• 한국환경과학회지
• /
• 제17권3호
• /
• pp.335-342
• /
• 2008

This study based on electro-coagulation & oxidation reaction is applied to wastewater treatment. Electro-oxidation reaction is used to remove cyanide(CN) which is contained in plating wastewater. Cyanide is transferred by gases such as $NH_3,\;NO_x,\;CO_2$. Analysis result and removal efficiency of Cyanide which is contained in heavy metal wastewater of plating plant, are shown as following paragraph. In electrode arrangement experiment, removal efficiency of carbon electrode(-)/STS316L electrode(+) arrangement method is superior to carbon electrode(-)/carbon electrode(+) arrangement method. Removal efficiencies of cyanide in different HRT such as 30 min, 45 min, 60 min, 75 min and 90 min are 85.5%, 93.1%, 98.0%, 98.7% and 99.4% respectively in carbon electrode(-)/STS316L electrode(+) arrangement method. Finally we can estimate the critical point at HRT of 60 min which the variation of removal efficiency is decreased and HRT to obtain removal efficiency of less than 1 mg/LCN is minimum 90 min.

• 한국식품과학회지
• /
• 제42권2호
• /
• pp.130-135
• /
• 2010

건강기능식품공전에서 유해물질로 분류되어 관리되고 있는 매실추출제품 중 시안화합물의 효과적인 분석을 위하여 피크린산지법, 효소-피크린산지법, IC 및 HPLC를 이용한 기기분석법을 검증하고 비교하였다. 먼저, 피크린산지법은 가장 분석소요시간이 짧았으며, 0.01 mg/$200\;mL\;CN^-$에서 피크린산지의 변색이 관찰되었으나, 배당체 형태의 아미그달린으로부터 유래되는 시안화합물을 검출하는 것에 한계가 있었다. 반면, $\beta$-glucosidase를 이용한 효소-피크린산지법은 아미그달린으로부터 유래되는 시안화합물을 포함한 총 시안화합물의 정성분석 및 분광광도계를 이용한 정량 분석이 가능하였다. 마지막으로, IC 및 HPLC를 이용한 시안화합물 분석법은 유리되어 있는 시안화합물과 아미그달린을 분석하기 위해 각각 서로 다른 전처리 과정을 거쳐야 하며, 분석시간 또한 가장 많이 소요되었다. 이러한 결과들을 미루어 볼 때, 매실추출제품에 존재하는 시안화합물 분석법으로는 효소-피크린산 지법이 가장 효과적임을 알 수 있었다.

• 한국토양환경학회지
• /
• 제4권1호
• /
• pp.35-47
• /
• 1999

구봉광산의 광미와 주변 밭과 논의 토양 및 하상퇴적물에서의 중금속과 시안의 분포 및 오염도에 대해 조사하였다. 광미 중의 As, Cd, Cu, Hg, Pb, Zn및 CN￣의 평균농도는 각각 6.93$\times$$10^{3}$, 56.9, 209, 5.03, 3.25$\times$$10^{3}$, 1.89$\times$$10^{3}$, 21mg/kg이었고 Kloke가 제안한 허용기준치를 이용하여 계산한 오염지수는 42~95이었으며 pH는 약알칼리성이었다. 광산과 인접한 밭 토양 중의 중금속과 시안 함량은 논 토양보다 높았다. 하상퇴적물 중의 중금속과 시안 함량은 광미 중의 분석치정도로 많이 검출되었다.

• 응용화학
• /
• 제16권1호
• /
• pp.25-28
• /
• 2012

A determination method of cyanide ion (CN^-) using nickel complexation reaction by continuous monitoring system. The mechanical parameters and chemical conditions of the complexation reaction were investigated prior to application of continuous monitoring system for determination of cyanide. On the optimized conditions, the calibration curve was linear over the range from 5.0×10^-6 to 1.0×10^-4 M. In this range, 2.40% of the reproducibility (RSD, n=3) was obtained. The limit of detection (3σ/s) was calculated to be 1.8×10^-6 M.

• 기술사
• /
• 제14권1호
• /
• pp.22-29
• /
• 1981

This study concernes the decomposition of cyanide ion in electroplating plant wastewater and COD variation of photodeveloping wastewater under various conditions. Determinations of CN- concentration were carried out by AgNO$_3$ titration method. The sample solutions were pretreated by passing ozone and decompositions were checked as a function of time for ozone treatment. Analysis of film developing wastewater was carried out by KMnO$_4$ method. Electroplating plant wastewater was also examined at various pH; decomposition rate of cyanide ion was found to increase at higher pH. Time required for the decomposition could be shortened by removing the heavy metal ions under alkaline condition. The effect of temperature on decomposition was studied at 40$^{\circ}$ and 60$^{\circ}C$. The result was better at 40$^{\circ}C$ although time for decomposition was almost same at both temperatures. Analysis of film developing wastewater revealed that COD decrease was faster during the first 1 to 2 hours. However, further decrease could not be effected. The existence of unknown special organics resistant to the decomposition was believed to be the reason.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.635-636
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1164-1166
• /
• 2009

Aromatic aldehydes are efficiently self-condensed into $\alpha$-hydroxy carbonyl compounds by polystyrene-supported ammonium cyanide as an excellent organocatalyst in C-C bond formation. The reaction proceeds in water under mild reaction conditions. The polymeric catalyst can be easily separated by filtration and reused several times without appreciable loss of activity.

• 분석과학
• /
• 제21권6호
• /
• pp.562-568
• /
• 2008

A novel two-dimensional cadmium(II)-nickel(II) bimetallic host clathrate, $[Cd{NH_2CH_2CH_2OH}_2Ni(CN)_4]{\cdot}3C_6H_5NH_2{\cdot}H_2O$, 1, has been synthesized and structurally characterized by X-ray single crystallographic method. The clathrate 1 crystallizes in the monoclinic system, space group $P2_1/c$ with a = 14.370(3), b = 7.728(1), c = 28.172(4) ${\AA}$, ${\beta}=97.58(1)^{\circ}$, V = 3101.1(9) ${\AA}^3$, Z = 4. The host framework of the clathrate 1 is built of the cyanide bridges between octahedral Cd(II) atom and square planar Ni(II) atom. The octahedral Cd atoms ligated by two 2-aminoethanol molecules and four cyanide ligands bridged with square planar Ni atoms. The Ni atoms bridges to four Cd atoms via cyanides is made up of puckered quadrangles of composition $\{CdNi(CN)_2\}_2$, all edges are shared. This cyanide bridges form an infinite two-dimensional host networks stacking along b axis. 2-Aminoethanol ligands bond to Cd atom through N atom as a monodentate ligand in the axial position and four cyanides take an equatorial plane with all in trans-configurations. The aniline guest molecules and water molecules are located in between the host layer sheets, respectively.

• 한국표면공학회지
• /
• 제29권2호
• /
• pp.140-145
• /
• 1996

Silver deposits formed on copper substrates by replacement reactions show poor adhesion, and a silver film plated on such a deposit does not adhere. Silver ion makes a highly stable complex with cyanide ion, so that in a silver cyanide solution, the activity of silver ion is very small. This is one of the reasons for the universal use of cyanide baths in the industrial silver plating. However, the consideration of the difference between the values of the stability constants for bath the silver-iodide complex and the copper-iodide complex suggest that the rate of replacement deposition of silver on the copper substrate in si]ver-potassium iodide solution, could be comparatively low. To confirm this, the rate of replacement deposition of silver in both a silver-potassium iodide solution ($AgNO_3$0.10 mol/L, KI 2.00 mol/L ) and a strike silver plating bath (AgCN 0.028 mol/L, KCN 1.15 mol/L ) was estimated from the current density corresponding to the point of intersection of the anodic and the cathodic polarization curves. These estimated values were almost the same, and it is suggested that the silver-potassium iodide solution is not only a cyanide free silver plating bath capable of employing a copper substrate but a silver plating bath which requires no strike plating.

• 공업화학
• /
• 제8권3호
• /
• pp.438-445
• /
• 1997

마드래스형 티타늄 기판위에 전착시킨 $\beta$형-이산화납 전극을 이용하여 도금폐수중의 시안염을 분해하기 위한 최적조건에 관하여 검토하고자 하였다. 시안분해에 알맞는 온도 및 pH를 검토한 후 500ppm NaCN을 전해질로 하여 시안분해효율이 높아질 수 있는 이산화납의 전착전류밀도와 시안의 분해전류밀도를 구하였으며, 이산화납 전극의 내구성을 조사하였다. 시안화수소의 발생은 온도 $40^{\circ}C$이상의 시안염용액에서 활발했으며 pH 13이상에서는 시안화수소가 발생하지 않았다. $5A/dm^2$의 전류밀도로 전착시킨 이산화납전극에서 최대의 시안분해효율을 나타냈다. $0.08A/dm^2$의 시안분해전류밀도에서 약 70%의 시안분해 전류효율을 보였으며 $4A/dm^2$이상에서는 약 10% 정도로 일정해지는 경향을 보였다. 이산화납 전착층은 약 $20A/dm^2$의 시안분해 전류밀도에서부터 열화가 일어났으며 약 $50A/dm^2$에서 파괴되었다.