• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.412-414
• /
• 2009

In recent times, starting up polymer electrolyte membrane fuel cells(PEMFC) in sub-zero condition is a great challenge of fuel cell electric vehicle(FCEV). The water produced in a cathode during PEMFCs operate. The water changes into the form of solid/ice in sub-zero temperatures and this makes trouble in PEMFC cells. Voltage of PEMFC drops and cold startup is failed. This paper describes an experimental study on the effect of thermal cycle to degradation of MEA in PEMFC.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.141-151
• /
• 1994

this paper describes the design and implementation of a RISC processor for embedded control systems. This RISC processor integrates a register file, a pipelined execution unit, a FPU interface, a memory interface, and an instruction prefetcher. Its characteristics include both single cycle executions of most instructions in a 2 phase 20 MHz frequency and the worst case interrupt latency of 7 cycles with the vectored interrupt handling that makes it possible to be applicable to the real time processing system. For efficient handling of multi-cycle instructions, data stationary hardwired control scheme equippedwith cycle counter was used. This chip integrates about 139K transistors and occupies 9.1mm$\times$9.1mm in a 1.0um DLM CMOS technology. The power dissipation is 0.8 Watts from a 5V supply at 20 MHz operation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.250-254
• /
• 1989

This study is to develop the interactive program for work-cell layout of SCAPA type robot using PC. To make the program interactively, we made use of the software which have the function of menu, dialog box, and graphic. By using the mouse, we can progress the program quickly and easily. It has 2 1/2 dimension and provides that one can layout the elements(robot, peripheral device, and etc.), create the work path, and calculate the robot cycle time. By comparing with cycle times of any number of work-cell layout for the same work, we can evaluate work-cell layout and select one work-cell layout to be considered optimal one which has the least cycle time.

• Laser Solutions
• /
• v.10 no.1
• /
• pp.11-17
• /
• 2007

We presented the proper laser processing conditions for the capillary line marking, which could be applied for the fabrication of injection needles. With changing the parameters such as lamp current, duty cycle and beam amplification factor of beam expander, we evaluated the processing performance considering amount of dross, processing efficiency and processed linewidth in the sample. We could carry out the proper line marking at the condition of 70% lamp current, duty cycle of 7-10% and 6-times amplification of beam diameter. To perform efficient line processing, the utilization of duty cycle of 12% at 80% lamp current was also preferred.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.871-879
• /
• 1998

The refrigerator consists of many components such as compressor condenser expansion valve evaporator and the cabinet which filled by urethane foam. In this paper the heat leakage of refriger-ator is measured by the new experiment method which is different from a present method, The devi-ation of the UA(overall heat transfer coefficient times area) between the simulation and experiments is about 7-8%. Using the modeling of various components of refrigeration system a performance analysos of CFC 12 and HFC 134a is performed numerically on the UA. As the results of this study according to increase the heat leakage the refrigeration load and mass flow rate of refrigerant are increased. And the increase of the mass flow rate results in the increase of the condensing and evapo-rating temperature. Therefore according to increase of the heat leakage the COP leads to increase because the increase of refrigeration capacity is larger than the increase if compressor power.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.2
• /
• pp.130-139
• /
• 1994

A cycle analysis was performed for 2-stage expansion Claude refrigerators by a numerical method. The refrigerators are under recent development such that the reciprocating expanders of Collins cycle are replaced by new turboexpanders. A computer simulation program was written to predict the coefficient of performance of the refrigerators for several input parameters. It was found out that there exist unique optimum values for the ratio of expanded mass through the turboexpanders to the total mass and for the intermediate pressure of the 2-stage expansion. The maximum coefficient of performance was about $5{\times}10^{-4}$ at the optimal operation.

• 한국기계연구소 소보
• /
• s.19
• /
• pp.117-123
• /
• 1989

This study is to develop interactive program for work-cell layout of SACARA type robot by using PC. To make this program interactively, we made use of the software which has the function of menu, dialog box, and graphic. By using the mouse, we can progress this program quickly and easily. It has 2Y2 dimension and provides that one can layout elements (robot, peripheral device, and etc.), create work path, and calculate cycle time of working robot. By comparing with cycle times of any number of work-cell layout for same work, we can evaluate work-cell layout. Finally, we can select one work-cell layout to be considered optimal one which has the least cycle time.

• Nuclear Engineering and Technology
• /
• v.50 no.5
• /
• pp.758-766
• /
• 2018

We developed numerical models to efficiently simulate the low-cycle fatigue behavior of a pipe elbow. To verify the model, in-plane cyclic bending tests of pipe elbow specimens were conducted, and a through crack occurred in the vicinity of the crown. Numerical models based on the erosion method and tie-break method are developed, and the numerical results are compared with experimental results. The calculated results of both models are in good agreement with experimental results, and the model using the tie-break method possesses two times faster calculation speed. Therefore, the numerical model based on the tie-break method would be beneficial to evaluate the strength of piping systems under seismic loadings.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.386-397
• /
• 2007

One major development in bridge life cycle cost analysis (LCCA) in recent years is to develop deterioration model for bridge components so that the times of repair/replacement throughout a component's life span can be properly determined. Taiwan also developed her own bridge LCCA model in 2003, integrating with the bridge inspection database in the local bridge management system (T-BMS). Under the framework of the local LCCA model, this study employs the reliability method in developing a deterioration model of bridge components. A component deteriorates through time in its reliability, which represents the probability of a component's condition index exceeds a user specified threshold. Model assumptions and rationale are described in the paper. The steps for applying the developed model are explained in detail. Results and findings are reported.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.15 no.4
• /
• pp.356-361
• /
• 1986

An optimum design condition for a basic refrigeration cycle is defined as the condition which minimizes the total cost of heat exchanges (condenser and evaporator) and compressor for the refrigeration effect. Thermodynamic properties of ammonia (R717) are approximated by rational functions in order to obtain the optimum condition for a basic refrigeration cycle. Optimum condition depends on the heat capacity rates (mass flow rate times specific heat) of cooling water and brine used in condenser and evaporator. The difference between the cooling water temperature and condensation temperature at the optimum condition increases as the heat capacity rates and the coat of heat exchangers relative to the cost of compressor increase. Numerical examples of optimum conditions are obtained when the condensation temperature is $30^{\circ}C$ and the evaporator temperature is $-10^{\circ}C$.