• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.289-304
• /
• 1998

In Korean clothing industry, most of the manufactures produce garments by subcon-tractors partially or entirely. It is very often that the design part is remote from production part and there is miscommunication between these two parts resulting dissatisfaction to both. Therefore it is very important to communicate the manufacturing information clearly and quickly to produce garments exactly the design part intended. Also to automate the clothing out how to produce and use the information objectively and efficiently. As a first step of moving to automation, the purpose of the research is to find out how manufacturing information and data are communicated in clothing manufacturing at present. In order to follow the information flow of a cer-tain manufacturer, the case study method was used. The case study samples were 12 clothing firms of 13 brands. The results and suggestions are as follows :- 1. A manufacturing information is communicated through paper documents such as“Production Order”, sample and patterns. At present, a production order sheet is the most efficient communication media, which comprises most of the information being communicated. 2. A manufacturing information comprises control information on the product, design in-formation, pattern information, cutting information, material information, sewing information, production schedule information, quality control information, costing information and information about the subcontractors. 3. A manufacturing is not quite objective except pattern information and cutting information which is presented by CAD systems. The communication of design information and sewing information should be somehow more objective. 4. There is not much information from a subcontractor. Considering that a subcontractor is the other partener of the communication, more information from the subcontractor is required for both benefit. 5. A designer produce most of the manufacturing information, but the information is communicated through a production manager to the subcontractor. The difference between the information maker and information communicator can cause any miscommunication. In future automated manufacturing, it will be possible for the designer to communicate to the manufacturer directly from the early stage of designing.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.6
• /
• pp.807-815
• /
• 2015

The present study aimed at evaluating the intensity of Tifton 85 conditioning using a mower conditioner with free-swinging flail fingers and storage times on dehydration curve, fungi presence, nutritional value and in vitro digestibility of Tifton 85 bermudagrass hay dry matter (DM). The dehydration curve was determined in the whole plant for ten times until the baling. The zero time corresponded to the plant before cutting, which occurred at 11:00 and the other collections were carried out at 8:00, 10:00, 14:00, and 16:00. The experimental design was randomised blocks with two intensities of conditioning (high and low) and ten sampling times, with five replications. The high and low intensities related to adjusting the deflector plate of the free iron fingers (8 and 18 cm). In order to determine gas exchanges during Tifton 85 bermudagrass dehydration, there were evaluations of mature leaves, which were placed in the upper middle third of each branch before the cutting, at every hour for 4 hours. A portable gas analyser was used by an infrared IRGA (6400xt). The analysed variables were photosynthesis (A), stomatal conductance (gs), internal $CO_2$ concentration (Ci), transpiration (T), water use efficiency (WUE), and intrinsic water use efficiency (WUEi). In the second part of this study, the nutritional value of Tifton 85 hay was evaluated, so randomised blocks were designed in a split plot through time, with two treatments placed in the following plots: high and low intensity of cutting and five different time points as subplots: cutting (additional treatment), baling and after 30, 60, and 90 days of storage. Subsequently, fungi that were in green plants as well as hay were determined and samples were collected from the grass at the cutting period, during baling, and after 30, 60, and 90 days of storage. It was observed that Tifton 85 bermudagrass dehydration occurred within 49 hours, so this was considered the best time for drying hay. Gas exchanges were more intense before cutting, although after cutting they decreased until ceasing within 4 hours. The lowest values of acid detergent insoluble nitrogen were obtained with low conditioning intensity after 30 days of storage, 64.8 g/kg DM. The in vitro dry matter of Tifton 85 bermudagrass did not differ among the storage times or the conditioning intensities. There was no fungi present in the samples collected during the storage period up to 90 days after dehydration, with less than 30 colony forming units found on plate counting. The use of mower conditioners in different intensities of injury did not speed up the dehydration time of Tifton 85.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.5
• /
• pp.1074-1083
• /
• 1993

NC simulation has been used to replace the test cutting of NC machining. Although it can reduce the NC part programming effort, it still has a problem. If any error is found during the simulation, then the part has to be reprogrammed and it is time consumming. This paper presents a method for verifying and editing the NC code after the post-processing without going back to the part programming stage. A data structure and an algorithm to verify and edit the NC code interactively with the aid of graphics is introduced. Z-map method is used for the shaded image display and cross-sectional view display of the macined parts. The method was implemented in a IBM/PC-386 with MS-Windows software, and the multi-window function of the of the MS-Windows is used for the simultaneous editing and verification.

• Fashion & Textile Research Journal
• /
• v.13 no.2
• /
• pp.269-278
• /
• 2011

This study aims at setting up productive capacity which can be usefully utilized for work management of apparel manufacturers. So as to achieve this goal, an apparel manufacturing company which has been operated by miniline system in Seoul was selected. Standard time and man-hour were calculated to create the accurate productive capacity by observing and measuring a work flow included cutting, sewing and finishing processes. And the result is as following. The standard time for each process was presented as cutting process 47004.5s, sewing process 671050.5s and finishing process 22426.3s. And 15284.4ms was computed as total procession man-hour per day of the manufacturer which is organized of 16 people. Also, the procession man-hour for each process was revealed as cutting process 396.7ms(2.6%), sewing process 14509.3ms(94.9%) and finishing process 378.5ms(2.5%). +Surplus was found in the productivity for each process included the cutting process(outshell, lining and seam process), the sewing process(preparation and arrangement process) and the finishing process. But, additional man-hour 52436.18ms was required because the productive capacity was calculated as -surplus(-13.9%) in the sewing process(part and assembly process). Therefore, a work schedule was planned based on the previous result. However, loading can be ideal when a capacity and a load become '0'. The object company should find the way to reduce allowance(26.25%) of the sewing process through reconstruction of consciousness and improvement in functions with analyzing works of operators. Also, they need to consider an additional supplement of the personnel.

• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.329-337
• /
• 2001

This study was carried out to observe the changes of Oiji quality during fermentation by preparing the samples with various functional ingredients (Chinese pepper(Sancho), onion, pine leaves) exerting antimicrobial effect. The pH values of all experiment groups decreased significantly in proportion to the ripening period(P＜0.05). Control and Chinese pepper-added groups showed a rapid decrease in pH after 5 days of ripening, and Onion- and Pine leaves-added groups after 3 days of ripening. All experimental groups showed the lowest pH value at the 20th day of ripening. Rapid permeation of salt solution occured in all groups at the 3rd day of ripening. But the increase rate of salt permeation decreased gradually after 3 days of ripening. Lightness and redness in color decreased gradually in all groups, but the redness of Pine leaves-added group increased at the 30th day of ripening. Yellowness of control group was higher than that of others after 10 days of ripening(P＜0.05), and the yellowness of pine leaves-added Oiji was the lowest among all after 5 days of ripening(P<0.05). The maximum cutting force of raw cucumber was observed at stem end followed by blossom end and middle part, and the Oiji samples also showed the same order at the early stage of ripening. In general, maximum cutting force of minor ingredient-added Oiji was higher than that of control and maximum cutting force was decreased at the 30th day of ripening. Onion-added group showed the highest value among all at the 40th day of ripening. Chinese pepper-added group was ranked low, but onion- and pine leaves-added groups were ranked high in sensory evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2567-2572
• /
• 2014

In the present study, we aimed to obtain multi jig that PCB sheet with several PCB component can cut in a short time as to the Separation of PCB component. PCB supporter designed safely at the base frame and each model can be separable. it completed the neodium magnet for the fixing of the upper part laser transmission hole of the both. One of the development, the cutting working with one base frame which PCB component of various standard, fixing of module and bridge connected to PCB component could be possible. and it reduced the inconvenience which has to replace the base frame and PCB sheet fixed member. It compared to other press up about 70% of accuracy and a reduction in investment cost was about 400%.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.3
• /
• pp.165-171
• /
• 2023

The rotary joint connecting the upper and lower structures of construction machinery and special vehicles transmits hydraulic pressure as the shaft and housing rotate, and multiple seals are assembled to prevent oil leakage into the oil flow channel. Because the seal material is rigid and difficult to assemble, we sought a method to assemble it after cutting. The shapes of the cutting surface are L-shaped and / shaped, and the leakage standard when hydraulic pressure is applied is the contact pressure generated on the cutting surface. The structure and material of the seal are composed of a double elastomer, and nonlinear contact structural analysis is performed when only the high-rigidity PE material is cut. Studies have shown that the shorter the cutting length, the better the leakage prevention and the higher the possibility of leakage to the bottom surface where NBR and PE come into contact rather than the top surface where the PE and the housing come into contact.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.5
• /
• pp.758-765
• /
• 1999

Comparative studies of the effects of rates and frequency of application of dairy slurry on herbage yield and stand persistence of alfalfa and various forage grasses have not previously been conducted. The results being reported here are part of a larger study having a primary objective of comparing the effectiveness of alfalfa (Medicago sativa L.), various grasses and alfalfa-grass mixtures for utilizing nutrients from applied dairy slurry. The objectives of this part of the study were to evaluate the effects of various rates and frequencies of application of slurry on herbage yield and stand persistence of orchardgrass (Dactylis glomerata L.), reed canarygrass (Phalaris arundinacea L.), and alfalfa-orchanrdgreass and alfalfa-reed canarygrass mixtures managed as a 4-cutting management system. A randomized complete block design with treatments in a split plot arrangement with four replicates was used. The main plots consisted of 9 fertility treatments: 7 slurry rate and time of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The sub-plots consisted of the two grasses and two alfalfa-grass mixture mentioned above. Slurry was composed from stored solids scraped from the alleyways of a free-stall housing barn and water added to form a slurry having about 8% solids. Manure was pumped from a liquid spreader tank into 10.4 L garden water cans for manual application to the plots. Herbage yields within species were generally unaffected by various rates of application in the first production year. Herbage yields of grasses and alfalfa-grass mixtures the second year were generally not affected by frequency of application for the same rate of slurry applied. Slurry application resulted in greater herbage yield increases in grasses than alfalfa-grass mixtures in the 4-cutting management system. In general, herbage dry matter yields of grasses from the dairy slurry treatments equaled or exceeded yields from the inorganic fertilizer treatment. Stand ratings of grasses and alfalfa-grass mixtures were not changed by manure application rates. In this study, the highest rate of slurry ($967kg\;total\;N\;ha^{-1}$ in 1995 plus $2,014kg\;N\;ha^{-1}$ in 1996) was not detrimental to herbage yields or stand persistence of any of the species. It was concluded that applying dairy slurry to these cool-season grasses and alfalfa-grass mixtures managed in a 4-cutting system is an acceptable practice from the standpoint of herbage yield and satnd persistence and by doing so the utilization of inorganic fertilizers can be reduced.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.327-332
• /
• 2021

Materials used for education include SM20C, Al6061, and acrylic. SM20C materials are used a lot in certification tests and functional competitions as carbon steel, but they are also used in industrial sites. Al6061 is said to be a material that produces a lot of tools because it has lower hardness than carbon steel and is highly flexible. When practical guidance is given to students using acrylic materials, it is a material that causes vibration and tool damage due to excessive cutting. In this process, we examine how impact on the 5-axis equipment 2NC head can affect precision control. The weakest part of a five-axis equipment is the head that controls the AC axis. In the event of precision and cumulative tolerances in this area, the precision of all products is reduced. Thus, a key part of the 2NC head, the spindle housing was carried out using Al7075 T6 (U.S. Alcoasa) material and the entire body using FCD450 (spherical graphite cast iron). In the vibration and cutting process acting on these two materials, the analysis was carried out to determine the value of applying the force as a finite element analysis under extreme conditions. We hope that using these analytical data will help students see and understand the structure of 5-axis machining rather than 5-axis cutting.

• Journal of Trauma and Injury
• /
• v.36 no.1
• /
• pp.32-38
• /
• 2023

Purpose: This study aimed to identify the characteristics of patients injured by high-rotation cutting tools and the factors related to the severity of their injuries. Methods: Adult patients (≥18 years), who presented to the emergency department (ED) after a high-rotation cutting tool injury and who were registered in the Korean Emergency Department-based Injury In-Depth Surveillance (2011-2018) database, were included. Patients' demographic characteristics, injury-related factors, and Injury Severity Scores were collected. All included cases were categorized into two groups according to the tool that caused the injury: grinder versus nongrinder. The characteristics of the two groups were compared, and the factors associated with the severity of injuries were investigated. Results: Among 8,697 ED visits, 4,603 patients had been using a grinder and 4,094 had been using a nongrinder tool. The most frequently injured body part while using a grinder was the hand (46.4%), followed by the head (23.0%). While using a nongrinder tool, the most frequently injured body part was also the hand (64.0%), followed by the lower leg (11.4%). The odds of a severe injury were affected by patient age (odds ratio [OR], 1.024; 95% confidence interval [CI], 1.020-1.028) and using a grinder (OR, 2.073; 95% CI, 1.877-2.290). The odds of a severe injury using a grinder were higher in arm injuries (OR, 1.60; 95% CI, 1.40-1.83) and multiple-part injuries (OR, 1.998; 95% CI, 1.639-2.437). The odds of a severe injury using a grinder were lower for head injuries (OR, 0.481; 95% CI, 0.297-0.781). Conclusions: Injuries from grinders were more likely to affect the head and neck than nongrinder injuries, despite the lower severity. The current lack of regulations on grinders in occupational safety and health standards warrants relevant legislation and the development of applicable safety equipment.