• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.637-642
• /
• 2010

Pre-treatment steps of fresh produce as Saengshik raw materials are followed by initial clean-up, dipping, primary washing, and cutting. Hypochlorous acid solution was applied in the dipping step to reduce natural microflora. Also, procedures were changed by cutting, dipping and then primary washing, and the efficacy of hypochlorus acid was evaluated. Potatoes, carrots, kales, and angelicas were submerged in water or 100 ppm of hypochlorous acid for 5 min. After initial clean-up, the aerobic plate counts of potatoes, carrots, kales and angelicas were 4.7, 5.3, 5.6, and 5.7 log CFU/g, respectively. When samples were submerged into water, it only reduced the population of natural microflora by 0.2 to 1.1 log CFU/g, whereas when treated with hypochlorous acid, it reduced the population by 0.5 to 2.8 log CFU/g. Reductions of natural microflora in green leafy vegetables were more highly achieved than bulbs such as potatoes and carrots. However, the numbers of natural microflora were increased after cutting step. To control the cross contamination at the cutting process, the process was changed as follows: initial clean-up, cutting, dipping in hypochlorous acid, and then primary washing. It showed effective reduction of the population by 2.3 to 3.2 log CFU/g. Hypochlorous acid solution could be useful as a sanitizer for surface washing of fresh vegetables.

• Korean journal of communication and information
• /
• v.73
• /
• pp.7-34
• /
• 2015

This study attends to the effects of political entertainment as a newly emerging television genre on citizens' political talk. Particularly, this study suggests audience involvement and political information efficacy as key psychological factors that mediate the relationship between political entertainment and political discussion. More specifically, audience involvement was deemed as a conclusive concept that consists of such sub-dimensions as audience identification and parasocial interaction with program characters and transportation into the messages. Among 317 participants in an online survey, a total of 273 subjects, who had at least some viewing experience with political entertainment TV programs, were included in the final analysis. According to the findings, softer programs that piggyback political information on top of their entertainment content were more likely to increase viewers' identification and transportation. The viewer experience of identification further heightened the level of political information efficacy, which in turn positively contributed to one's willingness to participate in political talk and to hear the other side. It also appeared that political information efficacy significantly mediated the relationship between political entertainment viewing and political talk.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.2
• /
• pp.138-146
• /
• 2021

Objectives: This study aims to compare and evaluate the reduction efficiency of disinfectants used in the domestic meat processing industry to reduce bioaerosol exposure of meat industry workers and to use this as basic data for establishing work environment management measures. Methods: Thirteen disinfectants sold in South Korea were selected for evaluation and the bacterial reduction effect of the disinfectants was investigated. Bacterial suspension and surface disinfection tests were conducted to compare and analyze the antibacterial strength of the disinfectants. Pork carcasses, cutting boards, benches, and conveyor belts were selected for surface sterilization tests. Results: As a result of the bacterial suspension experiment test, all disinfectants had a bacterial reduction efficiency of more than 86%. Among them, the bacterial reduction efficiency of chlorine disinfectants was 99.93% on average. In the results of the pork carcass surface sterilization test, the rate of reduction of disinfectants made of quaternary ammonium compounds (QACs) was the highest. Tests of plastic cutting boards showed that chlorine disinfectants had the best sterilization effect. Experiments on stainless steel benches showed the best bacterial reduction efficiency for chlorine dioxide and QACs disinfectants. In the conveyor belt made of urethane, QACs disinfectants showed excellent sterilization effects. Conclusions: The study evaluated the disinfection power of disinfectants against bacteria occurring in domestic meat processing plants. All disinfectants were found to be effective in bacterial suspension experiments, and chlorine disinfectants were particularly effective. In surface sterilization experiments, sterilizing agents with QACs as the main ingredient were excellent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1716-1729
• /
• 2010

In this paper, we deal with a hierarchical ring-mesh optical network design problem. The objective is to minimize the total cost of optical add-drop multiplexers (OADMs) handling intra-ring traffic, optical cross-connects (OXCs) handling inter-ring traffic, and cabling cost among OADMs and among OXCs, while satisfying intra-ring and inter-ring capacities. We develop an integer programming (IP) formulation for the problem and devise some cutting planes that partially break the symmetry of rings. Dealing with the inherent computational complexity of the problem, we devise an effective heuristic procedure that finds a good quality feasible solution within reasonable computing times. Computational results demonstrate the efficacy of the proposed solution procedure; the developed symmetry breaking inequalities significantly reduce the computing time to find an optimal solution for small size problems, and the heuristic procedure finds a better feasible solution than that CPLEX, a commercial optimization software, finds for large size problems.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.315-326
• /
• 2023

The design principles and implementation of rebar lap splice in architectural structures are governed by building regulations. Nevertheless, the minimization of rebar-cutting waste (RCW) is often impeded by the mandatory requirements pertaining to the rebar lapping zone as prescribed in design codes. In real-world construction scenarios, compliance with these rules often falls short due to hurdles concerning productivity, quality, safety, time, and cost. This discrepancy between code stipulations and on-the-ground construction practices necessitates an academic exploration. The goal of this research was to delve into the effect of rebar lap splice placement on the robustness and constructability of building edifices. The study initially took on a review of the computation of rebar lapping length and the rules revolving around the lapping zone. Following this, a structural robustness and constructability examination was undertaken, focusing on adherence to the lap splice zone. The interpretations and deductions of the research led to the following insights: (1) the efficacy of rebar lap splice is not solely contingent on the moment, and (2) the implementation of rebar lap splice beyond the specified zone can match the structural integrity and robustness of those confined within the designated area. As a result, the constraints on the rebar lapping zone ought to be revisited and possibly relaxed. The conclusions drawn from this research are anticipated to reconcile the disconnect between building codes and practical construction conditions, furnishing invaluable academic substantiation to further the endeavor of achieving near-zero RCW.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.1085-1094
• /
• 2010

In these day, the recession of economics and cutting-off jobs makes increases of start-up business. The unprepared start-up business which lacks sufficient information and knowledge should fall. For successful start-up business, the effective education program should be necessary. This study reviews factors such as learning motivation, entrepreneurial intention, education satisfaction, self-efficacy affecting the performance of short-term education program. This study establishes hypothesis and verifies them. To verify the hypothesis, this study explores factors affecting the performance of short-term entrepreneurial education program through utilizing factor analysis, and structural equation modeling. We suggest that the results of the study could be utilized as followings; First the results of study could be used to establish policy which improves the performance of short-term entrepreneurial education program. Second, the identified factors help educator to established the curriculum of the short-term entrepreneurial education program. Third, the identified factors could be established as criteria to recruit the applicants who wants to received short-term entrepreneurial education program.

• The Plant Pathology Journal
• /
• v.16 no.4
• /
• pp.200-205
• /
• 2000

Biological control of blue stain fungi, such as Ophiostoma and Leptographium spp., that reduce the quality of logs and cause economic losses in wood product industry, was carried out in laboratory and field trials by a colorless strain of Ophiostoma quercus, BSFcs-1. Inoculation of pine wood chips with the colorless strain 1 wk before inoculating wild-type strain demonstrated that BSFcs-1 colonized wood chips and excluded blue stain fungi from being established. Efficacy of BSFcs-1 was compared with colorless strain of O. piliferum, which is commercially available under the trade name of Cartapip. Inoculation of pine wood logs with the colorless strain 1 wk before inoculating wild-type strain of blue stain in isolated wood chips, while O. quercus and O. floccosum colonized 0% and 17%, respectively. Simultaneous inoculation of logs with the colorless and wild-type strains resulted in decreased colonization (28%) by BSFcs-1, but increased colonization by O. quercus (185) and O. floccosum (29%). On the other hand, BSFcs-1 and wild-type strain alone colonized 75% and 71%, respectively. Treatment of the surface of log ends with mycelial suspension of BSFcs-1 after cutting also showed good control of blue stain fungi in a pine forest stands.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.133-144
• /
• 2022

Fast-paced industrial and agricultural development generates large quantities of hazardous heavy metals (HMs), which are extremely damaging to individuals and the environment. Research in both academia and industry has been spurred by the need for HMs to be removed from water bodies. Advanced materials are being developed to replace existing water purification technologies or to introduce cutting-edge solutions that solve challenges such as cost efficacy, easy production, diverse metal removal, and regenerability. Water treatment industries are increasingly interested in activated carbon because of its high adsorption capacity for HMs adsorption. Furthermore, because of its huge surface area, abundant functional groups on surface, and optimal pore diameter, the modified activated carbon has the potential to be used as an efficient adsorbent. Metal-organic frameworks (MOFs), a novel organic-inorganic hybrid porous materials, sparked an interest in the elimination of HMs via adsorption. This is due to the their highly porous nature, large surface area, abundance of exposed adsorptive sites, and post-synthetic modification (PSM) ability. This review introduces PSM methods for MOFs, chemical modification of activated carbons (ACs), and current advancements in the elimination of Pb²⁺, Hg²⁺, and Cd²⁺ ions from water using modified MOFs and ACs via adsorption.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.1
• /
• pp.32-39
• /
• 2024

This study evaluated the additive impact of ethylenediamine tetraacetic acid (EDTA) on erythrosine-mediated photodynamic therapy (PDT) against Streptococcus mutans (S. mutans) biofilm by measuring colony-forming units and applying confocal laser scanning microscopy. Fifty-six bovine incisors, free from dental caries or structural defects, were utilized in this study. Dentin specimens were created by cutting with a low-speed diamond disk under a continuous flow of water, resulting in dimensions of 6.0 mm × 3.0 mm × 2.0 mm. The specimens were categorized into 4 groups: Control, EDTA, PDT, and EDTA + PDT. S. mutans ATCC 25175 was employed to establish biofilm on the dentin specimens. A 17% EDTA solution was applied for 1 min. For PDT, erythrosine served as the photosensitizer. Finally, a light-emitting diode source (385 - 515 nm) was employed in this study. The PDT group exhibited a significantly lower bacterial count than both the control and EDTA groups (p < 0.001). The EDTA + PDT group demonstrated a significantly reduced bacterial count compared to the other 3 groups (p < 0.001). This study demonstrated that EDTA enhances the antimicrobial efficacy of PDT on S. mutans biofilm. Even at a low concentration of photosensitizer, the combination of EDTA and PDT yields a significant antibacterial effect.

• Journal of Trauma and Injury
• /
• v.19 no.2
• /
• pp.121-125
• /
• 2006

Purpose: There is ongoing demand to deliver better procedural training to medical students in the emergency department. Thus, we studied the efficacy of a cadaver-based training model for teaching simple suture techniques to medical students. Methods: We investigated ten fourth-year medical students, who were rounding and being trained in the Emergency Department of Chungnam National University Hospital. They were educated with slides about a simple suture technique for 30 minutes to evaluate the efficacy of the cadaver-based training model. We prospectively measured their skill by administering a test on the cadaver-based simple suture technique in 3cm sized linar wound separately to each of them. Results: A total of ten fourth-year medical students completed the investigation. The tension, the direction of suture, the degree of cleanness, the number of sutures, the adequacy of the cutting thread length, and the suturing time in the first attempt were compared with those in the second one. The second results were compared with those in the third one, and the third results were compared with those in the fourth one. All the results had statistical significance. Conclusion: These findings support the value of the cadaver-based simple suture technique training model as a medical student teaching model. The cadaver-based simple suture technique teaching model is a good way of teaching several medical skills to medical students.