• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.47-54
• /
• 2010

This study is progressed function ratio, it's trued taste by an experiment to present data for human work light weight aggregate development that use clink ash progressed liquid limit, small success limit, wear loss in quantity, sand equivalent, sieve cutting examination. 80:20's match of function rain examination is 1.4, and that use rubble aggregate as recyeled-panit lightweight aggregate's capacity ratio increases by 1.0 increase of function rain many. Also, examination multiplied delicate flavor gradually according to increase of the mixing rate, and absorption coefficient increased. This is judged by phenomenon that appear by special quality upper recycled-panit of polystyrene bid and porosity's increase between lightweight aggregate. It is case that use aggregate of wear loss in quantity is 13.5 in sand equivalent and a wear loss in quantity experiment and although case that mix 20% increases by 14.4, this phenomenon by weak tissue of lightweight aggergate be judged. When it's as a these experiment, the statue prevention floor of a street improvement specifications is prescribing so that satisfy by sand equivalent 20, CBR 10. This is showed result that this satisfies in quality standard all in match experiment ago that see.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.2
• /
• pp.107-112
• /
• 2011

This experiment was carried out to provide some information on the change of dry matter productivity and feed value (forage quality) according to growth stages of late-maturing variety, Hwasan 101, Italian ryegrass (Lolium multiflorum Lam.) in Grassland and Forages Division, National Institute of Animal Science, RDA, Suwon from 2000 to 2002. In Suwon, booting, first heading, full heading and flowering stages of cv. Hwasan 101 were May 8, 18, 28 and June 3, respectively. Dry matter (DM) and total digestible nutrients (TDN) yields of Hwasan 101 were tendency to be increased by the progress of growth. DM yield in first heading stage increased 50% more than DM 4,818 kg/ha of booting stage, and also DM yield in full heading stage was increased by 26% of DM 7,244 kg/ha of first heading. Crude protein content was decreased gradually by the progress of growth, which were 18.32, 15.12, 12.58 and 12.36% in booting, first heading, full heading and flowing stage, respectively. Acid detergent fiber and neutral detergent fiber contents was increased and in vitro dry matter digestibility decreased gradually with progress of growth, but there was no difference between full heading and flowering stages. Considering DM yield and feed value of Italian ryegrass, the suitable cutting times seems between full heading and flowering stage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.869-878
• /
• 2007

The purpose of this study was to investigate perception of risks among South Korean female college students within the process of purchasing apparel products through the Internet. The study was implemented by descriptive survey method using questionnaire and subjects consisted of 324 South Korean female college students. Findings of the study showed that the purchasing process particularly regarding delivery and security issues seemed to be a strong concern. On the other hand, unique selection such as apparel brands only available through the Internet was a strong appeal to 37.7% of subjects. Factor analysis profiled risk perception as: 1) Internet Shopping Selection Preference, 2) Delivery Problems and Lack of Security 3) Product Quality and Characteristics 4) Return Policy Difficulties and 5) Fair Prices. Discriminant analysis showed Factors 1, 2 and 3 were significant in helping to differentiate among Non-Purchasers, Fewer-purchasers and Many-Purchasers. Factor 1 and 3 helped differentiate among respondents relative to age range. Across all types of purchasers, offering unique selections of cutting edge fashions and improving risk perception relative to delivery and security concerns seemed important for gaining greater market share. Being able to delivery quality products and communicate product characteristics would be a powerful competitive edge to add to the incentive of convenience in shopping for apparel on the Internet.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.2
• /
• pp.28-36
• /
• 1979

One of most important problems in the Monsoon Asia today is the production of rice paddy to meet the needs of the ever increasing population. Diversemeans are being employed to meet this demand, both by increasing productivity of existing farm land and by bringing further areas into cultivation. The primary step in either field is to ensure that there is sufficient moisture in the soil to suit the paddy, and at the same this means that excess moisture has to be drained off the land, while in others irrigat ion has to be employed to bring sufficient water to an area. In view of the fact that the project comprises a huge amount of earthwork, it can be carried out by extensive use of construction machinery in order to shorten the period. As farm ditch has a comparatively small section with shallow cutting depth, inaddition, there is lack of access road in the field, the excavation equipment with bulldozer or tracter-shovel (backhoe) type are not applicable because there are mostly adapted for the excavation of deep and wide section. Mini-backhoe with its bucket width not larger than 0. 3m, and width of blade not larger than 1. 00m seems to be more adaptable. About 80% of excavation of ditch section will be done by the machinery while the other 20% of excavation together with the finishing of the section are supposed to be done by man-power. The embankment of ditch section can be compacted by the crawler of backhoe when it is moving along the ditch for excavation. However, Lowland paddy field in the Monsoon Asia are made particulary in rain season, therefore, heavy machinery is not easy excavation for ditch. It is very important to know exact ground support power of the working site and select machines with corresponding ground pressure. Ground support power is variable subject to quality and water content of soil and therefore selection of machines should be made duly considering ground condition of the site at the time of construction works. Farm ditches dug and compacted by mannual labar are of poor quality and subject to destruction after one or two years of operation. On the other hand, excavation and compaction by bulldozer is not practical for ditches. Backboe is suitable for slope land, but this is required cycle time of bucket excavation and dumped out. If a small-scale farm ditch trencher adaptable to lowland paddy field is invented, such a machine could greatly accelerate the massive construction work envisaged in many countries and thus significantly speed up the most difficult part of irrigation development and management in Monsoon Asia.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.116-125
• /
• 2009

This study is progressed function ratio, it's trued taste by an experiment to present data for human work light weight aggregate development that use clink ash progressed liquid limit, small success limit, wear loss in quantity, sand equivalent, sieve cutting examination. 80 : 20's match of function rain examination is 1.4, and that use rubble Goljae as ckink ash lightweight aggregate's capacity ratio increases by 1.0 increase of function rain many. Also, examination multiplied delicate flavor gradually according to increase of the mixing rate, and absorption coefficient increased. This is judged by phenomenon that appear by special quality upper clink ash of polystyrene bid and porosity's increase between lightweight aggregate. It is case that use aggregate of wear loss in quantity is 13.5 in sand equivalent and a wear loss in quantity experiment and although case that mix 20% increases by 14.4, this phenomenon by weak tissue of lightweight aggergate be judge. When it's as a these experiment, the statue prevention floor of a street improvement specifications is prescribing so that satisfy by sand equivalent 20, CBR 10. This is showed result that this satisfies in quality standard all in match experiment ago that see.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.849-857
• /
• 2012

This study was conducted to determine the effects of the pretreatment and infrared drying methods on the physicochemical properties and antioxidant activities of dried peaches. The pretreatment methods were the 30 min treatment of NaCl, vitamin C, and soluble Ca (1:5 w/v immersion ratio), and leaving them untreated before infrared drying at $55^{\circ}C$ for 20 hr. The moisture content was lower in the pre-treated group and was significantly lowest in the 0.3% NaCl. The titratable acidity and soluble solid content and acid ratio (SS/TA) were high for the vitamin C and soluble Ca groups. The browning degree and cutting strength of the dried peach were lower in the pre-treated group. The total sugar content in the 0.3% NaCl group was significantly higher than those in the vitamin C and soluble Ca groups. The Ca contents were more effective in the soluble Ca treated group and increased with higher Ca concentration. The sensory evaluation results indicated that the organoleptic scores for the overall preference were higher in the 0.1% vitamin C treated group. The phenolic compounds and ABTS radical scavenging ability were high for the 0.1% vitamin C and 0.1% soluble Ca treated groups. These results suggest that pretreatment affected the qualities of the dried peaches, showing that infrared drying can be applied to the production of high quality dried peach products.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.799-810
• /
• 2022

Welding work is a production work method widely used throughout the industry, and various types of welding technologies exist. In addition, many methods are being studied to automate these welding operations using robots, but in the ship manufacturing field, welding such as painting, cutting, and grinding is also the most common operation, but the manual operation ratio is higher than in other industries. Such a high manual labor ratio in the field of ship manufacturing not only causes quality problems and production delays according to the skill of workers, but also causes problems in the supply and demand of manpower. Therefore, this paper analyzed the reason why the automation rate is low in welding work at ship manufacturing sites compared to other industries, and analyzed the production process and field environment for small and medium-sized ship manufacturing companies that repeatedly manufactured with a small quantity production method. Based on the analysis results, it is intended to propose a robot system that can easily move between workplaces and secure uniform welding quality and productivity by collaborating simple welding tasks with humans. Finally, the simulation environment is constructed and analyzed to secure the suitability of robot system application to current production site environment, work process, and productivity, rather than to develop and apply the proposed robot system. Through such pre-simulation and robot system suitability analysis, it is expected to reduce trial and error that may occur in actual field installation and operation, and to improve the possibility of robot application and positive perception of robot system at ship manufacturing sites.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.2
• /
• pp.101-108
• /
• 2007

The object of this experiment was to investigate the effect of mixture which consist of different seeding rates and species on dry matter yield and quality in Daejon area. The field trials were conducted from 2003 to 2005 at Chungnam National University in order to evaluate the dry matter yield and quality of different mixture. The experimental design includes three mixture types: Conventional mixtures, CM{orchardgrass(Potomac) 50% + tall fescue (Fawn)20% + Kentucky bluegrass(Kenblue) 20% + white clover(Regal) 10%}, red clover + mixtures, RM{orchardgrass(Potomac) 40% + tall fescue(Fawn) 20% + Kentucky bluegrass(Kenblue) 10% + red clover(Kenland) 30%) and Turf type grass + mixtures, TM {orchardgrass (Potomac) 50% + turf type grass (tall fescue, Millennium 20% + Kentucky bluegrass, Midnight 10% + perennial ryegrass, Palmer III 10%) + white clover(Regal) 10%}. The average DM yield for 2 years of red clover+mixture(11,656kg/ha) was higher than those of the other mixtures(p<0.05). The content of crude protein and dry manu digestibility were higher in red clover+mixture than in other mixtures(p<0.05). but, the content of fibrous compounds like as NDF, ADF, cellulose and lignin were lower in red clover+mixture than in other mixtures(p<0.05). The crude protein dry matter(CPDM) yield was higher in red clover + mixture(2,832kg/ha) than in conventional mixture(2,372kg/ha) and turf type + mixture(2,266kg/ha)(p<0.05). The digestible dry matter (DDM) yield was higher in red clover + mixture(8,881 kg/ha) than in conventional mixture(8,255kg/ha) and turf type + mixture(7,314kg/ha)(p<0.05). In botanical composition at last cutting time in 2005, conventional mixture were maintained orchardgrass 45%, tall fescue 22%, Kentucky bluegrass 5% and white clover 24%. Red clover + mixture were maintained orchardgrass 40%, tall fescue 22%, Kentucky bluegrass 4% and red clover 31%. turf type + mixture were orchardgrass 37%, tall fescue 23%, Kentucky bluegrass 6%, perennial ryegrass 8% and white clover 24%, respectively. As summary, DM yields and quality of mixture species and seeding rates were observed significant difference. The results of this experiment indicated that red clover + mixture was more effective in enhancing the DM yield and forage quality in Daejon area.