• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.315-318
• /
• 1997

In terms of productivity, the speed of machining process has been increasing in most of engineering part. But the tapping process does not reach at enough level compared with other machining processes because of its complicate cutting mechanism. In the high speed tapping process, the one of important elements is tool monitoring system to prevent tool breakage. This paper describes tool monitoring system by acoustic emission(AE) in the tapping process. We used 2 types of AE sensors in this test. The one is commercial sensor which is used in other machining monitoring system like polishing and the other is a self-fabricated sensor for this test. In this test we purpose to find out the frequency of AE signal in tapping process and verify the possibility of applying AE sensor in in-process tapping monitoring system. Also grasp of characteristic of tapping process by AE signal is handled.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.348-352
• /
• 1992

At present, the manufacturing industry is in a process of great change of circumstances like meeting demands to involve a great variety of types and shorter product life and thus more flexible manufacturing. These changes cause the larger number of different tools and frequent tool changes, which lead to the considerable losses in productive time and the high amount of capital tied up in the tool area. In our country, for the most part, the individual tool are still being presetted according to a data sheet and the measured values are entered, output in a list manually or via punched tapes. This usually takes a considerable amount time and lead to a high error rate. This paper describes a computer controlled tool data management system combined with the bar code tool identification labeled on cutting tools.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.585-590
• /
• 2003

It analyzed the reinforcement effect according to reinforced period for FREP. It found that reinforcement effect of P-Type that was reinforced during the usage decreased compared to I-Type that was reinforced before the usage. So when reinforcing a existing structure that is being used, it should consider the stress that is produced due to the fixed load. It evaluated bending and shear of RC reinforcing beam based on the test and analytical conditions of this study. It found that stress concentration was concentrated due to rapid change of bending rigidity in reinforced cutting part as a result of excessive reinforcement thickness of FREP. It resulted in rip-off failure. It means that it should evaluate the shear when designing reinforcement.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.56-61
• /
• 2008

Cropping metal materials is widely used for feeding processes of various forming method, such as forging, extrusion, drawing, and upsetting. However, cropping has many weak points, which are material loss in part of cutting, chip creation, and much use of lubrication oil, etc. In this study, instead of cropping, a novel process is proposed to cut metal materials, especially stainless steel bar which is known very difficult to crop. Results of FE-analysis will be shown to verify the proposed method comparing with those of the conventional cropping process. Also, fitting products were successfully forged using the fabricated billet by the proposed process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.49-55
• /
• 2020

Studies on the optimizations of machining processes use two different methods. The first is feed control in real-time by spindle load in a machine tool. The second is feed scheduling in NC code control by material removal rate using a CAD/CAM system. Each approach possesses its respective merits and issues compared to the other. That is, each method can be complementary to the other. The purpose of the study is to improve the productivity of the bulkhead, an aircraft Duralumin structure. In this paper, acceleration or deceleration of cutting tool by spindle load data is achieved using adaptive feed control macro programming in a machine tool.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.221-226
• /
• 1999

It can be acquired the high effective productivity through of high speed, precision of machine tools, and then, machine tools will be got a competitive power. Industrially advanced countries already developed that the high speed feed is 50m/min using the high speed ball screw. Also, a lot of problems have happened the feed and servo drive system. It is necessary to study about the character of positioning accuracy, heat generation and high speed/accuracy control for feed/servo drive system of high speed/accuracy. In this study, we make use of high performance vertical machine center with a ball screw of large-scale-lead. Also, we'll apply the high-speed/accuracy control technology in this part of feedforward control, multi-buffering block size, etc. Using the design of the mechanical element and high-speed precision control, the basic design concept can be established.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.367-372
• /
• 2000

Accuracy of a machined component is determined by the relative motion between the cutting tool and the workpiece. One of the important factors which affects the accuracy of this relative motion is the geometric error of machine tools. In this study, geometric error is modeled using form shaping motion of machine tool, where a form shaping function is derived from the homogeneous transformation matrix. Geometric errors are measured by laser interferometer. After that, the local positioning error can be estimated from the form shaping model and geometric error data base. From this information, we can remodel the part by shifting the design surface to the amount of positional error. By generating tool path to the redesigned surface, we can reduce the machining error.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.2
• /
• pp.9-14
• /
• 1998

One of the areas in the continuous casting process that up to this point, has not been definitively instrumented is a method of reliably locating the part of a continuously cast strand that remains liquid for a period after the outer portion has solidified. To solve the problem. Electromagnetic Trandsducers(EMAT) which operate across an air gap without the need for a coupling medium has been developed. The system was designed to employ a through transmission technique which enhanced the signal-to-noise ratio. The Al 75$\times$75mm and 75$\times$100mm simulators with 2, 4, 8, 16, 32 mm hole respectively has been produced in order to verify the developed EMAT system and to measure to liquid core in continuous casting strand. The system developed can be employed for the optimization of torch cutting speed and for the final cut length of the bloom as well as calculation of average bloom temperature.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.369-374
• /
• 2004

Web-based analysis programs for reliability assessment of machine tools were developed in this study. First, the reliability data analysis program was developed to search for failure rate using failure data and reliability test data of mechanical part. Second, failure mode analysis was developed through performance tests like circular movement test vibration test for machine tools. This analysis program shows correlation between failure mode and performance test result. Third, tool life was predicted by correlation between flank wear and cutting time, using the extended Taylor tool life equation in turning data and the equivalently converted equation in order to apply ball endmill data to Taylor tool life equation in milling data. All the information related to input and result data can be stored in theses programs.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.12
• /
• pp.1153-1160
• /
• 2010

A circular plate is the main part of a circular saw blade, which is widely used in industrial cutting tools. In experiments using a circular saw containing slots, we observed that a number of natural frequencies are simultaneously emerged in specific frequency regions. The interesting phenomenon is called the frequency convergence. Effects of design parameters such as the number, the length and the width of slots, on the frequency-convergence phenomenon are analyzed by FEM simulations using ALGOR. The frequency-convergence phenomenon will be intensified when the number, length and width of slots increase.