• Title/Summary/Keyword: Cutting rate.

Search Result 1,027, Processing Time 0.034 seconds

A Study on a Wind Turbine Data Logger System based on WiFi for Meteorological Resource Measurement (기상자원 측정을 위한 와이파이 기반의 풍력용 데이터로거 시스템에 관한 연구)

  • Jung, Se-Hoon;Sim, Chun-Bo
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.10 no.1
    • /
    • pp.55-64
    • /
    • 2015
  • Wind turbine market is showed height growth rate of about 30% for year, and is increasingly growing. Total rate of domestic wind turbine installation is showing share of 0.2% of the global market that is 380MW. However, wind turbine installed in domestic are foreign product more than 90%. Similarly, Datalogger of pretest system for ocean wind turbine plant installation has been leaked huge cost to abroad by mostly abroad company product. In this paper, we proposed pretest weather resource measurement system for efficiency and investment cost cutting of wind turbine construction work. Preset weather resource measurement system is ocean weather resource measurement datalogger based on wireless communication(wifi) that have consist of hardware and software(wind rose) that is able to monitoring as datalogger of wireless bridge and battery state, wind direction, wind speed, temperature, humidity, radiation around weather tower and is able to analysis of measured data.

Effects of Chemicals, Decoating and Low Temperature Treatments on Seed Germination in Lycoris aurea (화학약품처리(化學藥品處理), 종피제거(種皮除去) 및 저온처리(低溫處理)가 개상사화(想思花)의 종자발아(種子發芽)에 미치는 영향(影響))

  • Park, Yun-Jum;Chung, Youn-Ohk
    • Korean Journal of Medicinal Crop Science
    • /
    • v.4 no.2
    • /
    • pp.172-177
    • /
    • 1996
  • The influences of testa-removal of seed, partial cutting of embryo, xylene treatment, growth regulator, chemical treatment and low temperature treatment on the seed germination of Lycoris aurea were investigated. The germination rate of the testa-removed seeds was higher than that of the whole seeds, and the seeds treated by testa-removal+xylene was 63% of germination. $GA_3$ was more effective than kinetin treatment, and seeds treated with $GA_3$ 200ppm showed 60% of germination. $KNO_3$ was more effective than KOH treatment, and seeds treated with 0. 1% $KNO_3$ was 76% of germination. The seeds, stored for two months at $5^{\circ}C$, showed the highest germination rate with 93%

  • PDF

Analysis of Noise Special Medical Examination and Work Environment Monitoring Results (소음에 대한 특수건강진단 및 작업환경측정 결과 분석)

  • Kim, Kab Bae;Park, Hae Dong
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.25 no.1
    • /
    • pp.5-12
    • /
    • 2015
  • According to the analysis of special medical examination and work environment monitoring data, the rate of C1 and D1 on noise hazard exceeded 90 % among those of total hazardous factors. The rate of company exceeding noise exposure limit was also more than 90 %. The analysis result shows that main ages diagnosed with C1 and D1 was age of 50s. The majority scale company having workers diagnosed with C1 and D1 was the companies employing 5~49 workers. Types of industries which have a large number of companies exceeding noise exposure limit were automobile and trailer manufacturing, metal processing industry and primary metal manufacturing. A large number of work processes exceeding noise exposure limit were forming and processing work, cutting and bending work and grinding. To reduce the number of company exceeding noise exposure limit, the reduction counterplan should be focused on the type of industry and the work process which exceeded noise exposure limit frequently. However, the reduction counterplan is preemptively necessary to the type of industry and the work process which exceeded noise exposure limit consecutively if the purpose of reduction counterplan is not to merely reduce the number of company exceeding noise exposure limit but to abate workers' suffering from noise.

The Effect of Environmental Tax Policy on Economic Growth : An Endogenous Growth Approach (친환경 조세정책이 경제성장에 미치는 영향 : 내생적 성장모형을 중심으로)

  • Kang, Sung Hoon;Hong, Jong Ho
    • Environmental and Resource Economics Review
    • /
    • v.17 no.3
    • /
    • pp.61-89
    • /
    • 2008
  • In this study, by extending the model proposed by Fullerton and Kim(2006), we explored the tax interdependency effect to examine the relationship between environmental tax and economic growth. The theoretical model shows that environmental tax cannot always stimulate economic growth if other taxes such as labor or income tax are distorted by environmental taxes. However, environmental tax can boost economic growth if cutting distortionary taxes offset the distortion of taxes, or improvement of abatement knowledge can sufficiently reduce the cost of production. An empirical analysis using 14 OECD countries shows a positive relationship between the increase of implicit energy tax rate and the increase of implicit income tax rate. Meanwhile, empirical analysis does not provide enough evidence to claim that the increase of implicit energy tax decreases implicit labor tax. We can presume that environmental tax policy in Europe did not necessarily mitigate the burden of labor tax.

  • PDF

Spreading Processes and Features of School Environmental Education in Korea, the People's Republic of China and Japan (한.중.일 학교 환경교육의 전개와 특색)

  • Suwa, Tetsuo
    • Hwankyungkyoyuk
    • /
    • v.18 no.2 s.27
    • /
    • pp.113-125
    • /
    • 2005
  • Korea, China and Japan show distinct features in their school environmental education, which are derived from their own spreading processes. Japanese school environmental education has developed as a result of assimilating of anti-pollution education and nature education, and has a feature that makes much of nature experiences. The introduction of 'Period for Integrated Study' in 2002 seems to begin activating Japanese school environmental education. Chinese school environmental education started in higher education institutions around the middle of 1970's, and has a feature that makes a point of scientific approach, even in primary education schools. The two government ordinances,'National Action Program for Environmental General Knowledge ($1996{\sim}2010$)' and 'Educational Scheme of Environmental Theme Study for Elementary and Secondary School Students' issued in 2003, gradually promote school environmental education in China. It is remarkable that Science and Technology Centers for Youth and also increasing environmental NPOs often support environmental activities in elementary or secondary schools. The most notable feature of Korean school environmental education is that 'Environment' has already offered as a regular elective subject in junior high school, and official 'Environment' textbook has published since early 1990's. Though, the adoption rate of 'Environment' is not yet so high. Each country's peculiar issues are as follows. Japan: (1) Students often lack basic knowledge about environmental important problems. (2) 'Period for Integrated Study' is now threatened with cutting hours by the idea of increasing periods for basic subjects to keep high achievement. China: (1) There are large regional differences and school distinctions in operation of environmental education. (2) Adult environmental education needs to be expanded, because the most part of Chinese have no experience of school environmental education. Korea: (1) The relationship between the administrative division which plans school environmental education and teachers group is not quite well. The adoption rate of 'Environment' in junior high school needs to be improved. The training of many teachers for environmental education instructors may be the most important and effective cooperative action among Korea, China and Japan, and for that purpose we ought to work on making a better handbook for instructors, at first.

  • PDF

A Survey of the Cost Benefit Analysis to R&D Projects of Selected Laboratories. (연구개발프로젝트의 비용효과분석 활용 실태 - 주요 기업연구소의 조사결과를 중심으로 -)

  • 서현진
    • Proceedings of the Technology Innovation Conference
    • /
    • 1998.06a
    • /
    • pp.38-56
    • /
    • 1998
  • We are faced with the crisis of the R&D investment because of the effects of the IMF conditions. Most of the laboratories are going to restructure by the cutting off of money, man power and the reduction of R&D thema. Therefore it is necessary to allocate the R&D resources effectively to the R&D projects. The evaluation and the selection of the R&D projects have been recognized as the most important process for the allocation of the R&D resources. The result of the KITA(1997) shows that the commercial success rate of the R&D from new-product brain storming is only 5.8%. This study aims to analyze the actual conditions of the cost benefit analysis(CBA) of R&D projects of selected laboratories and to study measure methods of the R&D benefits. The research method of this study reviews the CBA of R&D firstly, and surveys 200 selected high ranking labs of the R&D expenditures. For the comparison of the results between '87 and '97, this survey used the same questionaries for each year. As the result of the survey only 27 labs(response rate 13.5%) responded. The result of the '97 survey is as follows : The CBA is used by 44% of responding labs. The economic evaluation method for the R&D project selection is used by 48% of labs and this numbers increased by over 10 percents points compared with the result of '87. The CBA is used for about 40% about each of the budget preparing and the budget analysis, and by 30% of labs to analyze sales and expenditures of the overall period of the project. As the measurement of benefits of R&D projects, 30% of labs responded that it is impossible to measure the benefits, and 20% of labs measured the benefits between sales and expenditures of the R&D project.

  • PDF

A Study on Adaptive Sine Soft Clipping Method for PAPR Reduction in OFDM System (OFDM 시스템의 PAPR 감소를 위한 Adaptive Sine Soft Clipping 기법에 관한 연구)

  • Yoo, Sun-Yong;Kim, Wan-Tae;Jo, Sung-Jun
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2007.10a
    • /
    • pp.340-343
    • /
    • 2007
  • OFDM (Orthogonal Frequency Division Multiplexing) system is robust to frequency selective fading and narrowband interference in high-speed data communications. However, an OFDM signal consists of a number of independently modulated subcarriers, which can give a large PAPR (peak-to-Average Power Ratio) when added up coherently. In this paper, we propose a new PAPR reduction method using Adaptive Sine Soft Clipping (ASS Clipping) to solve the PAPR problem. The proposed method reduce the PAPR and out-of-band spectrum by cutting down high frequency components. From computer simulation results, we analyze the PSD (Power Spectral Density) and BER (Bit Error Rate) performance as well as PAPR reduction performance when the ASS Clipping method is applied to OFDM system.

  • PDF

Comparison of the quantity estimations from the design phase and the settlement quantities of construction field to improve the extra rates of bar splice (철근 이음조정률의 개선을 위한 설계견적 수량과 현장시공 정산 수량의 비교분석 연구)

  • Kim, Sang-Yeon;Choi, Bo-Mi
    • Land and Housing Review
    • /
    • v.8 no.4
    • /
    • pp.257-266
    • /
    • 2017
  • LH has been using ultra high strength reinforcing bars (SD500 and SD600), since 2011. Such a change requires an adjustment of the old extra rates of bar splice to reflect use of ultra high strength reinforcing bars, as these rates had been set based on SD400 bars. It is particularly difficult to calculate precisely rebar lap-splice locations for large areas, such as those in apartment buildings. This research aims to adjust the extra rates of bar splice to reflect a reasonable rate; the rebar lap-splice length is not an exact estimation, but instead, an extra rates of bar splice is set and the rebar lap-splice length is increased by 2% (D 10) - 7% (025) depending on the bar size. The subjects of this study are LH apartments undergoing frame construction. We studied the quantity estimations from the design drawings, and analyzed the settlement quantities of construction field. The results of the study revealed that, when each of the quantities are analyzed, consider adjusting the extra rates of bar splice of some rebar to 1% - 3.5%. This was caused by an overuse of reinforcing bars in onsite construction and the use of supporting bars that have not been reflected in the documents, among other reasons. Based on the results of our study, an improvement plan for the current extra rates of bar splice seems to be necessary, cutting or raising the rate depending on the analysis of the data. Through this study, we expect to contribute to the calculation of reasonable construction costs, improvements in the quality of rebar work, and improvements in the capacity of design techniques for apartment buildings.

A Survey of the Cost Benefit Analysis to R&D Projects of Selected Laboratories. (연구개발프로젝트의 비용효과분석 활용실태 - 주요 기업연구소의 조사결과를 중심으로 -)

  • 서현진
    • Journal of Technology Innovation
    • /
    • v.6 no.2
    • /
    • pp.208-237
    • /
    • 1998
  • We are faced with the crisis of the R&D investment because of the effects of the IMF conditions. Most of the laboratories are going to restructure by the cutting off of money, man power and the reduction of R&D theme. Therefore it is necessary to allocate the R&D resources effectively to R&D projects. The evaluation and the selection of R&D projects have been recognized as the most important process for the allocation of the R&D resources. The result of the KITA(1997) shows that the commercial success rate of the R&D from new-product brain storming is only 5.8%. This study aims to analyze the actual conditions of the cost benefit analysis(CBA) of R&D projects of selected laboratories and to study measure methods of the R&D benefits. The research method of this study reviews the CBA of R&D firstly, and surveys 200 selected high ranking labs of R&D expenditures. For the comparison of the results between '87 and '97, this survey used the same questionary for each year. As the result of the survey only 27 labs(response rate 13.5%) responded. The result of the '97 survey is as follows : The CBA is used by 44% of responding labs. The economic evaluation method for the R&D project selection is used by 48% of labs and this numbers increased by over 10 percents points compared with the result of '87. The CBA is used for about 40% about each of the budget preparing and the budget analysis, and by 30% of labs to analyze sales and expenditures of the overall period of the project. As the measurement of benefits of R&D projects, 30% of labs responded that it is impossible to measure the benefits, and 20% of labs measured the benefits between sales and expenditures of R&D projects.

  • PDF

A Study for Determining the Rehabilitation Method Group using NHPCI on Asphalt Concrete Pavement of National Highway (국도 아스팔트 포장의 NHPCI(National Highway Pavement Condition Index)를 활용한 보수공법그룹 결정에 관한 연구)

  • Son, Hyeon Jang;Kwon, Soo-Ahn;Lee, Jae Jun;Baek, Cheolmin;Lim, Jae Kuy;Sin, Hyun Jin
    • International Journal of Highway Engineering
    • /
    • v.15 no.2
    • /
    • pp.1-9
    • /
    • 2013
  • PURPOSES : The PMS(Pavement Management System) has been utilized in order to efficiently allocate the limited budget for the maintenance of national highway system. In the PMS of national highway, surface pavement condition is evaluated by using the VI (Visual Index). However, the VI is determined only by considering the cracking rate (%) and rut depth (mm), which is not reflecting the IRI (International Roughness Index) that is known as an important factor of pavement performance. In this study, the NHPCI (National Highway Pavement Condition Index) which includes the cracking rate (%), rut depth (mm), and IRI (m/km) is suggested for determining the rehabilitation methods group. METHODS : First, the rehabilitation methods performed between 2008 and 2010 on the national highway is classified and then, NHPCI is determined for each rehabilitation method. Next, the NHPCI for each rehabilitation method is grouped through the interval estimation of the population mean and T-test analysis. RESULTS : According to NHPCI range, the rehabilitation methods are divided into four categories: Not Required, Preventive Maintenance, Overlay Treatment (with or without cutting), and Full-scale Treatment (i.e., reconstruction). CONCLUSIONS : Based on this study, it is recommended that the appropriate NHPCI range should be determined through the combination of the rehabilitation categories and Decision Procedure of Pavement Distress Condition Visual Index.