• 한국의상디자인학회지
• /
• 제18권1호
• /
• pp.169-181
• /
• 2016

This study analyzed the characteristics and patterns of men's drawers panties to get basic data for their design. For this, drawers panties in 7 different brands (4: domestic brands, 3: imported brands) in terms of a front-center shape were collected, and the shape of men's drawers panties, characteristics of the materials, dimensions & type of patterns by the part and front-center patterns were analyzed. The study results found the followings: First, in terms of the shape of men's drawers panties, the front-center part were designed to rest the penis and scrotum in a natural and comfortable manner without a pee slit. They were seamless on the sides except for one product with side seams. Second, the drawer panties were made of elastic polyurethane materials. Specifically, domestic brand items used warm, elastic and durable nylon, polyester and rayon and polyurethanes while imported brands were mostly made of absorbent and sanitary polyurethanes. Third, regarding a size of drawer panties by part, imported brands were large in waist circumference. In terms of waist breadth at the front center, there was difference depending on an oval type. In addition, the front length at the front center differed by product, revealing difference in three-dimensional effect at the front center. The side length also differed greatly by product, which means that there might be a great difference in wear comfort. Fourth, in terms of the patterns of men's drawers panties, there was difference in side seams, center back seam and front-center patterns. Among a total of 7 products, only one product had side seams, and center back seams were found in two products only. Fifth, in terms of front-center patterns, the drawer panties can be divided into three types, creating three-dimensional effect not to give any pressure on the crotch: i) the cutting line only at the bottom of the front center part where the penis is rested, ii) puff created at the front center by adding a transverse line to the center line, iii) cutting transverse line to separate the penis from the testicles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.763-766
• /
• 2000

Rapid Prototyping(RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of parts due to layer-by-layer stackin, low build speed caused by line-by-line solidification to build one layer, and additional post processing to improve surface roughness, so it is required very high cost to introduce and to maintain RP apparatus. The objective of this study is to develop software for automatic generation of unit shape part (USP) for a new RP process, Variable Lamination Manufacturing using linear hotwire cutting technique and expandable polystyrene foam sheet as part material (VLM-S). In order to examine the applicability of the developed software to VLM-S, USP's of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.64-74
• /
• 1994

The gundrill is capable of machining for having large length to diameter ratio in single pass. The techniques of gundrill and gun boring began developing in the late 18th century with the need for more accurate bores in rifle, cannon, machinery part and marine part etc. The main feature of the gun drilling provides a stabilizing cutting force resultant necessary for self guidance of the drill head. A study of the accuracy and surface finish of holes produced would reveal quite useful information regarding the process. The thesis deals with the experimental results obtained during gun drilling on marine part materials for different machining conditions.

• 한국생산제조학회지
• /
• 제22권3_1spc호
• /
• pp.531-536
• /
• 2013

An automatic wax-ring manufacturing system for silk coating was developed, which consisted of a container, pallet with a cooling part, injection port, and removing device. The removing device is a system to load, lift, and cut the wax-ring, which is widelyused for various silk-coating industrial purposes. A novel removing device equipped with a water cooling circulation system is proposed in this paper. It has the benefit of easy control, as well as the convenience of loading and unloading without the use of other equipment. Three-dimensional modeling techniques were adopted to develop integrated functions for the automatic wax-ring manufacturing system, which made it possible to confirm the smooth integration/interface of each part and the system's interrelations with other manufacturing systems.

• 한국기계연구소 소보
• /
• 통권19호
• /
• pp.61-68
• /
• 1989

As the system monitoring technology become required in order to improve the system performance and the productivity, we’ve studied to the detection for the tool wear and the tool breakage using AE sensors that is able to detection of generated high frequency stress pulse at cutting. The detection system is consist of a sensing part, a amplifier part, a signal processing part, and a analysis & output part. The moment (a rms and a kurtosis) of statistical method is used for analysis of AE singnal. The experiment are carried out in a CNC lathe. In this study, we achieved that the amplitude level of the AE signal and statistical moments was largely changed as the tool failure. The change rate of Kurtosis was especially large, but the change rate of the rms was small.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.22-26
• /
• 2011

A numerical simulation on the flow field was carried out on the cylindrical shell with baffles. The steady incompressible 3-D Navier-Stokes solution is obtained with the actual operational condition and geometry of the heat exchanger. The effect of the location of inlet and outlet on the cylindrical shell with baffle is investigated by varying flow rate. The angle between the location of In/Outlet and baffle cutting part is $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, $90^{\circ}$, $120^{\circ}$, $150^{\circ}$ and $180^{\circ}$. The present results show that the pressure drop is dependent on Reynolds number in the inlet area and position of inlet and outlet; i.e., the pressure drop increases with increasing Reynolds number and the pressure drop decreases with increasing angle between baffle cutting part and position of inlet and outlet.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.529-530
• /
• 2006

Manufacturing industry is changing rapidly. Prototyping with rapid manufacturing is a part of every business in many companies and prototypes are used efficiently as a part of the production development process. Sheet metal forming has traditionally been a technology area where prototyping has been extremely expensive and efficient options for low volume have been limited. This paper describes the process for incremental sheet forming technologies to make the prototype for a brake dust shield of vehicles, which includes the remodeling method to make a base mold and tool path for sheet metal forming and 5-axes laser cutting machine to trim the prototype product.

• Design & Manufacturing
• /
• 제10권2호
• /
• pp.50-54
• /
• 2016

In the semiconductor industry the final products were checked for several environments before sell the products. The burning test of memory and chip was implemented in reliability for all of parts. The memory and chip were developed to high density memory and high performance chip, so circuit design was also high integrated and the test bed was needed to be thin and fine pitch socket. LGA(Land Grid Array) IC socket with thin wall thickness was designed to satisfy this requirement. The LGA IC socket plastic part was manufacture by injection molding process, it was needed accuracy, stiffness and suit resin with high flowability. In this study, injection molding process analysis was executed for 2 and 4 cavities moldings with runner, gate and sprue. The warpage analysis was also implemented for further gate removal process. Through the analyses the total deformations of the moldings were predicted within maximum 0.05mm deformation. Finally in consideration of these results, 2 and 4 cavities molds were designed and made and tested in injection molding process.

• 한국약용작물학회지
• /
• 제13권3호
• /
• pp.77-80
• /
• 2005

2002년 6월 26일, 8월 3일 및 9월 4일에 당년 발생한 덩굴에서 정부 중부 기부의 2마디씩 채취하여 삽목하였고, 2002년 7월 10일에 삽수의 마디수를 $1{\sim}4$개로 달리하여 삽목하여 겨울딸기의 발근 및 신초생육을 조사한 결과는 다음과 같다. 발근율은 8월 2일 삽목구에서 69.6%로 가장 높았고 근장은 6월 26일 삽목구에서 23.1 cm로 가장 길었다. 9월 4일 삽목구의 발근율 및 신초 생육이 현저히 떨어졌다. 삽수 채취 부위별 발근율은 덩굴 중간부위에서 55.4%로 가장 높았으며 그 다음이 정단부위에서 45.6%이었고 기부에서 25.4%로 가장 낮았다. 다른 형질들은 삽수 채취부위에 따른 차이가 없었다. 발근율과 신초발생률은 삽수마디수에 따른 차이가 없었으나 삽수당 근수 및 뿌리 건물중, 신초 생육은 삽수마디수가 많을수록 증가되었다.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.1-9
• /
• 2002

This study describes the geometric characteristics and the 5-axis machining method in order to make end mill cutter coming with insert tips. End mill geometry is consisted of flute part and insert tip part. Flute part modeled by using ruled surfaces with constant helix angle, and insert tip part modeled by rectangular planes containing tapped hole of specified direction in its center. In this study, the modeled insert tip part considered both of a radial rake angle and a axial rake angle, because they were important cutting conditions. In order to machining the virtual end mill defined from geometric characteristics, we programmed a special software to machining the end mill considered in this study. This software can generate NC-codes about following processes, end milling or ball end milling of flute part end milling of rectangular plane, centering of hole, drilling of hole, and tapping of hole. Ant sampled end mills were modeled and machined on 5-axis CNC machining center with two index tables. Since machined end mills were very agreeable to designed end mills, we saw that the method proposed in this study can be very useful for manufacturing of end mill body with insert tip.