• 한국태양에너지학회 논문집
• /
• 제39권3호
• /
• pp.9-17
• /
• 2019

Laser cutting cell of solar cells can achieve high voltage and efficiency through more array than conventional 6 inch cell compared to same area. In this study, we fabricated c-Si cutting cell with various lasers and laser conditions such as power, speed, and number of times. In the case of picosecond laser, excellent surface characteristics were obtained due to small surface defects and low thermal damage at the output of 20W and the speed of 100 mm/s. However, it is not possible to fabricate a cutting cell having good characteristics due to nonuniform cutting inside the wafer when the processing for forming a cutting cell is not sufficiently performed. For nanosecond lasers, the best wafer characteristics were obtained for fabrication of excellent cutting cells at a frequency of 500 kHz and a laser speed of 100 mm/s. However, the nanosecond laser has not been processed sufficiently in the condition of a number of times. As a result, it was confirmed that the wafer thickness was cut by $63{\mu}m$ of the cell thickness of $170{\mu}m$ in the condition of five times of laser process. It was found that more than 30% of the wafer thickness had to be processed to fabricate the cutting cell. After cutting the 6-inch cell having the voltage of 0.65 V, we obtained the voltage of about 0.63 V.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권2호
• /
• pp.81-93
• /
• 2006

Obstructive sialadenitis is one of common disease in salivary gland, and most common histologic features are loss of acinar cell and ductal dilatation associated with fibrosis, and infiltration of inflammatory cells. Although many experimental studies has been accomplished for the salivary acinar cell change in obstructive salivary gland disease, studies for myoepithelial cell were deficient. This study is designed for salivary gland tissue change, especially myoepithelial cell when nonspecific chronic sialadenitis or salivary duct injury by duct obstruction or cut can be occurred that is common encounted clinically. After ligation and cutting of submandibular gland of rabbit, groups of aminmal were sacrificed at 1, 2, 4 weeks postoperatively, submandibular gland were removed. The histopathologic evaluation was done with light microscopy. And, with immunohistochemical staining with ${\alpha}$-smooth muscle actin, characteristics of myoepithelial cell were examined. With transmission electron microscopy, ultrastructure of myoepithelial cell were examined for distribution and ultrastructure of myoepithelial cell. The results were obtained as follows: 1. In the histopathologic evaluation, ligation and cutting group of 1 week, linkage of myoepithelial cell associated with acinar atrophy and degeneration were disappeared in both group. 2. More prominent squamous metaplasia was seen in acinar cells of ligation group of 2 weeks experimental rabbit than cutting group. 3. Acinar cells are nearly disappeared in both ligation and cutting group of 4 weeks, and myoepithelial cell also disappeared associated with acinar cell atrophy, and duct-like structure composed by squamous cells by squamous metaplasia in acinar cells were distributed. 4. In immunohistochemical study, both ligation and cutting group ${\alpha}$-SMA distribution were diminished at 1 week experimental rabbits, but myoepithelial cell was more diminished in ligation group than cutting group, which were distributed around cells of squamous metaplasia. 5. Nuclear condensation, chromosome margination, and cytoplasmic vaculoation were appeared in myoepithelial cell of both cutting and ligation group after 1 week with transmission electron microscopy. But degenerative substance were seen in cytoplasm of myoepithelial cell of ligation group of 4 weeks. From the results obtained in this study, atrophy and degeneration of myoepithelial cell was more prominent in duct ligation group than duct cutting group, and myoepithelial cells were seen around cells squamous metaplasia of acinar cell.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.133-140
• /
• 2001

This paper suggests another system for a cutting force measuring tool in a milling process. Generally, tool dynamometer is taken into account for the most appropriate cutting force measuring tool in the analysis of cutting mechanism. However, high price and limited space make it difficult to be in-situ system for controllable milling process. Although an alternative method using AC current of servo-motor has been suggested, it is unsuitable for cutting force control because of small upper frequency limit and noise. The cutting force measuring system is composed of two load cells placed between the moving table bracket and the nut flange part of ballscrew. It has many advantages such as low cost and wide range measurement than tool dynamometer because of the built-in moving table and the low cost load cell. The static and dynamic model of the measuring system using imbeded load cell is introduced. Various Experiments are carried out to validate both models. By comparing the cutting forces from a series of end milling experiments on the tool dynamometer and the system developed in this paper, the accuracy of the cutting force measuring system is verified. Upper frequency limit is measured by the experiment of dynamic characteristics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.651-654
• /
• 2001

In the dismantling process of nuclear spent fuels, the spent fuel rod cutting process, followed immediately by the decladding process, performs the cutting the spent fuel rods to a proper length for fast decladding operation. In this paper, we analyzed the chemical compositions, mechanical properties, and physical characteristics for SUS and zircaloy tubes in order to identify the feasibility of cutter-blade type in cutting SUS and zircaloy tubes. It is considered that material, shape and angle, and heat treatment for fabricating the highly durable cutter blade and also it is investigated that the round-shape sustenance of cross-section, amount of debris production, and fire occurrence for measuring the cutting performance on SUS and zircaloy tubes, spent fuel rod cutting device is designed to be operated automatically through the remote control system for use in Hot Cell(radioactive) area and the electro-driven mechanical parts are modularized for easy maintenance. Results from various experiments confirm the efficiency of this device.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.295-299
• /
• 2018

In this work, we conducted a study on cell strings of high efficiency and high power solar cell modules via simulation. In contrast to the conventional module manufacturing method, the simulation was performed by connecting cutting cells divided into four parts from 6-in size using the electrically conductive adhesive (ECA). The resistance of the ECA added in series connection was extracted using an experimental method. This resistance was found to be $3m{\Omega}$. Based on this simulation, we verified the change in efficiency of the string as a function of the number of cutting cell connections. Consequently, the cutting cell efficiency of the first 20.08% was significantly increased to 20.63% until the fifth connection; however, for further connections, it was confirmed that the efficiency was saturated to 20.8%. Connecting cutting cells using ECA improves the efficiency of the string; therefore, it is expected that it will be possible to fabricate modules with high efficiency and high power.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.595-598
• /
• 2000

This paper presents new cutting force measuring system for milling process. Usually, tool dynamometer is the most appropriate measuring tool in an analysis of cutting mechanism. High price and limited space, however, make it difficult to be in-situ system for controllable milling process. Although an alternative using AC current of servomotor has been suggested, it is unsuitable for cutting force control because of low bandwidth and noise. We suggest new cutting force measuring system, using two load cell placed between moving table and nut of ballscrew, and modelled on the system statically and dynamically. And to verify the accuracy of the proposed system, a series of carefully conducted experiments were carried out. Experiment results show that models are in reasonably good agreement with the experiment data.

• 한국식품과학회지
• /
• 제38권2호
• /
• pp.237-240
• /
• 2006

다시마(Laminaria japonica)를 기능성 식품소재로 활용하기 위한 예비단계로, 다세포의 다시마를 미립자의 single cell detritus(SCD)로 분해하는 해양세균을 해수, 다시마(Laminaria japonica), 미역(Undaria pinnatifida), 성게(Anthocidaris crassispina), 불가사리(Acanthaster planci), 소라(Batillus cornutus)로부터 분리하였다. 분리한 71개의 균주 중 다시마 조체의 연화능과 알긴산 분해활성을 동시에 가지는 균주는 14개이었으며, 균주 No. 34가 가장 강한 다시마 조체의 연화능과 알긴산 분해활성을 나타내었다. 균주 No. 34는 배양 15일 만에 다세포의 다시마를 미립자의 SCD 형태로 분해하였으며, 그 크기는 $5-10{\mu}m$이었다. 균주 No. 34는 vibrio sp.으로 동정되었으며, Vibrio sp. YKW-34로 명명하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권9호
• /
• pp.749-755
• /
• 2016

본 연구에서는 고가의 3-D 로드셀을 대체하기 위해 1축 압축 로드셀 배열을 사용한 새로운 픽 커터 3축 절삭력 측정방법을 제안하였다. 제안한 절삭력 측정방법은 4개의 1축 압축 로드셀과 숄더 볼트를 통해 기계적 구속을 만들어 3축 절삭력을 측정할 수 있다. 유한요소해석을 통해 제안한 새로운 절삭력 측정방법을 타당성을 확인하였으며, 최종적으로 실제 선형 암반절삭 시험을 통해 제안한 새로운 측정방법의 3축 힘 측정 정확도를 확인하였다. 시험 결과 새로운 절삭력 측정방법은 상대오차가 약 6% 이내이므로, 기존의 3-D 로드셀을 대체할 수 있음을 확인하였다. 더불어, 기존 고가의 3-D 로드셀 대비 약 20-30%의 비용만으로 구축 가능하므로 절삭력 측정에 사용되는 비용을 크게 줄일 수 있다.

• 현장농수산연구지
• /
• 제12권1호
• /
• pp.39-45
• /
• 2010

본 연구는 Dianthus spp와 Coreopsis spp의 삽목시기와 용토, Plug 규격이 생육 및 발근 상태에 미치는 영향을 구명하고자 실시하였다. Dianthus spp와 Coreopsis spp 두 품종 모두 삽목 시기가 늦어질 수록 발근율과 발근 수가 낮아졌다. 5월 20일에서 8월20일 삽목 처리구에서는 두 품종 모두 90% 이상 발근하였으나 9월 20일 삽목한 처리구에서는 Dianthus spp와 Coreopsis spp 두 품종이 각각 87%와 82%의 저조한 발근율을 보였고 발근 수 역시 9월 20일 처리구가 가장 저조하였다. 또한 Dianthus spp와 Coreopsis spp 두 품종 모두 모래를 제외한 모든 용토에서 90%이상 발근되었고 peatmoss(1)+perlite(1) 혼합용토에서 발근수가 가장 많았다. Coreopsis spp는 plug 162공에서 발근율이 98%로 가장 높았고 Dianthus spp는 162공과 200공에서 각각 발근율이 95.8%와 96%로 높고 근권부 형성율이 좋았다.

• Current Photovoltaic Research
• /
• 제11권1호
• /
• pp.34-37
• /
• 2023

Solar energy had become the main energy industry of renewable energy along with hydroelectric power generation. One of the technologies that contributed to the popularization of photovoltaic power and the decrease in the unit price of photovoltaic modules was the large-area solar cell. However, as the area increased, the light receiving area increased and the current value increased accordingly. Since power loss occurs when the current value was large, the number of busbar was increased to increase the current collection rate, and a technology to lower the current value through half-cutting was developed. The bus bar of the solar cell served as a passage through which the generated current was transmitted. This was because when the number of busbar decreases, the moving distance of electrons increased, so the amount of power generation decreases and when it increases, shadows occured. An important aspect of the electrode design was the optimal balance of these busbars and number of fingers. Therefore, in this study, the characteristics of the solar cell according to the number of front bus bars of the large-area solar cell were simulated using Griddler 2,5 pro. After selecting the number of busbar with the best characteristics, the difference was compared by varying the number of fingers and a better direction for the number of cutting was presented.