Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2008.11a
/
pp.207-207
/
2008
Modern industry has focused on processing that produce low- loss dielectric substrates used complex micron-sized devices using tick film technologies such as tape casting and slip casting. However, these processes have inherent disadvantages fabricating high density interconnect with embedded passives for high speed communication electronic devices. Here, we have successfully fabricated porous alumina dielectric layer infiltrated with polymer solution by using inkjet printing process. Alumina suspensions were formulated as dielectric ink that were optimized to use in inkjet process. The layer was confirmed by field emission scanning electron microscope (FE-SEM) for measuring microstructure and volume fraction. In addition, the reaction kinetics and electrical properties were characterized by FT-IR and the impedance analyzer. The volume fraction of alumina in porous dielectric alumina layer is around 70% much higher than that in the conventional process. Furthermore, after infiltration on the dielectric layer using polymer resins such as cyanate ester. Excellent Q factors of the dielectric is about 200 when confirmed by impedance analyzer without any high temperature process.
Proceedings of the Korean Society For Composite Materials Conference
/
2003.10a
/
pp.132-136
/
2003
A Multi-Spectral Camera (MSC) is the payload of KOMPSAT-2 which is designed for earth imaging in visible and near-Infrared region on a sun-synchronous orbit. The telescope in the MSC is a Ritchey-Chretien type with large aperture. The telescope structure should be well stabilized and the optical alignment should be kept steady so that best images can be achieved. However, the MSC is exposed to adverse thermal environment on the orbit which can give impacts on optical performance. Metering structure which is exposed to adverse space environment should have tight requirement of low thermal expansion and hygroscopic stability. In order to meet those stability requirements in addition to fundamental structural ones telescope structure was designed with newly developed graphite-cyanate composite which has high tensile modulus, high thermal conductivity and low moisture absorption compared with conventional graphite-epoxy composite. In this paper, space-borne telescope structure with new composite material will be presented and fulfillment of stability requirements will be verified with designed structure.
Staphylococcal enterotoxin B (SEB) is bacterial toxin that induces the activation of immune cells. Because the inhibition of pro-inflammatory effect of SEB can resolve the inflammation, I determined the influence of functional or structural change of SEB on immune cells. The post translational modification of protein occurs through carbamylation. Carbamylation can change the structure of proteins and can modify the biological activity of protein. In the present study, I investigated the effect of carbamylated SEB (CSEB) on the inflammatory response mediated by LPS in HL-60 cells. To determine the anti-inflammatory effect of CSEB, I produced carbamylated SEB using potassium cyanate (KCN) and then examined whether CSEB involved in cytokine releases and apoptosis of LPS-stimulated HL-60 cells. Although CSEB had not any effect on the LPS-stimulated HL-60 cells, the protein levels of IL-8, TNF-${\alpha}$ and IL-$1{\beta}$ were significantly decreased by CSEB without cytotoxicity. CSEB also blocked Akt and NF-${\kappa}B$ activation. These results indicate that the suppressive effect of CSEB in LPS-stimulated cytokine releases is occurred by inhibition of Akt and NF-${\kappa}B$ activity. Through further studies, CSEB may be used as anti-inflammatory molecule that makes the immune system more efficient.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2010.06a
/
pp.332-332
/
2010
We have successfully demonstrated the inkjet printing method to create $Al_2O_3$ films withouWe have successfully demonstrated the inkjet printing method to create $Al_2O_3$ films without a high temperature sintering process. In order to remove the coffee ring effect in the ink drop, we have introduced a co-solvent system in order to create Marangoni flow in the ink drop, which leads to the dense packing of ceramic powders on the substrate during inkjet process. The packing density of the Inkjet-printed $Al_2O_3$ films is around 60% (max. 70%) which is very high compared to the value obtained from the same material films by other conventional methods such as film casting, dip coating process, etc. The voids inside the films (which are around 40% of the entire film volume) are filled with the polymer resin (Cyanate ester) by the infiltration process. This resin infiltration is also implemented by the inkjet printing process right after the Ah03 film ink-jetting process. The microstructures of the printed $Al_2O_3$ films are investigated by Scanning Electron Microscope (SEM) to understand the degree of packing density in the printed films. The inkjet-printed $Al_2O_3$ films have been characterized to investigate its thickness and roughness. Quality factor of the printed $Al_2O_3$ film is also measured to be over 300 at 1MHz.
Peroxidase from Jerusalem artichoke tubers, which might be related to browning reaction, was purified by ammonium sulfate precipitation, DEAE-cellulose and Sephacryl S-200 chromatography. The optimum pH of the purified peroxidase was 5.0 and relatively stable at pH $5.0{\sim}6.0$ using substrate of p-phenylenediamine and $H_2O_2$. D-values for thermal inactivation at 60, 70 and $80^{\circ}C$ were 86, 45 and 33 sec, respectively. Activation energy was 4,111 J/mole. The enzyme showed the most sensitive specificity of substrate for p-phenylenediamine. The compounds such as 1mM potassium cyanide, 10mM sodium diethyldithiocarbamate, L-ascorbic acid, sodium hydrosulfite and L-cysteine inhibited completely while 1mM of $Ca^{2+}\;and\;Cu^{2+}$ activated the purified peroxidase.
In this study, Cordyceps militaris was grown in a liquid medium containing colloidal chitin. A chitinase was purified from the supernatant or cultured medium by ammonium sulfate fractionation, DEAE-Sephadex A-25 and Sephadex G-50 column chromatography. Optimum temperature and pH of this enzyme were $35^{\circ}C$ and 5.5, respectively. The molecular weight of the chitinase was estimated to be 48.5 kDa by SDS-PAGE and its Km value was 0.57 mM. The activity of this enzyme was inhibited by $Cu^{2+},\;Mn^{2+},\;Hg^{2+},\;Zn^{2+},\;CO_{3}^{2-},\;SO_4^{2-},\;CN^-,\;ion,\;and\;OCN^-$ maleic anhydride, acetic anhydride or N-bromo succinimide, especially strongly inhibited by sodium cyanate for 84.0 percentage. But its activity wag slightly stimulated by $Mg^{2+}\;and\;K^+$ ion, respectively. The products formed during hydrolysis of the hexa-N-acetylchitohexaose with this enzyme were N,N'-diacetylchitobiose and N,N',N'-triacetylchitotriose. These results imply that this purified enzyme may be an endo-chitinase.
Kim, Dong-Jun;Hwang, Yun-Chan;Kim, Sun-Ho;Oh, Won-Mann;Hwang, In-Nam
Restorative Dentistry and Endodontics
/
v.28
no.5
/
pp.392-401
/
2003
The purpose of this study was to evaluate the penetration pattern of dentin adhesives according to the orientation of dentinal tubules with confocal laser scanning microscopy. Specimens having perpendicular. parallel and oblique surface to dentinal tubules were fabricated. The primer of dentin adhesives (ALL $BOND^{\circledR}{\;}2,{\;}CLEARFIL^{TM}$ SE BOND and PQ1) was mixed with fluorescent material. rhodamine B isothio-cyanate (Aldrich Cherm. CO., Milw., USA), It was applied to the specimens according to the instructions of manufactures. The specimens were covered with composite resin (Estelite, shade A2) and then cut to a thickness of 500$\mu\textrm{m}$ with low speed saw (Isomet^{TM}, Buehler. USA). The adhesive pattern of dentin adhesives were observed by fluorescence image using confocal laser scanning microscopy. The results were as follows. 1. For the groups with tubules perpendicular to bonded surface. funnel shape of resin tag was observed in all specimen. However. resin tags were more prominent in phosphoric acid etching system (ALL $BOND^{\circledR}$ 2 and PQ1) than self etching system ($CLEARFIL^{TM}$ SE BOND). 2. For the groups with tubules parallel to bonded surface. rhodamine-labeled primer penetrated into peritubular dentin parallel to the orientation of dentinal tubules. But rhodamine-labeled primer of PQ1 diffused more radially into surrounding intertubular dentin than other dentin adhesive systems. 3. For the groups with tubules oblique to bonded surface. resin tags appeared irregular and discontinuous. But they penetrated deeper into dentinal tubules than other groups.
젖산균의 유전자 연구를 촉진하기 위해 간단하고 신속한 plasmid DNA의 분리방법과 electro-poration을 이용하여 vector plasmid의 간단하고 신속한 전이방법을 얻기 위해 젖산균의 형질전환에 영향하는 요인에 대하여 연구하였으며 연구결과는 다음과 같다. 1. O'Sullivan과 Klaenhammer의 방법을 개선하여 젖산균 plasmid DNA의 분리에 좋은 결과를 얻을 수 있는 신속하고 쉬운 방법을 고안하였으며, genomic DNA 분리에 이용되는 guanidium thio-cyanate 처리방법을 plasmid의 분리에 적용할 수 있었다. 2. L. casei, L. acidophilus. L. delbruekii var. bulgaricus. L. brevis와 L. plantarum 균주에서 plasmid를 확인하였으며, 돼지 분에서 분리된 L. lactis ssp. lactis. L. fermentum과 L. plantarum에서도 plasmid를 분리 확인하였다. 3. Lactococci의 plasmid분리는 lactobacilli와는 달리 mutanolysin의 처리없이도 잘 되었으며, L. lactis ssp. lactis와 Ent. faecalis에서 plasmid를 확인하였다. 4. E. coli plasimd 분리에 이용되는 MPS membrane filter 방법으로 젖산균 plasmid pLZ12의 분리가 가능하였으나, 세포파편이 filter를 막아 사용에 어려움이 있는 것으로 확인되었다. 5. Plasmid 분리없이 electroporation을 이용한 세포 대 세포 전이법으로 간편하고 빠르게 E. coli DH5${\alpha}$에 E. coli Jm109의 plasmid pBX19, pBR322를 전이시켰다. 6. L. lactis ssp. lactis 균주에 lysozyme 처리시 30${\sim}$80%의 생존율을 보였으며, 대부분의 L. acidophilus 균주의 경우 약 70%의 생존율을 보였다. L. casei 102S의 경우는 45분간 처리 시에도 100%의 생존율을 보였다. 8. L. lactis ssp. lactis 균주에 pLZ12를 6.0kV에서 전이시킨 결과 12.5kV에서보다 형질전환 효율이 훨씬 높았으며 lysozyme 처리에 의해 형질전환 효율이 증가되었다. 9. L. acidophilus 균주에 pLZ12를 전이시 6.0kV에서는 전이가 모두 이루어졌으나, 12.5kV에서는 L. acidophilus WIESBY와 NCFM에서 전이가 이루어지지 않았으며, lysozyme 처리 후 pLZ12를 전이시켰을 때 12kV보다 6.0kV에서 형질전환 효율이 증가되었다. 10. Gene Pulser와 Progenitor II를 사용하여 pLZ12를 L. lactis ssp. lactis 균주에 전이하였을 때 Gene Pulser에 비해 Progenitor II의 형질전환 효율이 현저히 떨어졌다. L. acidophilus HY7008과 HY7001은 두 기기 모두 형질전환이 이루어졌으나, L. acidophilus WEISBY와 NCFM은 Progeni-tor II에서 전이가 일어나지 않았으며, Gene Pulser에서 전이균주를 얻어 두 electroporator간에 형질전환 효율의 차이를 보였다. 11. L. casei 102S에 pLZ12를 electroporation시 낮은 전압에서 형질전환 효율이 비교적 좋았으며, 배양 시기를 달리하여 전이시켰을 때 대수생장 말기의 세포가 형질전환 효율이 좋았다. 12. L. casei 102S세포를 각각 10% glycerol, EB, 2차 증류수 등에 녹여 electroporation을 실시하였을 때 각각 $3.8{\times}10^3$, $5.0{\times}10^2$,1.5${\times}10^2$cfu의 형질전환 효율을 보였으며, 1.0mM HEPES, TE buffer를 사용하였을 때에는 전이가 이루어지지 않았다. 13. Plasmid pLZ12의 농도를 달리하여 electroporation을 하였을 때 형질전환 효율이 농도에 비례하여 증가하였다. 14. L. casei 102S에 대수생장 말기의 세포를 채취하여 10% glycerol, 200 Ohms, 25 ${\mu}$FD, 10kV/cm로 plasmid pLZ12를 electroporation할 때 최대 형질전환 효율인 3.8${\times}$10$^{3}$cfu를 얻었으며, lysozyme 처리가 다른 젖산균과는 달리 형질전환 효율을 증가시키지 못하였다. 15. L. casei 102S 세포를 10% glycerol과 EB에 녹여 -20$^{\circ}C$에서 냉동시킨 다음 1일과 7일 후의 세포를 electroporation한 결과 냉동시 세포에 손상을 주는 것으로 인식되었다.
Park, Seongchul;Park, Jaeheung;Lin, Han-Wei;Lim, Manho
Bulletin of the Korean Chemical Society
/
v.35
no.3
/
pp.758-764
/
2014
Femtosecond vibrational spectroscopy was used to measure the vibrational population relaxation time ($T_1$) of different anions bound to ferric myoglobin ($Mb^{III}$) and hemoglobin ($Hb_{III}$) in $D_2O$ at 293 K. The $T_1$ values of the anti-symmetric stretching (${\nu}_1$) mode of NCS in the $NCS^-$ bound to $Mb^{III}$ ($Mb^{III}$NCS) and $Hb_{III}$ ($Hb_{III}$NCS) in $D_2O$ are $7.2{\pm}0.2$ and $6.6{\pm}0.2$ ps, respectively, which are smaller than that of free NCS. in $D_2O$ (18.3 ps). The $T_1$ values of the ${\nu}_1$ mode of NCO in the $NCO^-$ bound to $Mb^{III}$ ($Mb^{III}$NCO) and $Hb_{III}$ ($Hb_{III}$NCO) in $D_2O$ are $2.4{\pm}0.2$ and $2.6{\pm}0.2$ ps, respectively, which are larger than that of free $NCO^-$ in $D_2O$ ($1.9{\pm}0.2$ ps). The smaller $T_1$ values of the ${\nu}_1$ mode of the heme-bound NCS suggest that intramolecular vibrational relaxation (VR) is the dominant relaxation pathway for the excess vibrational energy. On the other hand, the longer $T_1$ values of the ${\nu}_1$ mode of the heme-bound NCO suggest that intermolecular VR is the dominant relaxation pathway for the excess vibrational energy in the ${\nu}_1$ mode of $NCO^-$ in $D_2O$, and that intramolecular VR becomes more important in the vibrational energy dissipation of the ${\nu}_1$ mode of NCO in $Mb^{III}$NCO and $Hb_{III}$NCO.
Kim, Hee-Kwon;Ma, Kyung-Cheol;Kim, Myeong-Seok;Bang, Geuk-Pil;Kim, Joung-Keun;Park, Min-Soo
Korean Journal of Environmental Agriculture
/
v.29
no.3
/
pp.282-286
/
2010
The present studies were carried out for three years from 2007 until 2009 to control nematode and to increase yield of cucumber by crashed-rape seed application at polyethylene film house. Crashed-rape seed has a lot of glucosinolate. Myrosinase decompose gulcosinolate into isothiocyanate and thiocyanate when crashedrape seed go to decay at soil. Those chemical compounds act on poison to nematode at soil. When the crashedrape seed treated at soil, an amount of thiocyanate at soil was risen up. Thiocyanate of plot treated with 200 and 400 kg crashed-rape seed per 10a was 30 and 40 mg/kg, respectively. Nematode(meloidogyne spp) population at soil was 13 to 17 nematodes per dried soil 300g. Yield of cucumber increased 6 to 15 percent to be compared with control. While, Nematode(meloidogyne spp) population of control plot were 463 nematodes per dried soil 300 g. This level was much higher than 150 nematodes which can be brought about injury to plant. Even if the more an amount of crashed-rape seed application, the higher yield of cucumber and control effect of nematode. Consider economical efficiency, 200 kg of crashed-rape seed per 10a was the most effective. Therefore, we suggest applying 200 kg of crashed-rape seed per 10a to control soil nematode when culture cucumber at plastic film house.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.