further, the results gave evidence of a highly robust behaviour under fatigue equivalent cyclic traffic loading.

• International Journal of Railway
• /
• 제1권3호
• /
• pp.106-112
• /
• 2008

Rolling-sliding, cyclic contact of wheel and rail progressively alters the microstructure of the contacting steels, eventually leading to micro-scale crack initiation, wear and macro-scale crack growth in the railhead. Relating the microstructural changes to subsequent wear and cracking is being accomplished through modelling at three spatial scales: (i) bulk material (ii) multi-grain and (iii) sub-grain. The models incorporate detailed information from metallurgical examinations of used rails and tested rail material. The initial 2-dimensional models representing the rail material are being further developed into 3-dimensional models. Modelling is taking account of thermal effects, and traffic patterns to which the rails are exposed.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1335-1342
• /
• 1988

본 연구에서는 일반적인 구조물에 가장 많이 사용되는 연강박판재(SM12C)가 반복인장하중을 받았을 경우, 즉 이 재료가 프리응력과 프리변형을 받았을 때 시간의 경과에 따르는 경도, 항복강도 및 가공경화지수의 변화를 살펴보았다. 이와 같은 실 험을 통하여 재료가 서서히 안정화되어가는 상태를 왁인하였으며 이를 기초로 하여 레 지듀얼강도(residual strength)와 피로크랙진전속도의 거동을 체계적으로 구명하여 이 연강박판재의 구조물의 안전사용에 기여하도록 하는데 그 목적을 두었다. 아울러 프 리응력 및 프리변형을 받았을 때의 연강박판재의 기계적 성질의 변화를 Taylor의 가공 경화이론에 대응시켜 검토하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.842-846
• /
• 2005

A brake disk and a pad are important parts that affect the braking stability of a railway vehicle. Especially, because a brake disk stops the vehicle using conversion of the kinetic energy to frictional energy, thermal fatigue cracks are generated by the cyclic thermal load, as frictional heat, on a frictional surface and these cracks cause the fracture of a brake disk. Therefore, many researches for the thermal stress must be performed to improve the efficiency of brake disk and ensure the braking stability. In this study, we performed the thermal stress analysis for a ventilated brake disk with 3-D analysis model. For that, we simplified the shape of a ventilated hole to minimize problems that could be occurred in analysis process. Thermal stress analysis was performed in case that pressure distributions on a frictional surface is constant and is not. To determine pressure distributions of irregular case, pressure distribution analysis for a frictional surface was carried out. Finally using the results that were obtained through pressure distribution analysis, we carried out thermal stress analysis of each case and investigated the results of thermal stress analysis.

• 한국재난정보학회 논문집
• /
• 제14권4호
• /
• pp.492-500
• /
• 2018

연구목적: 본 논문에서는 이와 같은 배경을 근거로 충격하중 재하시 신소재 섬유로 보강한 콘크리트 슬래브 거동을 연구하는 것을 주 목적으로 알루미늄 섬유를 이용한 AFRP로 보강한 콘크리트 슬래브 중앙의 강재를 자유낙하 시켰을 때 충격실험을 검토하고자 한다. 연구결과: 신소재를 콘크리트 부재의 보강재로 이용하는 연구는 정적 하중하에서 휨 및 전단에 관한 연구나 반복하중 하에서 피로하중에 관한 연구와 PC 보에서의 적용에 관한 연구 등이 많이 보고 되고 있다. 결론: 신소재를 콘크리트 부재의 보강근으로 이용하는 연구의 일환으로 본 논문에서는 알루미늄 섬유로 보강된 조립상 AFRP 로트를 이용한 콘크리트 슬래브를 설치하여 동적거동에 대해서 실험을 실시하였다.

• Steel and Composite Structures
• /
• 제39권4호
• /
• pp.353-366
• /
• 2021

Cored moment resisting stub column (CMSC) was previously developed by the features of adopting a core segment which remains mostly elastic and reduced column section (RCS) details around the ends to from a stable hysteretic behavior with large post-yield stiffness and considerable ductility. Several full-scale CMSC components with various length proportions of the RCSs with respect to overall lengths have been experimentally investigated through both far-field and near-fault cyclic loadings followed by fatigue tests. Test results verified that the proposed CMSC provided very ductile hysteretic responses with no strength degradation even beyond the occurrence of the local buckling at the side-segments. The effect of RCS lengths on the seismic performance of the CMSC was verified to relate with the levels of the deformation concentration at the member ends, the local buckling behavior and overall ductility. Estimation equations were established to notionally calculate the first-yield and ultimate strengths of the CMSC and validated by the measured responses. A numerical model of the CMSC was developed to accurately capture the hysteretic performance of the specimens, and was adopted to clarify the effect of the surrounding frame and to perform a parametric study to develop the estimation of the elastic stiffness.

• Structural Engineering and Mechanics
• /
• 제84권6호
• /
• pp.823-829
• /
• 2022

This study considered the experimental parameters (Nano-graphene oxide reinforced polycarbonate, GFRP) under low-velocity impact load and vibration analysis. The effect of nano-graphene oxide (NGO) on a polycarbonate-based composite was studied. Two test procedures were adopted to obtain experimental results, vibration analysis. The mechanical tests were performed on damaged and non-damaged specimens to determine the damaging effect on the composite specimens. After the test was carried out, the effect of NGO was measured and damping factors were ascertained experimentally. 0. 2 wt% NGO was determined as the optimum amount that best affected the Vibration Analysis. The experiments revealed that the composite's damping properties were increased by adding the nanoparticles to 0.25 wt% and decreased slightly for the specimens with the highest nanoparticles content. Cyclic sinus loading was applied at a frequency of 3.5 Hz. This paper study the frequency effect of 3.5khz frequency damage on mechanical results. Found that high frequency will worthlessly affect the fatigue life in NGO/polycarbonate composite. In 3.5 Hz frequency, it was chosen to decrease the heat by frequency. Transmission electron microscopy (TEM) micrographs were used to investigate the distribution of NGO on the polycarbonate matrix and revealed a homogeneous mixture of nano-composites and strong bonding between NGO and the polycarbonate which increased the damping properties and decreased vibration. Finally, experimental modal analysis was conducted after the high-velocity impact damage process to investigate the defect on the NGO polycarbonate composites.

• 콘크리트학회논문집
• /
• 제25권5호
• /
• pp.517-528
• /
• 2013

모듈러 기술은 자동차, 플랜트, 조선산업 분야에서 이미 오래전부터 적용해 오던 기술로, 최근 교량 분야에도 적용되고 있다. 모듈러교량은 부재별 세부설계 과정이 생략되고, 모듈별로 표준화 된다는 점에서 기존의 조립식교량과는 차별화 된다. 거더형식 프리캐스트 모듈러교량은 단순지지 교량 형식으로 개발되었으며, 다경간 교량에 적용할 경우 단순지지 교량 형식의 모듈러교량을 연속화하는 방법으로 적용할 수 있다. 거더형식 프리캐스트 모듈러교량의 연속화는 시공이 간편하고 급속시공에 적합한 연결슬래브를 적용하는 방법으로 이루어진다. 연결슬래브는 1950년부터 미국에서 RC 형식으로 사용되기 시작하였으며, 2000년대에는 ECC를 적용한 연결슬래브(ECC 연결슬래브)가 개발된 바 있다. 이 연구에서는 ECC에 비해 재연성이 좋고 경제적인 RC를 적용한 연결슬래브를 다경간 거더형식 프리캐스트 모듈러교량에 적용하였으며, 기존의 RC 형식 연결슬래브를 보완한 형태의 연결슬래브와 수정된 연결슬래브의 설계방법을 제안하였다. 제안된 연결슬래브 설계방법의 검증을 위하여 연결슬래브 바닥판 실험체를 제작하고 연결슬래브의 휨성능 및 균열 사용성 검증실험을 수행하였으며, 이후 실제 교량시스템을 모사한 실험체를 이용하여 200만회 피로성능 검증실험을 수행하였다.