• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1997년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.5-5
• /
• 1997

Rapidly-solidified P/M aluminium alloys for automobile and home appliance industries were developed. Rapidly-solidification made it possible to refine microstructures and to expand the range of alloy composition. For example, Al-Si alloys containing transition metal have lower thermal expansion coefficient, more excellent wear resistance, higher strength, and better machinability than those of conventional aluminium alloys. Therefore, in Japan, the technologies on powder-extrusion and powder-forging of aluminium alloy powders are developed for fifteen years, and applied to several parts, such as cylinder liners of motor cycle engines, rotors and vanes of compressors for car air conditioner, oil pump rotor for racing car, and so on. In this presentation, applications for automobile are mentioned. In particular, cylinder liners made of particle-dispersed composites with fine alumina and graphite are in detail described.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.899-904
• /
• 2001

The impact of PVD coatings can be summed up in practical terms: this technology historically complements the best designed tool substrates to enhance cutting performance. PVD coatings are now incorporated in 25% of all HSS tools. The functionality is to extend the machining speed range, improve wear resistance at the cutting edge, and reduce friction at chip/tool contact areas to allow easier chip evacuation. These translate to a larger safe zone, as discussed in the failure mode diagram, for better productivity and higher reliability in machining operations of the customer. PVD coatings therefore represent an enabling technology that extends the application range of cutting tools in response to modern industrial needs. PVD coatings prolong the product life cycle of HSS tools and help this "mature" material to hold its territory against the advent of the newer hardmetal and ceramic tool materials. There is a lot of competitive life left particularly in PVD coated HSS endmills, drills, threading/tapping tools. PM HSS technology further increases the possibilities.ibilities.

• 한국환경보건학회지
• /
• 제42권6호
• /
• pp.419-429
• /
• 2016

Objectives: According to the new Chemical Control Act from the Korean Ministry of Environment (2014-259), workers handling hazardous chemicals should wear personal protective equipment (PPE). However the act simply states in basic phrases that every worker handling one or more of the 69 listed chemicals should wear PPE and does not consider the unique hazard characteristics of chemicals and work types. The main purpose of this study is to provide basic data to revise the act to suit particular work processes and situations. Methods: The hazard rank of the substances was classified based on hazardous characteristics such as LC50 and vapor pressure using matrix analysis. The workplace exposure risk of the substances was also determined through a matrix analysis based on the previously determined hazard ranks and the demands of manual handling together with the likelihood of accident frequency of the operation combined with the exposure of workers during spill accidents. Results: To meet the demands for developing subsequent guidelines for the risk-based application of PPE in hazardous workplaces, this study sorted the 69 listed chemicals into five hazardous categories based on their LC50 and vapor pressures, and also assigned exposure categories according to exposure vulnerability for various types of work which are frequently performed throughout the life cycle of the chemicals. Conclusion: In the next study, an exposure risk matrix will be produced using the hazard rank of chemicals and workplace exposure risk, and then PPE will be selected to suit the categories of the exposure risk matrix.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.722-732
• /
• 2006

The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.

• 한국산업융합학회 논문집
• /
• 제26권6_2호
• /
• pp.1055-1062
• /
• 2023

Globally, the need for remanufacturing or reusing ships and various mechanical parts continues to increase due to environmental problems including global warming. Research on remanufacturing is being carried out in many areas. However, research on inspection and classification to identify the performance or degree of wear of mechanical parts is insufficient. In particular, studies on the inspection-ability and classification-ability of mechanical parts equipped with various materials and complex forms are highly required. Remanufacturing must be considered from the stage of design to extend the life cycle of mechanical parts. Particularly, it is very important to perform research for evaluating the degree of ease to inspect and classify various sorts of wear or deterioration of parts caused by long-term use easily. In this study, the degree of ease in inspecting or classifying mechanical parts for remanufacturing is defined as inspection-ability and classification-ability. In fact, to remanufacture old parts, inspection-ability and classification-ability should be reflected from the stage of design. The purpose of this study is to evaluate the inspection-ability and classification-ability of ships and various mechanical parts. This researcher has presented the quantitative evaluation procedure of inspection-ability and classification-ability, derived the factors and ranges that influence each of the details of easiness, assigned scores according to the ranges of the factors, and calculated weights. Lastly, this study presents the procedure of scoring to evaluate the overall weights of inspection-ability and classification-ability and also inspection-ability and classification-ability quantitatively.

• 대한소아치과학회지
• /
• 제31권4호
• /
• pp.685-695
• /
• 2004

복합레진은 치질과 우수한 결합력을 가지며 심미적인 이유로 치과의 대표적 수복재로 자리잡고 있다. 그러나 저작력에 따른 마모와 구강내 환경에서의 수분흡수에 따른 가수분해가 복합레진의 강도약화를 야기하고 있다. 실험에 사용된 복합레진은 현재 임상에서 많이 사용되고 있는 Point4, Tetric flow, Heliomolar flow, Filtek supreme 이다. 각 제품의 화학적 분해와 마모도를 평가하기 위해 각각 10개의 시편을 제작하여 그 중 5개는 $37^{\circ}C$의 수중하에 1Kg의 하중을 가하여 10,000 cycle동안의 마모도를 측정하였다. 나머지 5개 시편은 무게 측정을 한 후 0.1N NaOH용액, 3ml에 저장하여 $60^{\circ}C$에서 보관한 후 2주 후 제거하여 1.23% HCl로 2시간 동안 중화하고 증류수로 세척한 후 $60^{\circ}C$에서 건조하였다. 무게 손실, 분해층 깊이 및 시편내의 Si의 농도 변화. 최대 마모 깊이를 근거로 평가하여 다음과 같은 결과를 얻었다. 1. 각 제품의 무게 손실량은 Heliomolar flow, Filtek supreme, Point4, Tetric flow 순이었으며 Heliomolar flow, Filtek supreme을 제외한 다른 제품간에는 유의한 차이를 보였다(P<0.05). 2. 각 제품의 표면하 분해층 깊이는 Filtek supreme, Heliomolar flow, Tetric flow, Point4 순이었으며 Heliomolar flow, Tetric flow을 제외한 다른 제품간에는 유의 한 차이를 보였다(P<0.05). 3. 각 제품으로부터 용출된 Si은 Filtek supreme, Heliomolar flow, Point4. Tetric flow 순이었으며 Point4, Tetric flow을 제외 한 다른 제품간에는 유의한 차이를 보였다(P<0.05). 4. 최대마모깊이 측정시 Heliomolar flow, Point4, Filtek supreme, Tetric flow 순이며 0.1N NaOH 용액에 보관한 레진의 마모깊이가 물에 보관한 레진에 비해 증가한 양상을 보였다. 5. 주사전자현미경 관찰시 NaOH 용액에 보관한 후 레진 기질과 충전제 사이의 결합의 파괴를 관찰할 수 있었으며, 공촛점 레이저 현미경 관찰시 NaOH 용액에 보관한 후 수복재의 기질과 충전제 사이의 파괴양상인 분해층 깊이를 관찰할 수 있었다.

• 청정기술
• /
• 제24권1호
• /
• pp.9-14
• /
• 2018

본 연구에서는 TiN-Zr 수소분리막의 제조 공정에 대한 환경 영향 특성을 분석하기 위해 물질전과정평가를 수행하였다. Material Life Cycle Assessment (MLCA)의 소프트웨어로는 Gabi를 사용하였다. 이를 통하여 각 공정에서 미치는 영향과 특성화 별 환경영향평가를 수행하였다. 졸겔법에 의해 전구체 TiN을 합성하고 볼밀법을 이용하여 지르코늄을 코팅하였다. 이를 CIP, HPS에 의해 디스크 형으로 제작하였고 주사전자현미경(scanning electron microscopy, SEM), 에너지분산형 분광분석법(energy dispersive X-ray spectroscopy, EDS), X-선 회절분석기(X-ray diffraction, XRD), 열중량분석(thermo gravimetry/differential thermal analysis, TG/DTA), 비표면적분석(Brunauer, Emmett, Teller, BET) 및 가스 크로마토그래프 시스템(gas chromatograph system, GP)을 이용하여 분리막의 야금학적, 물리학적, 열역학적 특성을 분석하였다. 또한, 물질전과정평가를 위해 수행한 특성화와 정규화 결과, 영향범주 별 환경영향은 해양 생태 독성이 94%, 수계 생태 독성 2%, 인간독성 2%의 기여도를 보였다. 아울러, 제조공정 중 전기 사용이 생태계 영향에 큰 영향을 미친다는 것을 알 수 있었다. 물질 전 과정 평가는 Eco-Indicator '99 (EI99)와 CML 2001 방법론을 기반으로 분석하였다.

• 한국의류산업학회지
• /
• 제20권1호
• /
• pp.63-74
• /
• 2018

The purpose of this study is to investigate the differences in riding characteristics and helmet wearing conditions between bicycle and PMV riders so that the basis data necessary for the development of suitable helmets for each group is provided. For this purpose, riding characteristics and helmet wearing conditions of bicycle and PMV users were investigated using online survey method and then the survey results were interpreted by in-depth interview conducted for bicycle and PMV users. The online survey results showed that the PMV group showed shorter driving distance and more driving frequency than bicycle group. This short driving distance was due to the limitation of battery capacity of PMVs. Helmet wearing rate was significantly lower in PMV group than in bicycle group, which was associated with relatively low chances to drive long distance on the motorway. In the PMV group, the 'urban helmets' were mainly used, in which the appearance of helmet was priorized, but in the bicycle group, the 'road cycle helmets' were mainly used, in which the light weight or ventilation were priorized. Urban helmets caused stronger pain and more fitting problems than road cycle helmets because the head shapes of Koreans were not properly applied to the helmet design. Since the fitting problem and pain intensity were the important causes that making PMV users not wear the helmets, it is necessary to develop the urban helmets reflecting the head shapes of Koreans in order to increase the helmet wearing rate of the PMV users.

• 한국컴퓨터정보학회논문지
• /
• 제19권8호
• /
• pp.119-127
• /
• 2014

본 논문에서는 편마비 환자는 정상인과 다른 보행 특성을 가지므로 본 논문에서는 이들의 특성을 반영하여 보행자세를 측정하고 실시간 3차원 그래픽으로 보여주는 시스템을 개발하였다. 환자는 허벅지, 종아리 및 발에 각각 센서 모듈을 착용하며, 측정 정밀도를 높이기 위하여 각 모듈에는 3축 가속도 센서와 3축 자이로 센서를 조합하여 적용하였다. 보행자세 디스플레이를 위하여 센서 모듈들로부터 수신한 데이터를 활용하여 허벅지, 종아리 및 발을 3차원 모형으로 모델링하여 실시간으로 화면에 보여주도록 하였으며, 편마비 환자의 특이한 보행 자세를 분석하기에 편리하도록 사용자의 보는 각도를 임의로 변화시킬 수 있도록 하였다. 또한 측정된 자세 정보를 활용하여 RLA(Rancho Los Amigos) 보행 주기의 단계별 진행되는 과정을 실시간으로 판단하여 화면에 표시할 수 있도록 함으로써 진행 단계 및 단계별 소요시간을 통하여 보행의 특성을 평가할 수 있도록 하였다.

• 한국콘텐츠학회논문지
• /
• 제22권3호
• /
• pp.112-120
• /
• 2022

이 논문은 온라인 교육 콘텐츠에 나타난 젠더의 문화적 악순환 양상을 살펴보기 위하여 아동 전문 웹툰 플랫폼, 아이나무툰(EBS툰)의 인기 웹툰 상위 5위 작품에 재현된 젠더 양상을 검토하였다. 아동의 성별을 구분하는 외모 재현 양상, 성별에 따른 인물의 욕망과 문제 상황에서의 심리, 작품에서 수행하는 기능 등을 여성주의 시각에서 비판적으로 분석하였다. 여성과 남성의 외모 특질은 젠더 고정 관념을 답습하는 경우가 많았다. 대부분 여성은 긴 머리, 남성은 짧은 머리였으며 원피스를 입은 여성이 많았다. 그러나 심리적, 기능적 특질은 젠더의 상투성을 깬 측면이 있었다. 주인공의 성별 비중이 비슷하고, 양성 모두 해결사나 구원자로 기능하며 용감하고 지혜롭게 문제 상황을 극복해 나갔다. 그런데 주인공의 젠더 재현에서 젠더 고정 관념이 약하게 나타난 작품일수록 순위가 높았다. 이러한 사실은 아동 감상자들의 비판적 수용과 선택이 젠더의 문화적 악순환을 끊어내는 데 기여할 수 있음을 시사한다.