• Geomechanics and Engineering
• /
• v.29 no.1
• /
• pp.65-77
• /
• 2022

Determination of strength properties of intact rock using artificial cores has been considered in recent years. In this study, some relationships for estimating the static properties of dolomudstone cores of the Asmari reservoir were presented using artificial cores prepared from cuttings of two wells, southwest of Iran. For this purpose, first natural cuttings (NC) and 33 cores including dolomite limestone (dolomudstone), anhydrite and anhydrite dolomite were prepared between depths of 1714 and 2208 meters. Petrographic, physical, mechanical and dynamic tests were performed on cores, NC and artificial cuttings (AC) which was prepared from the residuals of dolomudstone cores. For preparing the artificial cores, the average porosity of the dolomudstone cores was considered and determined using four methods. Artificial and natural cuttings were classified as dolomite limestone and dolomite limestone to calcareous dolomite, respectively. Using ordinary Portland cement (OPC), water, AC and NC artificial cores were prepared. Results of evaluating the proposed relationships using statistical criteria showed that the static properties of the artificial cores can be used to predict the static properties of the dolomudstone cores.

• Korean Journal of Environment and Ecology
• /
• v.21 no.6
• /
• pp.544-553
• /
• 2007

This study is focused on the cultivation of seedlings and cuttings of roundleaf chastetree(Vitex rotundifolia L. f.) according to the sorts of soil and fertilization methods. The results are summarized as follows: When roundleaf chastetree seedlings(aged 1-0) and cuttings(aged 1-0) were cultivated in three different kinds of soil- sand, granite soil, and yellow silt- without any fertilization, 70% of the seedlings survived in sand and granite soil, and 35% did in yellow silt; 90% of the cuttings survived in granite soil and 80% did in sand and yellow silt. The general growth of both seedlings and cuttings was good in granite soil, and sand but relatively inferior in yellow silt. Seedlings showed good stem growth while cuttings had fine root growth. In case of cultivation of seedlings with different kinds and quantities of fertilizer adjusted and with granite soil as basic soil, seedlings and cuttings survived in the experimental section where only the organic fertilizer was used as basic fertilization; in contrast, seedlings grown in the experimental section were all dead where both inorganic and liquefied fertilizer were used. Cuttings showed considerably higher survival rates than seedlings at the experimental fertilization section; particularly, the survival rate of cuttings was twice as much as that of seedlings at the experimental section with low fertilization. This study results revealed that cuttings are desirable than seedlings in general rootage, growth, adaptability to soil, and cuttings have lower demand for soil fertility in time of growing roundleaf chastetree saplings.

• The Plant Pathology Journal
• /
• v.23 no.3
• /
• pp.223-225
• /
• 2007

Many plant growth-promoting rhizobacteria (PGPRs) have been known for beneficial effects on plants including biological control of soilborne pathogens, induced systemic resistance to plant pathogens, phytohormone production, and improvement of nutrient and water uptake of plants. We developed a simple and rapid method for screening potential PGPR, especially phytohormone producing rhizobacteria, or for analyzing their functions in plant growth using cucumber seedling cuttings. Surface-sterilized cucumber seeds were grown in a plastic pot containing steamed vermiculite. After 7 days of cultivation, the upper part 2 cm in length of cucumber seedling, was cut and used as cucumber cuttings. The base of cutting stem was then dipped in a microcentrifuge tube containing 1.5ml of a bacterial suspension and incubated at $25^{\circ}C$ with a fluorescent light for 10 days. Number and length of developed adventitious roots from cucumber cuttings were examined. The seedling cuttings showed various responses to the isolates tested. Some isolates resulted in withering at the day of examination or in reduced number of roots developed. Several isolates stimulated initial development of adventitious roots showing more adventitious root hair number than that of untreated cuttings, while some isolate had more adventitious root hair number and longer adventitious roots than that of untreated control. Similar results were obtained from the trial with rose cuttings. Our results suggest that this bioassay method may provide a useful way for differentiating PGPR's functions involved in the development of root system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.72-77
• /
• 1982

To develop a new propagation method of Korean ginseng (Panax ginseng C.A. Meyer) by cutting, stem cuttings with leaflets obtained from ginseng seedlings were planted in rooting media treated with three levels of NAA concentration. NAA solution of 1.0 ppm was the most effective for the rooting of ginseng stem cuttings as well as for root growth after initiation of the roots from cuttings. A mixture of sand and leaf compost as a rooting medium for ginseng stem cuttings showed the best results in rooting percentage of cuttings and root growth after rooting. An acril film cap covering was very effective to prevent water loss by transpiration from the leaflets of stem cuttings and for rooting and root growth after rooting. Cuttings of leaf petiole with 5 leaflets from 2 year old ginseng plants showed good rooting as well as root growth after rooting in a mixture of sand and leaf compost treated with 1.0 ppm NAA.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.3
• /
• pp.175-185
• /
• 1995

This experiment was carried out to investigate the optimum rates of animal excreta(cattle slurry-N) for the highest dry matter production and improve the nutritive values of reed canarygrass with different cutting frequency. The results are summarized as follows; The highest relative dry matter yields for annual dry matter yield were 42.2% and 45.2% at 3rd cut in 3 and 4 cuttings, and 34.7% at 4th cut in 5 cuttings, respectively. The annual dry matter yields of non slurry-N application plot showed were from 6.8 tons to 8.0 tons/ha in all cutting frequencies. The highest annual dry matter yield obtained was in 3 cuttings. The annual dry matter yield increased with an increase of applied rates of slurry-N in all cutting frequencies. Annual dry matter yield was produced by 3.3 tons/ha at rates of 90 kg N/ha/cut in 3 cuttings, and more 1.7 tonsha and 2.4 tons/ha at rates of 30 kg N/ha/cut in 4 and 5 cuttings than that of non slurry-N application plots. The contents of crude protein were 12.01% and 15.0% at rates of 90 kg N/ha/cut in 3 and 4 cuttings, and 16.59% at rates of 120 kg N/ha/cut in 5 cuttings, respectively. On the contrary, the content of acid detergent fibre(ADF) showed the lowest values at same rates of slurry-N application in each cutting. J. The average content of crude protein was significantly increased with cutting frequencies, and they were 11.43%, 13.53% and 15.53% in 3, 4 and 5 cuttings, respectively. The average contents of acid detergent fibre(ADF) were 40.27%, 40.53% and 37.06% in 3, 4 and 5 cuttings. The values of 5 cuttings were significantly lower than other cutting frequencies, but the values of acid detergent fibre(ADF) was not significantly different between 3 and 4 cuttings. 6. The efficiency of dry matter production to slurry-N application rates showed the highest values of 18.9 kg and 15.7 kg DM/kg N at rates of 30 kg N/ha/cut in 3 and 5 cuttings, and 16.3 kg DM/kg/ N at rates of 90 kg N/ ha/cut in 4 cuttings. The efficiency of total nitrogen yield to slurry-N application rates were the highest values of 0.51 kg and 0.43 kg W k g N at rates of 30 kg N/ha/cut in 4 and 5 cuttings, and 0.52 kg TN/kg N at rates of 90 kg N/ha/cut in 3 cuttings, respectively. 7. The ranges of economic slurry-N rates were estimated as the 107.2-151.0 kglha, 359.1-375.7 kgha and 160.3-236.9 kg/ha in 3, 4 and 5 cuttings, and marginal dry matter yields were 9.6-10.0 tons/ha, 12.4-12.6 tons/ha and 9.0-9.7 tons/ha in 3, 4 and 5 cuttings, respectively. 8. The limiting sluny-N application rates to maintain the highest dry matter yields were estimated to be 420.0 kg/ ha, 440.6 kg/ha and 666.3 kg/ha in 3, 4 and 5 cuttings.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.141-152
• /
• 2011

Cuttings based on water media are relatively low-cost and easy to manage compared to those based on soil media. Nevertheless, species that root out in water media are very few. Water-medium rooted cuttings are not widely used. In water media, the survival rate of cuttings is high, but in many cases, they only form callus while not rooting. If cuttings with callus formed in a water medium were to root and survive after being transplanted in soil, water-medium cuttings could be used as an important means of propagating landscape tree species. In this study, cuttings of Ternstroemia japonica having various reactions to water media were soaked in different types of water media. Their callus formation and rooting conditions were analyzed. The water-medium cutting swere then transplanted in soil, and conditions for their survival were examined. The study concluded: 1. Cuttings that only formed callus in water media were able to root and survive after being transplanted. 2. Cuttings with satisfactory callus formation showed more satisfactory survival conditions than those with unsatisfactory callus formation. 3. Cuttings rooted in water media showed a high survival rate of 96.6% after being transplanted. 4. Water-medium cutting of Ternstroemia japonica proved to be more effective in Late July or August than in late June. 5. Cuttings pre-treated in 50ppm-IBA for 24 hours showed better survival conditions than those that were not pre-treated inIBA. 6. Cuttings pre-treated in 50ppm-IBA for 24 hours and soaked in water media with 0.02% atonic, 0.02% polyoxin, and 0.01% polyoxin showed a rooting and survival rate of 80 to 85%. Regardless their low rooting rate, water-medium cuttings can show a high survival rate when these factors are considered: proper cutting time, plant hormone treatment, and types of water media. Accordingly, water-medium cuttings will emerge as major means of propagating landscape tree species that require small volumes of multi-species.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.129-136
• /
• 2012

This study was conducted to develop an efficient mass propagation method for the mature $Prunus$ $yedoensis$ Matsumura (43 to 58 years old). Cutting was conducted depending on cutting time, auxin treatments (IBA and NAA treatments mixed with talc powder), and cuttings position on shoots in a plastic house equipped with a fog system without heating. Rooted cuttings were transplanted to a nursery bed, and their growth characteristics were investigated in order to check whether the cuttings are successful or not for roadside tree planting. The average rooting rate was highly significant ($P$ < 0.0001) in all treatments: cutting on June 1st (61.4%) was more than two times greater in rooting rate than that on August 1st (23.6%); IBA 1,000 $mg{\cdot}L^{-1}$ (90.8%) and IBA 500 $mg{\cdot}L^{-1}$ (89.2%) showed much greater rooting rates than those of the other treatments; upper part of the cuttings treated with IBA 1,000 $mg{\cdot}L^{-1}$ showed the highest rooting rate, 96.7%. The interactions among treatments in the average rooting rate were also significant. There were significant differences ($P$ < 0.0001) among the auxin treatments in the survival rate of leafed cuttings transplanted to a nursery bed. The average survival rate was 46.5%, and IBA 1,000 $mg{\cdot}L^{-1}$ treatment was the highest in leafed cuttings 79.2%, but most of leafless cuttings were dead. There were significant differences ($P$ < 0.0001) among the cuttings, grafts, and in the seedlings height, diameter at root collar, the number of roots, branches, and leaves, etc., and the cuttings was the best. We can expect a possibility of mass propagation of improved $P.$ $yedoensis$ Matsumura and a high planting survival rate through the transplanting of cuttings to a nursery bed in which the cuttings should be the following conditions: cutting in June to July, use of the upper part of cuttings, IBA treatment, and rooting in August in a cutting-greenhouse equipped with a fog system.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2001.04b
• /
• pp.79-80
• /
• 2001

This study was conducted to estimate rooting and shooting in single-node cuttings (SNC) of roses 'Rote Rose' and 'Teresa' to several conditions: growth stage, node position, and leaf area of cutting, so that single-stemmed roses (SSR) could be used in rose factory system. There was no effects of growth stage of flowering shoots far cutting on the rooting and shooting of SNC in both of the two cultivars. However, the node position and leaf area of cuttings significantly affected the rooting and shooting of SNC: the speed was accelerated with larger leaf area and upper node cuttings, but the rate showed little difference as above 95%. Based on above results, rooting and shooting in SNC was forced by leaf area mainly, followed by node positions. On the other hand, flowering rate of shoots from SNC was improved mainly with larger leaf area in cuttings. Shoots of 45cm-longer, qualified for rose factory system, increased with lower node and larger leaf area significantly. Therefore, it could be said that the potential growth of shoots from SNC would be influenced mainly by leaf area, followed by node position on cutting.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.3
• /
• pp.143-151
• /
• 1998

To develop restoration technologies of natural environment, which is destroyed through the urbanization, industrialization, and the increase of leisure industry, the development of environmental restoration material and those application is greatly needed. Concerning this current issue, an experiment has been conducted to test and an experiment has been conducted to test and analyze the conditions of nutritonal propagation of willow cutting, which is known as a plant with rapid propagation and good growth capability under bad soil conditions and its wide ecological amplitude. 24 various kinds of willow cuttings -2~6 cuttings for each species -were placed into the earth for 57 days and measured the lengths and the diameters of willow cuttings, the possibility of root formation, the total number, and the total length of new shoots and roots. 23 among 24 willow cuttings tested were showing a great growing capacity and a number of new shoots and roots were observed in a relatively short time. This proved that salix is an adequate plant material for quick environmental restoraton . Besides, those willow cuttings could be classified for different site conditions through comparing the ratio of the underground part to the aboveground in total length. The results are as follows; S. dependens, S. matsudana, S. babylonica are the most suitable species for quick vegetaton and S. gracilistyla,S. myricoides,S. alba 'sercia' for erosioni control.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.300-308
• /
• 1996

This study was conducted to identify factors involved in rooting of Japanese larch cuttings. Cuttings were taken every week from June 24th to July 25th before and after the 10th of July which supposed to be best time for cutting. The content of IAA, carbohydrate, nitrogen and inorganic elements such as $Mg^{{+}{+}}$, $K^+$ and $Ca^{{+}{+}}$ within cutting materials were analyzed. After the cuttings were planted, the root development was observed every week. Cuttings of easy-to-root clones were higher in IAA contents than the cuttings of hard-to-root clones at the time of cuttings were taken. There were significant differences in moisture content of cuttings taken on June 24th and July 25th between easy-to-root and hard-to-root clones, however no significant differences in moisture contents were observed between them taken on the 8th and 15th of July which supposed to be the best time for cutting. Inorganic matters and carbohydrate contents of cuttings taken from hedged trees were higher than those of non-hedged trees. The ratios K/C and C/N of cuttings taken from hedged trees were higher than those of non-hedged trees. Cuttings taken from easy-to-root clones showed higher content of carbohydrate and nitrogen than those of hard-to-root clones. The contents of inorganic elements, such as $Mg^{{+}{+}}$, $K^+$, and $Ca^{{+}{+}}$ in cutting taken from hard-to-root clones were slightly higher than that of easy-to-root clones. The ratio C/N and K/C of cuttings which were taken from easy-to-root clones have shown a similar trend of carbohydrate and nitrogen. These data indicate that there was no one dominant factor that affect rooting of cutting, but many factors such as contents of IAA, carbohydrate, nitrogen, phosphate, and ratios of C/N and K/C appeared to affect on rooting of cuttings variously. Most of root initials were formed from phloem tissue within one week after cutting, and few were formed from callus tissue. Root primordia were developed from root initials within two weeks after cutting, and most of new roots were developed from root primordia within about five weeks after cutting.