• Journal of Korean Home Economics Education Association
• /
• v.9 no.1
• /
• pp.1-17
• /
• 1997

This study was conducted to obtain basic materials to improve the teaching method of Home Economics by theoretically looking into the supplementary teaching materials or implements usable in teaching Costume History area. And based on these data, the types and the applications of the supplementary teaching materials or implements highschool owned were examined. The subjects of this study were 111 Home Economics and Housework curriculum highschool teachers who give a lecture in the country by using self-administered questionnaires. SAS program was used to calculate frequency, percentage, average, standard deviation, and $\chi$(sup)2-test analysis. The results of the study were as follows； 1. Most of the highschool teachers used the school expenses for experiments in preparing the supplementary teaching materials or implements. 2. Of the supplementary teaching materials and implements concerning Costume History, visual implements such as slides and pictures were the mostly owned. CD and audio implements as cassette-tapes were not used. 3. Most of the teachers recognized the importance of the audio-visual teaching materials and implements concerning Costume History. 4. Among the audio-visual materials and implements concerning Costume History by which can be made by school teachers of Home Economics and Housework curriculum, the mostly used one was ‘cutting pictorials from magazines and newspapers’, and the next were ‘orbital materials’, and ‘copy the pictorials’, and the least was ‘recording from the radio’. 5. Most of the annual expenses assigned to the department of Home Economics was used in cooking practice, and the least of the expenses was assigned in buying audio-visual teaching materials and implements. 6. Time assigned to the area of Home Economics was for the most part one or two hours per week, and among this, time assigned to the history of western costume and the history ok korean costume was for the most part five to eight hours. 7. The areas that the highschool teachers felt difficulties mostly during clothing and textiles curriculum were ‘textiles’and the next were ‘knitting’, ‘western costume history’, and ‘korean clothing construction’. 8. The difficulties the highschool teachers faced while teaching Costume History were mostly that ‘the pictorials in the text is not fully explainable’, the next were ‘most of the supplementary teaching materials or implements are not owned’, ‘have to explain very much in a short time’, and ‘the lectural explanation is insufficient’. 9. The solution for the difficulties that the highschool teachers faced while teaching Costume History was mostly ‘the information, on which audio-visual materials and implements are distributed in the market, should be easy to obtain’, the next opinions were ‘the school should provide enough experiment and practice expenses to buy audio-visual materials and implements’, and ‘education facilities of the Home Economics Department should be the main aspects in improving the teaching methods and should give special lectures about it’.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.2
• /
• pp.155-160
• /
• 2003

This study was carried out to investigate propagation characteristics of seedling and rhizome in Epimedium koreanum NAKAI. Seed germination essentially needed after-ripening duration after harvesting for 250days and more by stratification. At $20^{\circ}C$ seed emergence days and root length were 8 and 0.46cm respectively. The above-ground part of E. koreanum grew until 60days after root cutting and the underground part of it grew after that time. The optimum amount of organic fertilizer was fermented cow-manure with husk 2,000kg/10a that showed $57.5cm^2$ in leaf area per plant, 6.2cm in new rhizome length, and 0.43% in icariin content, an index component of E. koreanum, while inorganic N-fertilizer made E. koreanum worse as it increased. In nutriculture extruded rice hull media was better for growth than perlite media at 1/2 NHRI solution.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.65-73
• /
• 2013

The information of cut slope in Mt. Jang area, Busan is investigated in order to construct the Slope Management System in Urban Area. The slope inspection sheet is made to record the characteristics for cut slopes, and that is capable to be inputted slope information systematically. The cut slopes in Mt. Jang area are consisting of 69 slopes. Most of the cut slopes are constructed in cutting slope and retaining wall (CR). The cut slopes located in housing facilities are 46 slopes, and the slopes located in school facilities are 12 slopes. The traverse of cut slopes is mainly ranged from 50 m to 150 m, and the height is mainly ranged from 10 m to 20 m. The slopes combined with soil and rock are mostly distributed. The retaining wall was installed in the toe part of cut slope in order to increase the slope stability, and the additional reinforcement methods including the anchor, drainage, preventing rock fall, shotcrete and vegetation were installed at the toe part of cut slopes.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.643-656
• /
• 2012

There has been an increase for the landslide areas and restoration expenses due, in large part, to the increased locally heavy rains caused by recent climate change as well as the reckless development. This study carried out a slope stability analysis by the application of distributed wetness index, using the GIS-based infinite slope stability model, which took the root cohesion effect into consideration, for part of Mt. Umyeon in Seoul, where landslide occurred in July 2011, in order to compensate the defects of existing analysis method, and subsequently compared its result with the case on the exploitation of lumped wetness index. In addition, this study estimated the distributed wetness index by methodology, applying three methods of specific catchment area calculation: single flow direction (SFD), multiple flow direction (MFD), and infinity flow direction (IFD), for catchment area, one of the variables of distributed wetness indices, and finally implemented a series of comparative analysis for slope stability by methodology. The simulation results showed that most unstable areas within the study site were dominantly located in cutting-area surroundings along with the residential area and the mountaintop and unstable areas of IFD and lumped wetness index method were similar while SFD and MFD provided smaller unstable areas than the two former methods.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.3_4
• /
• pp.407-417
• /
• 2003

The purpose of this study is to develop designs and patterns of a functional brassiere. For this purpose, women who have protruding and drooping breasts with 75B for their brassiere size were sampled. The fitting test for the fitness and function of test brassiere and control brassiere were carried out twice and compared the results from the both in terms of front, rear and side looks. The results of this study can be summarized as follows; 1. The results from measuring the level of sag and spread, and volume and protrusion of breasts shows that there are some distinctive differences in the measurements before and after wearing the test brassiere and the test brassiere is proved to be very effective in correcting breasts' shapes. 2. Front look: Since the two front cutting lines of the test brassiere served to have the curved main part pressing against the breasts, it could support breasts to more than satisfactory level. In addition, upperline panel and side panels of the test brassiere were found to have the upperline of the upper cup pressed against the breasts and at the same time it pressed and gathered the flab around upper part of the breasts and armpits that helped to rearrange the shape of the breasts. It is also proved that the two-pieced test brassier was found to be more functional in supporting the lower cup of the breasts. 3. Rear look: The test brassier was made up of two wide U-shaped wings with 2.5cm tape on its lower sides. Each wing has 4 lines and 3 hems (5.5cm). For this reason, the test brassiere was tighter and better fitted on its back. 4. Side look and entire look: The wings of the test brassiere might look wider than that of the control brassier which has conventional straight-shaped wings, but it was analyzed that the test brassiere held the upper and lower sides of the wings more effectively to be more pressed against the breast. Therefore, the test brassiere scored higher in terms of adjusting to body movements, while the control brassiere looked better in overall terms. 5. The functional brassier fur protruding and drooping breasts developed from the experiments of this study is a full side stretch brassiere which covers the entire breasts satisfactorily. The pattern drafting methods are suggested in to .

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.336-343
• /
• 2018

This study was carried out to provide the technology of silvicultural practices and management for regeneration by sprouts in the oak forests distributed on the slope. A total of 1,451 stumps were examined for the following factors relative to the occurrence and growth of the sprouts: stump height & diameter; location & quantity and root collar diameter & height of arisen sprouts. The amount of sprouts deceased or increased as the stump diameter increased. However, it tended to increase with stump height. The difference in the stump height between direction of the upwards (DUS) and downward slopes (DDS) was occurred, because oak trees were felled lower based on direction of the upward for convenience of regeneration works on the slope. The number of sprouts was higher relatively in the stumps of DDS. The rate of arisen side and root sprouts was higher in the stumps of DDS and DUS, respectively. The stump height difference was found to affect the arisen part of sprouts. As a result of comparing the sprouts growth according to the arisen part, there was no difference in the stump of DUS, but the growth of side sprouts in the stump of DDS was higher than that of the root. In order to improve the quality of oak sprouts considering the distribution characteristics of the oak forests in South Korea, it is necessary to apply the silvicultural technique, making the cutting surface parallel with the slope to reduce the stump height difference, to suppress arising side sprouts.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.3
• /
• pp.153-171
• /
• 2018

This study focuses on the investigation of geologic distribution and stratigraphy in the eastern part of Yeongdeok-gun, based on Lidar imaging, detailed field survey, microscopic observations, SHRIMP and LA-MC-ICPMS U-Pb age dating, and a new geological map has been created. The stratigraphy of the study area is composed of the Paleoproterozoic metamorphic rocks consisting of banded gneisses of sedimentary origin and schists ($1841.5{\pm}9.6Ma$) of volcanic origin, Triassic Yeongdeok plutonic rocks ($249.1{\pm}2.3Ma$) and Pinkish granites ($242.4{\pm}2.4Ma$), Jurassic Changpo plutonic rocks ($193.2{\pm}1.9Ma{\sim}188.8{\pm}2.0Ma$) and Fine-grained granites ($192.9{\pm}1.7Ma$), Formations [Gyeongjeongdong Fm, Ullyeonsan Fm. (~108 Ma), Donghwachi Fm.] of the Early Cretaceous Gyeongsang Supergroup and acidic volcanic rocks and dykes erupted and intruded in the Late Cretaceous, Miocene intrusive rhyolitic tuffs ($23.1{\pm}0.2Ma{\sim}22.97{\pm}0.13Ma$) and sedimentary rocks of the Yeonghae basin, and the Quaternary sediments. The Triassic Pinkish granites, Jurassic Changpo plutonic rocks and Fine-grained granites are newly defined plutonic rocks in this study. Miocene intrusive rhyolitic tuffs bounded by the Yangsan Fault, which was first discovered in the north of Pohang city, are believed to play an important role in the understanding of the Miocene volcanic activity and the crustal deformation history on the Korean Peninsula. It is confirmed that The NNE-SSW-striking Yangsan Fault penetrating the central part of the study area and branch faults are predominant in the dextral movement and cutting all strata except the Quaternary sediments.

• The KIPS Transactions:PartB
• /
• v.19B no.2
• /
• pp.123-126
• /
• 2012

This paper proposed a method to separate a liver into left and right liver lobes for simple and exact volumetry of the river graft at abdominal MDCT(Multi-Detector Computed Tomography) image before the living donor liver transplantation. A medical team can evaluate an accurate river graft with minimized interaction between the team and a system using this algorithm for ensuring donor's and recipient's safe. On the image of segmented liver, 2 points(PMHV: a point in Middle Hepatic Vein and PPV: a point at the beginning of right branch of Portal Vein) are selected to separate a liver into left and right liver lobes. Middle hepatic vein is automatically segmented using PMHV, and the cutting line is decided on the basis of segmented Middle Hepatic Vein. A liver is separated on connecting the cutting line and PPV. The volume and ratio of the river graft are estimated. The volume estimated using 2 points are compared with a manual volume that diagnostic radiologist processed and estimated and the weight measured during surgery to support proof of exact volume. The mean ${\pm}$ standard deviation of the differences between the actual weights and the estimated volumes was $162.38cm^3{\pm}124.39$ in the case of manual segmentation and $107.69cm^3{\pm}97.24$ in the case of 2 points method. The correlation coefficient between the actual weight and the manually estimated volume is 0.79, and the correlation coefficient between the actual weight and the volume estimated using 2 points is 0.87. After selection the 2 points, the time involved in separation a liver into left and right river lobe and volumetry of them is measured for confirmation that the algorithm can be used on real time during surgery. The mean ${\pm}$ standard deviation of the process time is $57.28sec{\pm}32.81$ per 1 data set ($149.17pages{\pm}55.92$).