• KSBB Journal
• /
• v.9 no.1
• /
• pp.26-34
• /
• 1994

When effects of exogenous hormone on hairy root cultures of Raphanus sativs cv. Chungpihongsim examined, the highest anthocyanin synthesis and disorganization were observed when 2, 4-D was supplemented to the culture medium Cytokinins showed early weak induction after transfer and ABA showed inhibitory effect and GA3 showed no effects in anthocyanin synthesis. Hormones except for 2, 4-D in 1 mg/$\ell$ concentration did not induce disorganization of hairy root and retarded growth of hairy root. Time-course changes in anthocyanin synthesis, phenylalanine ammonia-lyase activity and chalcone synthase activity were examined in culture condition contalning 2, 4-D and kinetin. In a medium containing 2, 4-D, anthocyanin synthesis began to increase on the 9th day and reaching maxima on the 18th day after transfer. Maximum peak of PAL activity appeared on the 3-9th day and another minor peak appeared on the 18th day. CHS activity increased from 9th day, reaching maximum on the 18th day and remained at a relatively high level for culture period. In a medium containing kinetin, anthocyanin synthesis increased temporarily on the 6-9th days, early days after transfer and maintained at a low level for remaining culture period. Peak of PAL activity appeared on the 6th day and CHS activity increased from the 6th days, reaching maxima about 18th day and remained at a relatively high level. In particular, addition of kinetin after preculture in hormone free medium for 2 weeks which was thought of wound healing period showed no effects in anthocyanin synthesis. This results showed that stimulation of anthocyanin synthesis by 2, 4-D and kinetin was meaningfully connected with changes of PAL, CHS activity, and then suggested rate-limiting role of CHS on anthocyanin synthesis in that there is close correlation between anthocyanin synthesis and changes of CHS activity in time-course. Besides, it is considered that cytoklnins involving kinetin stimulated anthocyanin synthesis be due to "wound response" by cutting of young roots, and that difference in time-course peak and PAL, CHS activities expressed by 2, 4-D and kinetin result from occurrence of isozyme which have different regulatory mechanism.mechanism.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.2
• /
• pp.106-110
• /
• 2020

The purpose of this study was to evaluate winter annual forage crops for yield, and horse palatability under horse grazing during the fall and spring in Jeju. The winter annual forage crops such as Italian ryegrass(IRG), rye, and oat were planted in randomized block design in October 30. The horse grazing was initiated on March 17 of the following year. At the first cutting, the dry matter yield of rye was the highest with 4,600 kg/ha compared to the IRG and oat (p<0.05). But there were no significantly different in the yield of winter annual forage crops after the second and third harvests. The total dry matter yield showed rye 12,593 kg/ha, IRG 10,941 kg/ha, and oat 9,424 kg/ha respectively. The horse intake duration of the IRG was significantly higher than the oat and rye (p<0.05). In the first grazing and the second grazing, the intake duration of the IRG was 853.2 seconds and 989.4 seconds, respectively, with oat at 147.6 seconds, and 73.0 seconds, and rye at 89.4 seconds, and 33.18 seconds. The intake duration of IRG was longer than that of oat and rye (p<0.05). The intake rate of the IRG was 60.0% in the first and 82.8% in the second, and the average intake rate was 71.4%. When considering the maintenance of pastures and the palatability of horses, the IRG is the most suitable forage crop in winter annual forage crops in Jeju.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.2
• /
• pp.68-77
• /
• 2005

A characteristic of subtropical zones region MK-T2 compares with an gaeryangppong, and the 9-10 schedule the times when a leaf blooms to are fast, and ratio that a branch edge by the colds becomes lean showed 5.7%, and a growth of the new branch which went out delivers 67.2 cm, mulberry loaves of the new branch which went out, and 18.6, a form of a leaf is the 1.10 that length of a leaf grew more a bit than width of a leaf up. Thickness of a leaf is $228.2{\mu}m$, and an area is more similar than gaeryangppong as $225.6cm^2$. in plant taxonomy, the hair whom the style exists short with 0.7 mm, and go to the pistil head inside so as to be rare is distributed, and belong to Dolichostylae Pubescentes. The new branch cutting which executed without remedy processes was independent of a thickness of a case branch, and the form and 100% root was said, and an gaeryangppong compared with the fact that 10% root went out of 15 mm ideal, and was excellent very, and looked, a root went out a root the soil and water, all showed a characteristic to go out at central of a branch bases at 45% ratio. Length was 24.6 mm, and were water rate 78.8%, and mulberry of MK-T2 was carrying together sweetness and acidity to pH 4.7 while, besides, arrival was 19.21 Brix%. A larva period and pupa ratio, cocoon thickness ratio are almost similar to gaeryangppong, or weight of one cocoon, cocoon thickness, 20,002 cocoon quantity shows some results to drop, and be soft of a leaf, and feed value certifications are comparatively top-ranking. As a result of having analyzed amino acid of the 3rd day of 5th silkworm larva which bred to MK-T2, a collation absorbing an gaeryangppong went, and looked, but compared with a collation in case of tests to eat MK-T2, and looked, and the lie collations were not detected a difference at Leu, but MK-T2 tests were detected mutual almost similar amino acid creation. medical efficacy of the 3rd day of 5th silkworm larva ethanol extract which bred to MK-T2 and black results, histologic a case did not appear at HE dyeing about the kidney organization which extracted form the rats which ate a silkworm ethanol extract and dyeing all chemical organization immunity, and one step protein revelation became lower with almost unidentified levels.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.751-759
• /
• 2013

There is increasing interest in freshly cut products, that is, foods produced without washing and cutting. In this study, the quality of freshly cut sliced Deodeok was compared with that of what based on its washing methods. In bubble washing, the Deodeok rises to the water surface apace and is broken into centimeter sizes. Microbubble washing calls for the production of a great number of 0.1 mm-sized bubbles in anions-bearing water and their passing through a trumpet-shaped hole at a high pressure. To compare the product deterioration rates of the specimens, they were stored at $10^{\circ}C$ for 10 days. In the specimens washed with the control method and with hand washing, the deterioration rate was 80%; and in the specimens washed with bubble and microbubble washing, 20~30%. The L-value (an index of browning) was higher in the bubble and microbubble washing than in the control and the hand washing, which implies that browning was minimized during the storage. As for the viable cell and coliform group counts that were measured during the storage, the specimens washed with the control method showed the highest values. In contrast, the specimens washed with microbubble washing showed the lowest values. In the sensory test, the specimens washed with microbubble were highest in storage preference. In conclusion, the Deodeok that was stored after it was washed with microbubble washing was found to have had the best quality.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2017

Recently, building materials and air purification filters with eco-friendly charcoal are actively studying to reduce the concentration of radon gas in indoor air. In this study, radon reduction performance was assessed by designing and producing new panel-type activated carbon filter that can be handled more efficiently than conventional charcoal filters, which can reduce radon gas. For the fabrication of our panel-type activated carbon filter, first the pressed molding product after mixing activated carbon powder and polyurethane. Then, through diamond cutting, the activated carbon filter of 2 mm, 4 mm and 6 mm thickness were fabricated. To investigate the physical characteristics of the fabricated activated carbon filter, a surface area and flexural strength measurement was performed. In addition, to evaluate the reduction performance of radon gas in indoor, the radon concentration of before and after the filter passes from a constant amount of air flow using three acrylic chambers was measured, respectively. As a result, the surface area of the fabricated activated carbon was approximately $1,008m^2/g$ showing similar value to conventional products. Also, the flexural load was found to have three times higher value than the gypsum board with 435 N. Finally, the radon reduction efficiency from indoor gas improved as the thickness of the activated carbon increases, resulting in an excellent radon removal rate of more than 90 % in the 6 mm thick filter. From the experimental results, the panel-type activated carbon is considered to be available as an eco-friendly building material to reduce radon gas in an enclosed indoor environment.

• Korean Journal of Environmental Biology
• /
• v.35 no.3
• /
• pp.413-425
• /
• 2017

This manuscript describes the relationship between climate change and forest growth, forest species, carbon stocks, and tree mortality. 1) In the aspect of forest growth, the growth of major coniferous species, including Pinus densiflora, had a negative correlation with temperature. On the other hand, major deciduous oak species, including Quercus variabilis and Quercus mongolica, had a positive correlation with temperature. 2) When considered in the aspect of the forest species distribution, various models commonly showed a decrease in the distribution of coniferous species and an increase in oak species due to climate change in the medium to long term. 3) From the carbon stock perspective, there was a difference in the estimation according to the status of forest management. Most of Korean forests will mature to become over-matured forest after year 2030 and are estimated to produce approximately 410 million ton forest biomass until 2090 with the current cutting regulations for sustainable forest management announced by the Korean Forest Service. 4) In the forest mortality, the mortality rate of the major coniferous species showed a clear tendency to increase higher temperatures while it decreased for the oak species with no verification of statistical significance. Moreover, the mortality of the subalpine coniferous species was projected to progress rapidly. considering the overall impacts described above, there should be a management strategy for coniferous species that are relatively vulnerable to climate change. Moreover, a sustainable forest plan in the aspect of ecosystem services, carbon sequestration and storage, which is linked to global issues such as Sustainable Development Goals, ecosystem services and negative emission.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.203-209
• /
• 2009

Yield monitoring is one of a precision agriculture technology that is used most widely. It is spatial variability analysis of yield information that should be attained with yield monitoring system development. This experiment was conducted to evaluate spatial variability of yield and grain moisture content in rice paddy field, and their relationships to rice productivity. It is necessary to minimize sampling interval for accurate yield map making or to control cutting width of rice combine. Considering small rice plots such as $0.2{\sim}0.4$ ha, optimum size of sampling plot was below 15 m more than 5 m in with and length. In variable rate treatment field, average yield was similar, but yield variation was reduced than conventional field. Gap of yield by another plot in same field was bigger than half of average yield than yield variation was significantly big. Therefore yield measuring flow sensor must be able to measure at least 300 kg/10a more than 1000 kg/10a. Variation of moisture content in same field was not big and spatial dependance did not appear greatly. But, variation between different field is appeared difference according to weather circumstance before harvesting. Change of spatial dependence of yield was not big, because of field variation of moisture content is not big.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.4
• /
• pp.365-371
• /
• 2013

Purpose: In this study, we evaluated the physical and thermal properties of the compositions made by blending glass fiber (GF) of different contents into glass fiber polyamide-66, and investigated if the compositions applying to the glasses frame to replace the TR-90, which is polyamide-12 resin used as an injection-type spectacle frame material. Methods: To investigate the characteristics change of polyamide-66 (PA-66) compositions with the change of the content of glass fibers, we produced a composition of the content by using a twin-screw extruder. The mechanical strength of the composition production was measured and coating properties as well as cutting processability were evaluated. We evaluated the applicability of the glasses frame by comparison the results of new compositions with characterizations of traditional TR. Results: For the results of the characterization of Polyamide-66/GF composition, we found that the higher increase of content of the glass fiber, the less mold shrinkage rate, and the mechanical strength was increased. Tensile strength increased from $498kg/cm^2$ for 0 wt% of the content of the glass fibers to $849kg/cm^2$ for 30 wt% of the content of the glass fibers. As a result of a coating evaluation, the strength of coating was 4B in the GF 5wt% and 5B, which was extremely good coating characteristics, in the over than GF 5 wt%. Conclusions: In case that 30 wt% of the glass fiber was blended, the mechanical strength was greatly improved, the hardness was increased, injection temperature increased due to increase of the viscosity, and the flow mark of the product may occur. The paint coating of PA-66 blended with glass fiber was all excellent. With general evaluating physical properties and workability properties it was determined that around 10 wt% of the content of the glass fibers was possible to apply a spectacle frame.

• Korean Journal of Weed Science
• /
• v.14 no.4
• /
• pp.245-251
• /
• 1994

The initial growth and herbicidal responses of Scirpus planiculmis were examined under both laboratory and greenhouse condition. Initial growth of S. planiculmis at two different soils(soil A and B), was compared with the growth at normal paddy soil, and growth rates at two soils were 32% and 86% as compared to the growth rates at normal paddy soil. Two different soils were soil A(rice-uncultivable) and soil B(rice-cultivable). Transplanted(2.5 leaf stage) and direct seeded rice(Dongjinbyeo) could not grow at soil A. The growth of transplanted rice at soil B was almost same as the growth at normal paddy soil, but the growth of direct seeded rice was 50% of the growth at normal paddy soil. S. planiculmis among the perennial weeds was most tolerant to NaCl, and Cyperus serotinus, Eleocharis kuroguwai, Sagittaria pygmaea, Sagittaria trifolia, Potamogeton distinctus were followed. The intial growth rate of S. planiculmis was more rapid than C. serotinus. Cutting types and times of corm reduced 20-40% of the initial growth of S. planiculmis. During the initial growth of S. planiculmis, the growth of S. planiculmis was severly inhibited by the earlier removal of corm from seedlings, and it represents that the corm plays an important role in the initial growth of this species. Bentazone among 14 commercialized herbicides showed the best safety on direct seeded rice and the highest control effect agaist S. planiculmis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.684-696
• /
• 1995

A mutant for chalky endosperm and genetic male sterility (GMS) was newly developed in rice. The two characters were found to be controlled by single recessive gene which has pleiotropic effect, indicating that chalky seeds should be GMS seeds in segregating populations. Chalky seeds showed the same shape and size as normal seeds. However, starch composition of central part of endosperm was looser and shape of starch granules was rounder compared with normal endosperm, resulting in significantly lower grain weight, absolute density and grain hardness in chalky grains than in normal ones. Amylose content and gel consistency of chalky grains were much lower and harder, respectively. Male sterile plants showed much shorter plant height, poorer panicle exsertion and lesser panicle number compared with normal plants. Microspore abortion stage in pollen developmental process was observed as before meiosis. Male sterility of the mutant was stable regadless of temperature and day length. A system breeding hybrid rice using this mutant was discussed, comp ring with other systems utilizing cytoplasmic-genic male sterility(CGMS) and environment sensitive GMS(EGMS). Separation of GMS seeds in mixed seed bulks by specific gravity (1.14∼1.16g / cm3) was successful about 85∼90%. But some mixed normal plants were seemed to be easily removed by the apparent difference in growth characters at seedling stage. The highest natural outcrossing rate of this GMS line was as 17.3 % in a plot treated with 2-row pollinator, I-row GMS, and GA3 + cutting of flag leaf + pollen-scattering by rope.