• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.301-309
• /
• 1999

Real-time kinematic (RTK) GPS surveying which allows centimeter level accuracy of three-dimensional coordinates without post-processing has become recognized as a major advance in GPS technology. Employing On-The-Fly initialization technique, the RTK system can escape from cycle slip problems that have affected as a main obstacle factor in traditional kinematic and static approaches. The objective of this research was to evaluate accuracy and effectiveness of the RTK-GPS surveying. First, the continuous RTK observation of a base line was conducted for the purpose of finding out the repeatability of the RTK surveying and the results which were then compared against results from static surveying showed RMS errors of $\pm{3mm}\;and\;\pm{13mm}$ for their respective horizontal and vertical components. On a test network of 30 stations covering the small area, the results of RTK testing were compared against those from not only post-processing kinematic and rapid-static surveyings but conventional surveyings and also the efficiency of RTK were analyzed. In addition, geoid heights which were derived by combination of GPS and spirit leveling about all of the points within the network were compared against those derived by the PNU95 and EGM96 models respectively.

• Journal of Distribution Research
• /
• v.1 no.1
• /
• pp.41-63
• /
• 1996

In spite of economy has a critical cycle such as, production, distribution and consumption, we hardly concentrated our study to distributional system and behavior. Especially in Korea, Traditional idea had tried to ignore the people who work in this economic value at all. Manufacturers, other than retailers and wholesalers, had a belief that the manufacturing can control distributional channels forever. Unfortunately, technological and educational advances caused the quality equalization among developing and developed countries as well as among big and small manufacturers in their products. By this reason, economists are searching the economists dark continet' mentioned by Peter Drucker as a new source of wealth. According to a report by well-known economic research institute in Switzerland, Korea has classified in the lower level group in terms of international compatitive power. At the same time, business firms complain that they are suffering from lack of SOC and infrastructures. As an important mean to overcome the economic bottleneck, economists suggest in improve our distributional atmosphere. Basically, distributional study has two sub-fields as: commercial and physical distributions, Distributional system mainly concerns about to shorten the distances of time and space between production and consumption. The closer the distances, the higher efficiency can be achieved. Building distributional system will cost, but tile results will save social costs. Based on this idea, economists proposed several ways to cut the distances and to save costs, Naturally, they hope their beliefs can be adapted by business firms and governments. But frequently, their theories doesn't make any fruit. This paper has studied about the composition of joint transportational and distributional systems. And, even though there's no Marshall in tile real world at this point authors are trying to define the transportational and physical distributional costs, the most powerful factor that can impact to economic decision making.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.14-23
• /
• 2018

$TiO_2-coated$ cubic ${\alpha}-Fe_2O_3$ with mostly exposed (012) and (101) facets (${\alpha}-Fe_2O_3@TiO_2$) was fabricated using a hydrothermal route for the photo-Fenton degradation of tetracycline under visible light irradiation. $TiO_2$ coating could greatly affect the photocatalytic activity of ${\alpha}-Fe_2O_3@TiO_2$. Compared with cubic ${\alpha}-Fe_2O_3$ alone for photodegradation of tetracycline, ${\alpha}-Fe_2O_3@TiO_2$ with $TiO_2$ shell of around 15 nm exhibited higher removal efficiency of tetracycline in photo-Fenton system, and its durability was slightly affected after five cycle times under same conditions. It is ascribed to the well-matched interface between cubic ${\alpha}-Fe_2O_3$ core and $TiO_2$ shell, leading to the broadened light-absorption and the efficient separation of photo-generated electon-hole pairs. The $^{\bullet}OH$ radicals were main responsible for the advanced photocatalytic performance of ${\alpha}-Fe_2O_3@TiO_2$ in visible-light driven degradation of tetracycline.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.5
• /
• pp.565-570
• /
• 2019

Proteasome inhibitors can improve the efficiency of cancer treatments by inhibiting nuclear factor ${\kappa}B$($NF-{\kappa}B$) activation in cancer cells. Lentils are a type of beans of which consumption of such beans is increasing. The purpose of this study was to investigate the effects of lentils extract (LE) on the proteasomal activities, $NF-{\kappa}B$ activation, and cell cycle in HepG2 human liver cancer cells. LE treatments inhibited proteasomal activities at concentrations of 10, 50, and $100{\mu}g/mL$ respectively, and repressed $NF-{\kappa}B$ activation at concentrations of 1, 10, and $100{\mu}g/mL$ respectively, in HepG2 cells. LE treatments at concentrations of 1, 10, and $100{\mu}g/mL$ respectively, increased sub-G1 cell population in HepG2 cells, which may be the result of apoptosis. The results suggest that LE inhibited $NF-{\kappa}B$ activation partially with its proteasome inhibitory activities, and the increase of sub-G1 cell population was induced partially, by inhibition of $NF-{\kappa}B$ activation in HepG2 cells.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.1
• /
• pp.26-35
• /
• 2017

The high-cycle fatigue cracking and the resonance generated in operation of a centrifugal compressor are main cause of the impeller damage. In order to prevent the damage, the impeller is designed or modified to have sufficient strength to withstand the operating condition. The damage prevent design will lead to a change of the flow condition and the performance characteristics of the compressor. In this study, the computational analysis were performed to identify the flow and the performance characteristics. The cases are a scalloped and a increased the blade thickness models with a closed type impeller. As the analysis results, the value of head coefficient and total to total efficiency for the increased the blade thickness model was decreased by each 0.5% and 0.1% than the values of the baseline model. Each value for the scalloped model was increased by 0.4% and was decreased by 1.6%.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.423-438
• /
• 2010

Wireless smart sensors enable new approaches to improve structural health monitoring (SHM) practices through the use of distributed data processing. Such an approach is scalable to the large number of sensor nodes required for high-fidelity modal analysis and damage detection. While much of the technology associated with smart sensors has been available for nearly a decade, there have been limited numbers of fulls-cale implementations due to the lack of critical hardware and software elements. This research develops a flexible wireless smart sensor framework for full-scale, autonomous SHM that integrates the necessary software and hardware while addressing key implementation requirements. The Imote2 smart sensor platform is employed, providing the computation and communication resources that support demanding sensor network applications such as SHM of civil infrastructure. A multi-metric Imote2 sensor board with onboard signal processing specifically designed for SHM applications has been designed and validated. The framework software is based on a service-oriented architecture that is modular, reusable and extensible, thus allowing engineers to more readily realize the potential of smart sensor technology. Flexible network management software combines a sleep/wake cycle for enhanced power efficiency with threshold detection for triggering network wide operations such as synchronized sensing or decentralized modal analysis. The framework developed in this research has been validated on a full-scale a cable-stayed bridge in South Korea.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.267-276
• /
• 2021

The automotive industry and academic research have been continuously conducting research on standardization such as AUTOSAR (AUTomotive Open System ARchitecture) and ISO26262 to solve problems such as safety and efficiency caused by the complexity of electric/electronic architecture of automotive. AUTOSAR is an automotive standard software platform that has a layered structure independent of MCU (Micro Controller Unit) hardware, and improves product reliability through software modularity and reusability. And, ISO26262, an international standard for automotive functional safety and suggests a method to minimize errors in automotive ECU (Electronic Control Unit)s by defining the development process and results for the entire life cycle of automotive electrical/electronic systems. These design methods are variously applied in representative automotive safety-critical systems. However, since the functional and safety requirements are different according to the characteristics of the safety-critical system, it is essential to research the AUTOSAR functional safety design method specialized for each application domain. In this paper, a software functional safety mechanism design method using AUTOSAR is proposed, and a new failure management framework is proposed to ensure the high reliability of the product. The AUTOSAR functional safety mechanism consists of memory partitioning protection, timing monitoring protection, and end-to-end protection. The fault management framework is composed of several safety SWCs to maintain the minimum function and performance even if a fault occurs during the operation of a safety-critical system. Finally, the proposed method is applied to the Shift-by-Wire system design to prove the validity of the proposed method.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.11-19
• /
• 2021

In this paper, we propose a prototype platform combined with the power management system using, as an auxiliary power storage device, a supercapacitor that can be fast charged and discharged with high power efficiency as well as semi-permanent charge and discharge cycle life. For the proposed platform, we designed a technique which is capable of detecting the state of power cutoff or resumption of power supplied from the solar panel in accordance with physical environment changes through an interrupt attached to the micro-controller was developed. To prevent data loss in a computing environment in which continuous power supply is not guaranteed, we implemented a low-level system software in the micro-controller to transfer program context and data in volatile memory to nonvolatile memory when power supply is cut off. Experimental results shows that supercapacitors effectively supply temporary power as auxiliary power storage devices. Various benchmarks also confirm that power state detection and transfer of program context and data from volatile memory to nonvolatile memory have low overhead.

• Nano
• /
• v.13 no.10
• /
• pp.1850113.1-1850113.11
• /
• 2018

Environmental and energy issues have always been a hot topic of global research. Oil leakage has caused great damage to the environment, affecting a wide area and it is difficult to clean up. In most cases, carbon-based adsorbents are typically utilized to remove oil spills because of their economic benefits and high adsorbent efficiency. At the same time, its excellent material properties can also be used for the preparation of supercapacitors. In this paper, the carbon aerogels were prepared by the one-step method. The prepared materials endowed a 3D network structure with a huge number of micropores and mesoporous, and the material is light-weight, stable, hydrophobic and has affinity for oil (17.02 g/g) to the KGM carbon aerogel. Through the physicchemical characterization, the KGM carbon aerogel shows specific surface area is $689m^2/g$, high water contact angle ($136.64^{\circ}$) and excellent reusability (more than 15 cycle times). In addition, we also discussed the electrochemical properties of the material and obtained the specific electrical capacity of 139 F/g under the condition of 1 A/g.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.8-11
• /
• 2019

In this paper, a Ku-band 50-W internally-matched power amplifier is designed and fabricated using a CGHV1J070D GaN HEMT from Wolfspeed. To obtain the same magnitudes and phases for the output signals of the unit transistor cells, which constitute a power transistor, a slit pattern and an asymmetric T-junction are used in the input and output matching circuits. The internally-matched power amplifier is fabricated on two different thin-film substrates with relative dielectric constants of 40 and 9.8, respectively, and is measured under pulsed conditions with a pulse period of $330{\mu}s$ and a duty cycle of 6%. The measured results show a maximum output power of 50~73 W, a drain efficiency of 35.4~46.4%, and a power gain of 4.5~6.5 dB from 16.2 to 16.8 GHz.