• Design & Manufacturing
• /
• 제13권3호
• /
• pp.41-47
• /
• 2019

In conventional machining, the use of cutting fluid is essential to reduce cutting heat and to improve machining quality. However, to increase the performance of cutting fluids, various chemical components have been added. However, these chemical components during machining have a negative impact on the health of workers and cutting environment. In current machining, environment-friendly machining is conducted using MQL (minimum quantity lubrication) or cryogenic air spraying to minimize the harmful effects. In this study, the injection nozzle that can combined injecting minimum quantity lubrication(MQL) and cryogenic gas was designed and the shape optimization was performed by using computational fluid dynamics(CFD) and design of experiment(DOE). Performance verification was performed for the designed nozzle. The diameter of the sprayed fluid at a distance of 30 mm from the nozzle was analyzed to be 21 mm. It was also analyzed to lower the aerosol temperature to about 260~270K.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.385-388
• /
• 1997

As the environmental regulations become stricter, new machining technologies are being developed which takes envi ronmenta 1 aspects into account . Since cut t ing oi I has some impact on environment. many researches are being carried out to minimize the use of cutting oi I. The methods for minimizing cutting oil usage includes the following techniques: I ) Cooling of tools and work piece. 2) Useage of compressed cooling air for the removal of chip. 3) Minimal useage of environment-friendly vegetable cutt:ngoiI for lubrication between chip and tools. Since the turning machine is continuous, tools are under constant thermal load and tool wear increases as the lubricative performance degrades. Also surface roughnesses have a direct influence on turning. In order to examine the characteristics of turningmachining, this work investigates experimentally the degree of tool wear and characteristics of surface roughness in relation to machining conditions, supply methods, and cooling methods.

• 생물환경조절학회지
• /
• 제21권4호
• /
• pp.385-391
• /
• 2012

국내에서 육성된 딸기 품종인 '매향' 및 '설향'을 대상으로 비가림 포트 육묘 시 런너의 절단 시기에 따른 자묘의 생육과 정식 후 수량을 2작기(2009년 및 2010년)에 걸쳐 검토하였다. 자묘는 정식일(2009년 9월 11일 및 2010년 9월 10일)을 기준으로 30일, 20일, 10일 및 5일 전에 모주로부터 런너를 절단하였다. 런너의 절단 시기가 늦을수록 모주에서 양수분이 육묘 후기까지 자묘로 공급되어 지상부 생체중, 관부직경 및 엽록소 함량은 증가하는 경향을 보였다. 반면에 근중 등 지하부 생육은 런너의 절단 시기가 빨라서 모주로부터 자묘의 독립 기간이 길수록 증가하였다. 모주에서 런너를 절단한 경우의 관수 요구량이 런너를 절단하지 않은 처리구에 비하여 29.7% 증가하였다. 또한, 런너를 절단하였을 경우에 런너를 통하여 탄저병이 침입한 경우가 런너를 절단하지 않은 처리구에 비하여 37.6% 높게 나타났다. 정식 후 정화방의 출뢰 및 개화 개시기는 런너 절단 시기가 늦을 경우 2~3일까지 지연되었으나 런너 절단 시기에 따른 조기 수량의 차이가 없으므로 런너 절단 시기를 정식일의 5~10일 전인 8월 하순 이후로 늦추어 실시하는 것이 탄저병 발생 경감 측면에서는 유리한 것으로 생각된다.

• 정보과학회 논문지
• /
• 제43권3호
• /
• pp.346-352
• /
• 2016

어업에서는 분류와 가공작업에 많은 작업자가 필요할 뿐만아니라 실제 현장의 작업들이 대부분 수작업으로 진행되고 있다. 이러한 이유로 작업량과 안정성의 향상을 위해 작업장에서는 자동화 시스템이 필요하다. 본 논문에서는 지느러미 절단 자동화 시스템을 위해서 RANSAC(RANdom SAmple Consensus) 기반 지느러미 절단선 검출 기법을 제안한다. 지느러미 절단선 검출을 위해 먼저 하이패스필터(high pass filter)를 이용하여 윤곽선을 검출한 뒤 잡음필터의 파라미터와 임계값을 조절하여 몸통과 지느러미의 경계를 검출한다. 그리고 RANSAC을 이용해 최적의 지느러미 절단선을 검출한다. 제안한 기법으로 가자미 50여 마리의 샘플에 대해서 실험한 결과 약 90%의 절단선 검출 정확도를 보였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.458-468
• /
• 1996

The Oil Palm industry has developed tremendously with the increasing of planted area from 54,000 hectaresin 1960 to about 2.28 million hectares in 1995. This is expected to increase further to 2.5 million hectares by the year 2000. However, there has been an increasing difficulty in obtaining sufficient labour for the oil palm plantations. At present , harvesting of oil palm fresh fruit is facing an acute shortage of workforce as the workers are much more attracted to the better working environment and salary in the industrial sector. Harvesting of short palm is easily done by using a chisel attached to a short steel pole. Cutting is done by moving the tool at high speed to the target. The weight of the tool coupled with the speed of throwing will produce enough energy to cut the bunch stalk. In this cutting method, sharpness of the cutting device, weight of tool and the speed of throwing contribute to the efficiency of the tool . For the tall palms, a sickle attached to a ong pole is used and the job is more difficult compared to the short palms. Lifting of pole and cutting jobs require great effort and skills. This paper describes the basic design needs in developing an appropriate device that is practical for field use. A prototype design was developed and tested.

• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1043-1050
• /
• 2020

Radioactive aerosols are produced during the cutting of contaminated and activated metals. They must be collected and removed by a high-performing filtration system before releasing to the environment from the decommissioning workplace. The filtration system requires regular replacement to ensure the sufficient removal of radioactive aerosols because its filtration efficiency gradually decreases. This study evaluates the efficiency and lifetime of filters while cutting metals by using a plasma arc cutter. Particularly, this study considers the aerodynamic diameter distribution of number and mass concentrations for aerosols from 6 nm to 10 ㎛ when evaluating the performance of filters. After 20 time reuses for cutting operation performed in a cutting chamber, the removal efficiency is reduced from over 99 to below 93% at 2 ㎛. The results are used to analyze the lifetime of filters, the frequencies of their replacements, and impact on internal radiation dose.

• Journal of Forest and Environmental Science
• /
• 제38권4호
• /
• pp.249-255
• /
• 2022

The study was conducted to establish a method for the proliferation of hybrid poplar (P. alba × P. glandulosa) clone Bongwha1, an excellent biomass species. It was found that to collect the cuttings of Bonghwa1, it was necessary to use the main stem rather than the axillary branch. Stem growth by green-wood cuttings showed a tendency to decrease as the length of the collected cuttings increased, but the survival rate was low. Therefore, modified leafy stem cutting was attempted to increase the survival rate of the cuttings. In the modified leafy stem cutting method, 4 leaves were included in the cuttings, and especially, cuttings were performed using cuttings containing 2-4 cm xylem parts. Leafy stem cutting increased root growth and the number of stems, as well as the survival rate of hybrid poplar clone Bongwha1 compared to green-wood cuttings. The root growth of the leafy stem cutting poplar was better as there was more xylem part. Using two-year-old nursery stocks, the leafy stem cutting was used to produce about 66 cuttings. This study is expected to contribute to the mass propagation of high-quality nursery stocks.

• 생물환경조절학회지
• /
• 제16권2호
• /
• pp.146-150
• /
• 2007

돌나물의 가을 삽목번식을 위한 적정 삽목용토와 삽목시기를 조사하기 위하여, 농가에서 손쉽게 구할 수 있는 밭흙, 강모래와 훈탄을 혼합한 삽목용토의 효과를 조사하였다. 밭흙과 모래를 1:1 또는 2:1(v/v)로 혼합하여 사용하는 것이 활착, 지상부 생육 및 뿌리발달이 양호하여 경제적이었다. 선발된 삽목용토(밭흙:모래=2:1) 를 이용하여 $10{\sim}5cm$ 간격으로 가을 노지삽목을 실시한 결과, 9월 초중순에 하는 것이 뿌리 및 지상부 생육이 양호하고, 월동전 충분한 rosette를 확보 할 수 있어 안정적이었다. 따라서 가을 노지삽목 한계기는 9월 20일로서, 삽목시기가 늦을 경우, 이듬해 봄철 적정 수량을 확보를 위하여 삽수의 수량을 25-30% 늘려 밀식재배하는 것이 바람직하다.

• 생물환경조절학회지
• /
• 제23권4호
• /
• pp.288-292
• /
• 2014

클레마티스의 경삽에 의한 삽목번식이 잘 되지 않는 7-8월의 영양번식방법으로 수삽의 가능성을 알아보기 위해 실험을 수행하였다. 수삽시 적정한 삽수길이 및 발근제 처리효과에 대해 알아보기 위해 클레마티스 '호노라'의 1마디 삽수와 2마디 삽수를 NAA $0.1mg{\cdot}L^{-1}$에 처리하였다. NAA $0.1mg{\cdot}L^{-1}$ 처리구는 삽수길이에 관계없이 100% 발근되었지만, 무처리구는 1마디, 2마디 삽수 각각 약 30%와 19%로 발근율이 현저히 낮았다. 뿌리수, 뿌리길이도 NAA $0.1mg{\cdot}L^{-1}$ 처리구가 우수하였고, 그 효과는 1마디 삽수에서 더 크게 나타났다. '호노라' 수삽의 결과를 바탕으로 2013년 클레마티스 '파이루'의 1마디 삽수를 이용하여 NAA(0, 0.1, 0.5, $1.0mg{\cdot}L^{-1}$) 처리농도에 따른 발근율을 비교 하였다. 발근소요일수는 약 70-74일로 약 10주가 소요되었고 농도에 따른 유의한 차이는 없었다. 하지만 발근율은 NAA 처리농도가 높을수록 높았으며, NAA $1.0mg{\cdot}L^{-1}$ 처리시 약 90% 발근되었다. 전반적인 뿌리의 생육은 NAA $0.5mg{\cdot}L^{-1}$ 이상의 농도에서 향상되었다. 하지만 '파이루'는 NAA를 처리하지 않아도 76%이상 발근되는 것으로 보아 '호노라'보다 수삽에 의한 번식이 용이한 품종으로 생각된다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.309-310
• /
• 2002

A minimal quantity lubrication (MQL) machining is able to achieve both functions of cooling and lubrication with an extremely low quantity of a cutting fluid and a large amount of air blow. Using a biodegradable ester oil, turning tests were carried out to evaluate the effectiveness of the MQL system. It was found that the performance of MQL cutting was equivalent to, or better than, that of conventional cutting, because the MQL system tends to prevent the heat damage of the tool tip and, if an effective lubricant such as a particular polyol ester is applied to the system, it can avoid the extensive transfer of workpiece materials on to the tool surface.