• Toxicological Research
• /
• v.5 no.1
• /
• pp.27-35
• /
• 1989

When acetaminophen (25mM) was introduced into the perfused rat liver, the hepatic O2 uptake was rapidly inhibited first and then later slow-down. The rapid inhibition was found to be due to mitochondrial blockade, whereas the so-called slow inhibition" was associated with microcirulatory aberrations as evidenced by inhomogneous staining of the liver tissue by trypan blue infusion (0.1%). NaCN (0.5mM) also caused rapid and slow respiratory inhibitions, giving heterogeneous trypan blue staining.ning.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.210-213
• /
• 1986

1,1-Dicyano-2-ethoxycyclobutane (1a) was prepared by [2 + 2] cycloaddition reaction of vinylidene cyanide with ethyl vinyl ether. 1,1-Dicyano-2-phenylcyclobutane (1b) was prepared by the reactions involving the reduction of cinnamyl alcohol, chlorination, cyanomethylation, bromination, and ring-closure reaction. Compound 1a was ring-opening polymerized with NaCN or n-butyllithium to give a low molecular weight polymer. The compound 1b however, failed to polymerize by either anionic or radical catalysts.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.163-171
• /
• 2006

This study was performed to develop an analytical method in specified wastes for preventing the environmental pollution from hazardous wastes. Few analytical methods were developed using the waste standard reference materials of sludge, waste oil, bottom ash, etc. which contain As, CN, Cd, Cr, Cu, Pb, and Hg compounds. The pre-treatment method was considered by whether or not the synchronous analysis is possible. Waste samples obtained from the 34 representative facilities, which are emitting the hazardous substances, were analyzed.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1581-1585
• /
• 2012

Two pyridinecarboxamide dicyanidecobalt(III) building blocks and two mononuclear seven-coordinated macrocycle manganese(II) compounds have been rationally selected to assemble cyanide-bridged heterobimetallic complexes, resulting in three cyanide-bridged $Co^{III}-Mn^{II}$ complexes. Single X-ray diffraction analysis show that these complexes $\{[Mn(L^1)][Co(bpb)]\}ClO_4{\cdot}CH_3OH{\cdot}0.5H_2O$ ($\mathbf{1}$), $\{[Mn(L^2)][Co(bpb)]\}ClO_4{\cdot}0.5CH_3OH$ ($\mathbf{2}$) and ${[Mn(L^1)][Co(bpb)]\}ClO_4{\cdot}H_2O$ ($\mathbf{3}$) ($L^1$ = 3,6-diazaoctane-1,8-diamine, $L^2$ = 3,6-dioxaoctano-1,8-diamine; $bpb2^{2-}$ = 1,2-bis(pyridine-2-carboxamido)benzenate, $bpmb2^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-methyl-benzenate) all present predictable one-dimensional single chain structures. The molecular structures of these one-dimensional complexes consists of alternating units of $[Mn(L)]^{2+}$ ($L=L^1$ or $L^2$) and $[Co(L^{\prime})(CN)2]^-$ ($L^{\prime}=bpb2^{2-}$, or $bpmb2^{2-}$), forming a cyanide-bridged cationic polymeric chain with free $ClO_4{^-}$ as the balance anion. The coordination geometry of manganese(II) ion in the three one-dimensional complexes is a slightly distorted pentagonal-bipyrimidal with two cyanide nitrogen atoms at the trans positions and $N_5$ or $N_3O_2$ coordinating mode at the equatorial plane from ligand $L^1$ or $L^2$. Investigation over magnetic properties of these complexes reveals that the very weak magnetic coupling between neighboring Mn(II) ions connected by the diamagnetic dicyanidecobalt(III) building block. A best-fit to the magnetic susceptibility of complex ${\mathbf}{1}$ leads to the magnetic coupling constants $J=-0.084(3)cm^{-1}$.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.689-693
• /
• 2010

Second-order rate constants ($k_{CN^-}$) have been measured for nucleophilic substitution reactions of Y-substituted phenyl benzoates (1a-r) with $CN^-$ ion in 80 mol % $H_2O$/20 mol % DMSO at $25.0{\pm}0.1^{\circ}C$. The Br${\o}$nsted-type plot is linear with ${\beta}_{1g}$ = -0.49, a typical ${\beta}_{1g}$ value for reactions reported to proceed through a concerted mechanism. Hammett plots correlated with ${\sigma}^{\circ}$ and ${\sigma}^-$ constants exhibit many scattered points. In contrast, the Yukawa-Tsuno plot for the same reaction exhibits excellent linearity with ${\rho}_Y$ = 1.37 and r = 0.34, indicating that a negative charge develops partially on the oxygen atom of the leaving aryloxide in the rate-determining step (RDS). Although two different mechanisms are plausible (i.e., a concerted mechanism and a stepwise pathway in which expulsion of the leaving group occurs at the RDS), the reaction has been concluded to proceed through a concerted mechanism on the basis of the magnitude of ${\beta}_{1g}$ and ${\rho}_Y$ values.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.175-183
• /
• 1999

Mine tailings, field soils, and paddy soils around Jingok abandoned mine were analyzed In order to investigate their pollution levels of heavy metals and cyanide. The average contents of As, Cd, Cu. Hg. Pb, Zn, and CN￣in mine tailings were 3.94$\times$$10^3$, 14.3, 266, 6.13, 4.07$\times$$10^3$, 2.51$\times$$10^3$, and 1.19mg/kg, respectively. The pollution indices calculated by the tolerance level of Kloke were 32~58 and the pH values were slightly acidic in mine tailings. In the field and paddy soils of Jingok abandoned mine area except for soils nearby mine tailings, concentrations of the heavy metals were less than standards of soil pollution of agricultural area in the environmental protection law.

• Journal of the Korean Chemical Society
• /
• v.68 no.3
• /
• pp.139-145
• /
• 2024

This study aims to elucidate the mechanism involved in the hydrolysis of the hexacyanoferrate(III) complex ion (Fe(CN)₆^3-) and the mechanism leading to the formation of Prussian blue (Fe^III₄[Fe_II(CN)₆]₃·xH₂O, PB) in acidic aqueous solutions at moderately elevated temperatures. Hydrolysis constitutes a crucial step in generating PB through the widely used single-source or precursor method. Recent PB syntheses predominantly rely on the single-source method, where hexacyanoferrate(II/III) is the exclusive reactant, as opposed to the co-precipitation method employing bare metal ions and hexacyanometalate ions. Despite the widespread adoption of the single-source method, mechanistic exploration remains largely unexplored and speculative. Utilizing UV-vis spectrophotometry, negative-ion mode liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS), and a devised reaction, this study identifies crucial intermediates, including aqueous Fe^2+/3+ ions and hydrocyanic acid (HCN) in the solution. These two intermediates eventually combine to form thermodynamically stable PB. The findings presented in this research significantly contribute to understanding the fundamental mechanism underlying the acid-catalyzed hydrolysis of the hexacyanoferrate(III) complex ion and the subsequent formation of PB, as proposed in the sequential mechanism introduced herein. This finding might contribute to the cost-effective synthesis of PB by incorporating diverse metal ions and potassium cyanide.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2029-2032
• /
• 2008

• Journal of Environmental Health Sciences
• /
• v.14 no.2
• /
• pp.65-71
• /
• 1988

In this study, the method of adsorption by activated carbon in the removal of Hg(II) ion in waste water was treated. The influence of kinds of activated carbon and effect of temperature and the influence of coexistent salt on adsorption rates, the influence of pH in the adsorption, equilibrium and adsorption of mercury from activated carbon were investigated. From the adsorption on activated carbon of mercury(II) ion in the presence of cyanide or thiocyanate ion was found that mercury(II) was easily adsorved onto the activated carbon in the form of complex artion such as Hg(CN)$_4^{2-}$, Hg(SCN)$_4^{2-}$ respectively. ZnCl$_2$ activation method had a higher adsorptive ability than steam activation method in adsorption of Hg on activated carbon. Activated carbon adsorbed iodide ion is very effective on adsorption of Hg.

• Journal of the Korean institute of surface engineering
• /
• v.1 no.1
• /
• pp.5-13
• /
• 1967

Up to this date, numerous methods of analysis of electropling solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelop countries, technicians of electroplating shops are most high school graduates or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equipment . Therefore, in this paper the simplest, besides accurate method is investigated after comparing numerous methods published. Among the methods of copper determinations from acid and alkaline copper plating baths, EDTA titration method are chosen, due to these methods are the simpest and fastest for the evaluation of metal content, without requirng any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of indicators and other metal's coexisitence as well as solution component, many difficulties were encountered from cyanide copper, on the contrary of acid copper bath. PAN , PV, and MX indicators were tried , but it is found that MX is the best. In chyanide solution ,due to cyanide is the masking reagent , elimination of this component is essential , and finally found that elimination CN-by precipitation with AgNO$_3$ solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method form time to time, before chelate titration by means of AgNO$_3$ precipitation. Always some constant deviations will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.