• Computers and Concrete
• /
• v.20 no.4
• /
• pp.429-437
• /
• 2017

In this study, the effect of the tensile strength and ratio of disc spacing to penetration depth on the efficiency of tunnel boring machine (TBM) is investigated using Particle flow code (PFC) in two dimensions. Models with dimensions of $150{\times}70mm$ made of rocks with four different tensile strength values of 5 MPa, 10 MPa, 15 MPa and 20 MPa were separately analyzed and two "U" shape cutters with width of 10 mm were penetrated into the rock model by velocity rate of 0.1 mm/s. The spacing between cutters was also varied in this study. Failure patterns for 5 different penetration depths of 3 mm, 4 mm, 5 mm, 6 mm, and 7 mm were registered. Totally 100 indentation test were performed to study the optimal tool-rock interaction. An equation relating mechanical rock properties with geometric characteristics for the optimal TBM performance is proposed. The results of numerical simulations show that the effective rock-cutting condition corresponding to the minimum specific energy can be estimated by an optimized disc spacing to penetration depth, which, in fact, is found to be proportional to the rock's tensile strength.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.2
• /
• pp.23-31
• /
• 2021

Surface texturing is a promising route to reduce the friction forces between two surfaces in sliding contact. To this end, the fabrication of micro dimples is one of the most widely used surface texturing methods. According to published results, textured surfaces with elliptical micro dimples offer the best friction performance. Therefore, we fabricated elliptical micro dimples on carbon steel (SM45C) by using dual frequency vibration assisted machining. High and low frequencies of 16.3 kHz and 230 Hz were applied to the 3D resonant elliptical vibrator. The 3D resonant elliptical vibrator with a triangular cubic boron nitride insert was assembled on a computer numerically controlled turning lathe. Oval micro dimples of various profiles were manufactured on carbon steel. In terms of the profile of the elliptical micro dimples, the experimental results indicated that the average micro dimple width and depth were 112 ㎛ and 7.7 ㎛. These dimensions are closely related to the cutting conditions and can be easily controlled.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.777-784
• /
• 2015

This study verified the correlations between vegetation factors, such as the number of individual species and species diversity, and soil factors in Chamaecyparis obtusa (CO) stands in Jeollanam-do. Also, the site environmental factors that affect the annual growth of CO ring width were analyzed. Positive correlations were found between the species diversity index and Cation Exchange Capacity (CEC), available phosphate, and exchangeable $K^+$ (P<0.01). In addition, strong positive correlations were also found between the number of species that appeared in the study site and CEC, available phosphorus, exchangeable $K^+$ and exchangeable $Mg^{2+}$ (P<0.01). Tree ring growth showed strong correlations with the nutrient holding capacity and fertility of soil, including available phosphate, exchangeable $K^+$, CEC, and electrical conductivity (P<0.01). The explanatory variables of tree ring growth in CO were composed of exchangeable $K^+$, organic matter content, and soil pH. The regression model had a high level of explanatory power, 74.4%. In this model, the annual growth of CO ring width increased when exchangeable $K^+$ and organic matter content were higher but decreased when soil pH was lower. According to the analysis, it is found that the annual growth of CO ring width was significantly affected by soil fertility, including available phosphate, exchangeable $K^+$, CEC, and electrical conductivity. In addition, the soil fertility of CO stands seems to be significantly affected by the supply of fallen leaves from the understory vegetation of CO.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.103-110
• /
• 2018

This study was conducted to investigate the optimum irrigation method for propagation of cutting strawberry ($Fragaria{\times}ananassa$ Duch. cv. Maehyang) plantlet in summer season. The cutting strawberry plantlets were planted in 24-cell tray ($60{\times}34{\times}10cm$) filled with commercial mixed medium (Tosilee) and placed in semi closed-type small plastic tunnel. Each semi closed-type small plastic tunnel was treated as follows; control (non-treatment), over head irrigation (twice a day), capillary mats irrigation (twice a day), or fog irrigation (30 minutes turn on and 10 minutes off from 8:00 to 18:00). The strawberry plantlets were rooted during 8 days in the semi closed-type small plastic tunnel, and then plastic film was removed. Growth parameters, such as plant height, root length, number of primary roots, petiole length, leaf length, leaf width, crown diameter, SPAD, leaf area, fresh and dry weights of the shoot and root, were measured at 61 days after cutting. Relative humidity in tunnel was high in the order by fog irrigation, over head irrigation, capillary mats, and the control as 72.5, 56.3, 45.8, and 29% on average, respectively. However, the air temperature was similar in all treatments. On the 4 and 8 days, the rooting rate of strawberry plantlet was significantly higher in the over head irrigation and fog irrigation treatments. Plant height, petiole length, crown diameter, and leaf area were highest in the over head irrigation and fog irrigation treatments. In addition, fresh and dry weights of shoot were greater in over head irrigation and fog irrigation treatments than the others. Dry weight of root was differed significantly heaviest in the fog irrigation treatment. However, root length, no. of primary roots, SPAD value, and fresh weight of root were not significantly different in all treatments. These results indicated that growth and rooting for propagation of cutting strawberry plantlet 'Maehyang' were best achievement in the over head irrigation and fog irrigation treatments.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.179-186
• /
• 1998

This experiment was conducted to study on forage utility of Diplachne fusca L. which live in reclaimed saline land of midwest region of Korea The secondary experiment was conducted to know on growth characteristics, forage yield and forage value of Diplachne fusca L. in order to get a necessary data on possible utilization of native plant as a forage crop and practical use of reclaimed saline land. The results obtained are summarized as follows; 1. The growth of Diplachne fusca L. was neary finished at heading stage. So plant height, leaf length, leaf width, stem diameter, tillering number, fresh weight and dry weight per plant were 137.5cm, 42.6cm, 4.65mm, 2.48mm, 15.3 tiller, 44.68 and 15.3g respectively. 2. Fresh weight was the highest with 4,460kg/10a at heading stage, dry weight was 1,530kg/10a at heading stage and 1,630kg/10a at 20 day after heading. The fresh weight was significantly difference between cutting height level according to cutting time, but total fresh weight was not significantly difference between cutting height level. Total dry weight was significantly difference between cutting height, so it was a large yield at cutting height of 10cm. 3. The contents of crude protein, available protein, digestible protein and TDN were the range of 12.3~3.7%, 12.3~3.7% 10.8~3.6% and 65.2~60.7% according to growth stage, respectively. The highest yield of crude protein, available protein, and digestible protein were showed at heading stage, that of TDN showed at 20 day after heading. The contents of ADF and NDF were the range of 36.4~50.0% and 62.7-80.5% according to growth stage. 4. The contents of P, Ca, K and Mg were the range of 0.31~0.20, 0.70~0.52, 1.74~1.28 and 0.19~0.18% according to growth stage, respectively. The highest yield of P, Ca and K was showed at heading stage, that of Mg showed at 20 day after heading. 5. The contents of ENE, NEL, NEM and NEG were the range of 1.42~1.29, 0.68~0.62, 0.68~0.61 and 0.40~0.35 McaVlb according to growth stage, respectively. The highest yield of ENE, NEL, NEM and NEG was showed at 20 day after heading by inuease after heading. 6. The grasseating ratio of Diplachne fusca L. of before and after heading by milk cattle was 96.5% and 95.3%, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.4 no.1
• /
• pp.93-95
• /
• 1968

The importance of leaf area as related to transpiration and photosynthesis is generally recognized. In general, a compound leaf of soybean consist of one main leaflet and two side leaflets from each node of the stem. Takahashi and Fukuyama (1919) classified soybeans into three types, namely the long leaf type, round leaf type, and intermediate type, in which the last one had round leaves at the base and long leaves in the upper part of the stem. Nagai (1925) and Takahashi (1935). dealt with the genetics of the leaf form and association with other characters. The closely relationships, the correlation coefficients from 0.64 to 0.73, were shown between the leaf area and the soybean yield in the experiments by Nagai (1942). Nagata (1950) also tested the varietal differences of the variation of leaf length and its ratio to the leaf width on the nodes of stem, and finally divided varieties into five types. Three methods of measuring area of strawberry leaves were used by Darrow (1932). The first involved determining a factor to be used with length or length ${\times}$width measurements. The second method involved placing leaves on pieces of cardboard of known area cut to the shape of the leaves. Direct use of the planimeter on intact leaves was Darrow's third method. Miller (1938) enumerated several methods to determine the leaf surface area in plants, some of which were extremely laborious and required removing leaves from plants. They included tracing outlines of leaves on paper and measuring the enclosed area with a planimeter or cutting out the traced areas and comparing the weights obtained with the weight of a known paper. Another method involved placing the form of the leaf on sensitized paper with the area being determined by measuring or weighing as above. Miller further stated that the photoelectric cell can also be utilized to estitmate leaf area. Working with field beans, Davis (1940) found that 0.004517 (length ${\times}$ width) of the center leaflet was the most nearly accurate of four methods attempted. A simple procedure to measure leaf area in corn was devised 1 y Montgomery (1911) and used by Kiesselbach (1950). The formula was length ${\times}$ width ${\times}$ 0.75. Stickler et al. (1961) have successfully used length times width ${\times}$ 0.747 to estimate area of grain sorghum leaves. Bhan and Pande(1966) has also used length ${\times}$ width ${\times}$ 0.802 to determine leaf area of rice varieties. The main objectives of the present investigation were to develop an accurate, rapid method to determine leaf area in soybean varieties and to examine certain data associated with leaf area determinations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.255-261
• /
• 2020

This study was undertaken to evaluate the growth, body shape and carcass cutting yield traits of Duroc (D) and crossbred (Duroc×Pietrain×Pietrain; DPP) pigs. A total of 147 D and 101 DPP pigs were used for analyzing the growth trait, whereas 16 D and 16 DPP pigs were evaluated for carcass yields. Backfat thickness (BF) and average daily feed intake (ADFI) were significantly higher in D (14.07±0.24 mm, 2,101 g) than in DPP (12.69±3.25 mm, 1,909 g) (p <0.001). Moreover, D exhibited significantly higher body shape traits including body height (BH), chest depth (CD) and chest width (CW), as compared to DPP pigs (p <0.001). No differences were observed for body length (BL) between the two strains. Analysis of the carcass cutting yield traits determined for D and DPP were in the order: ham (HM; 31.17% and 33.43%), belly (BY; 23.40% and 19.55%), and picnic shoulder (PS; 16.54% and 16.87%), respectively. Then, HM showed a difference of 2.26% P with D(31.17%) and DPP(33.43%), while BY showed a difference of 3.85% P with D(23.40%) and DPP(19.55%). Taken together, our results indicate that DPP has a better feed efficiency than D, and therefore has the potential to increase the production of low-fat pork, targeting consumers having a high preference who have opted for a healthy lifestyle. These results can be used as basic data for developing an ideal pig breed.

• Asian Journal of Turfgrass Science
• /
• v.9 no.4
• /
• pp.293-316
• /
• 1995

Nitrogen fertilization and cutting practice were studied on turfgrasses and cover plants to investigate the possibility of maintaining green color during the growing season. Research also involved the effect of the nitrogen on a few morphological characteristics of leaf performance elements which might give an information to coloration and life-span of turf leaves. Treatments in the first experiment undertaken on pot included one N level: 350kgN /ha applied as compound fertilizer in split applications of one-half in mid-May and the rest both in late June and August, and four spring-summer cuts: late May, late June, late July and late August. The soil filled in pot a moderately well-drained sandy loam. In the second experiment(field observation) leaf length and width, inflorescence and flowering, and color performance were also investigated. With nitrogen fertilizer applied on turfs, desirable turf color was maintained during a period of poor coloration in specific seasons such as mid-summer for cool season grasses and late fall for warm season grasses comparing to the non-treatment. However, this was not stimulated by cutting treatment to nitrogen status existed. Cutting effect on coloration was more remarkable in both Korean lawngrass and Manilagrass than in cool season turfgrasses such as Italian rye-grass, perennial ryegrass and tall fescue. Especially down-slide of leaf color in cool season turfgrasses could he detected in mid-summer /early fall season ranging up to mid-September. In early November as well as mid-September, Italian ryegrass, perennial ryegrass and tall fes-cue retained a high level of green color as followed by nitrogen application and cutting treatment, and little detectable variation of leaf color notation between cool season turfgrasses was obtained. However, Korean la'vngrass and Manilagrass failed to retain the green color until early November. Color notations in cool season turfgrasses investigated early November on the final date of the experiment ranged from 5 GY 3/1 to 4/8 in 'Ramultra' Italian ryegrass, 'Reveile' perennial ryegrass and 'Arid' tall fescue, but those in Zoysiagrasses were 7.5 YR 4/8 in Korean lawngrass and 2.5 y 5 /6 in Manilagrass. Life-span of leaves was shorter in Italian ryegrass, perennial ryegrass and tall fescue than in beth Korean lawngrass and Manilagrass with and without nitrogen application. In general, leaves appeared in early May had a long life-span than those appeared in late April or mid-June. Nitrogen application significantly prolonged the green color retaining period in perennial ryegrass, Italian ryegrass, Korean lawngrass and Manilagrass, and this was contrasted with the fact that there was no prolonged life-span of leaves emerging in early May and mid-June in tall fescue. SPAD reading values in 48 turfs and cover plants investigated in the field trial were increasing until late June and again decreasing till September. Increasing trends of reading value could be observed in the middle of October in most of grasses. On the other hand, clovers and reed canarygrasses did not restore their color values even in October. Color differences between inter-varieties, and inter-species occurred during the growing season under the field condition implicated that selection of species and /or cultivars for mixture should be taken into consideration. In Munsell color notation investigated in the final date in the middle of November, 32 cultivars belonged under the category of 5 GY and 10 cultivars under the category of 7.5 GY. This was implying that most of cool season turfs and cover plants grown in the center zone of Korean Peninsula which are able to utilize for landscape use can bear their reasonable green color by early or mid-November when properly managed. The applicable possibilities of SPAD readings and Munsell color notation to determine the color status of turfgrasses and cover plants used in this study were discussed.

• The Journal of Engineering Geology
• /
• v.17 no.1 s.50
• /
• pp.101-113
• /
• 2007

A landslide was occurred due to soil cutting for construction to expand the Donghae express highway in Dong-hae-City, Korea. The total area of the landslide was about $9,550m^2$ with 100 m of width and 87m of height. The landslide was occurred due to the internal factor of the unstable geological structure including the clay layer and the external factor of continuous heavy rainfalls. As the result of field instrumentation during the landslide, the horizontal displacement of the slope ground increases with increasing the accumulated rainfall by continuous rainfall during the rainy season. Also, the depth of sliding failure was decided by the horizontal displacement distribution during landslide occurrence. It makes sure that the horizontal displacement starts from the depth of sliding failure and the depth of sliding failure matches well with the location of the clay layer. As the slope stability analysis using Bishop's Simplified Method at the landslide area, the safety factor of slope during the rainy season was 0.53. This safety factor of slope was enough to trigger the landslide at this area. The depth of sliding failure obtained by analytical method matches well with the depth of the clay layer.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.18 no.4
• /
• pp.73-85
• /
• 1991

Rhododendron mucronulatum for. albiflorum, native species is a shrub that has white flowers on May to June, and rare species endangered by people's rash digging or cutting. But its physiological ecological characteristics and propagation method are not being known at all. Therefore, this study was executed to utilize this species as the planting material for landscaping by analysing its habitat environment and growth form, and also experimenting its seed and vegetative propagation, and it field culture and utilization. The results are as follows; 1. The elevation, gradient and direction of this species were 295-1,350m, 10-36$^{\circ}$, northwest respectively. It was found that the species is shade-liking plant that grows under forest cover of average 51.33%. 2. The soil pH and water content of its habitat were 5.4, 25.41% respectively. The organic matter content was 6.29% that was higher than 3.2%, the average organic matter content of forest soil in Korea. 3. Representative plant community within which this species was living was Quercus mongolica community, and its main neighboring species were Lindea obtusiloba, Fraxinus sieboldiana, Rhus trichocarpa, Rhododendron Schlippenbachii, Rododendron mucronulatum. 4. The leaf length and width of this species were 39.18mm, 12.60mm respectively. This result showed that generally its leaf size was larger than that of R. micranthum, R. yedoense var. poukhanense and R. mucronulatum var. ciliatum and smaller than that of R. mucronulatum and R. schlippenbachii. 5. The whole size of its pollen was, as 59${\times}$61$\mu\textrm{m}$, the largest of plants of Rhododendron family including R. mucronulatum and R. mucronulatum var. ciliatum. 6. The result of seed germination experiment at intervals of 5$^{\circ}C$ from 15$^{\circ}C$ to 30$^{\circ}C$ presented the highest germination rate of 94.7% at 20$^{\circ}C$ numerically, but high percent germination at all temperature levels without significant difference. And the seed of this plant proved to be sun-liking seed at requiring dormancy in germination. 7. Through seed germination experiment by treatment of growth regulators such as GA. Thiourea and Kinetin under dark condition, it was found that the effect of GA treatment on germination increase and acceleration was the highest. 8. In greenwood cutting, rooted rate by treatment of various concentration of IBA and NAA on clay and vermiculite bed was not wholly high, but 100ppm plots of both IBA and NAA of clay bed showed relatively good rooted rate. 9. As result of field culture experiment for finding out optimum growth temperature and light intensity, growth conditions such as height, number of leaves, fresh weight and chlorophyll contents were the best at night/day temperature of 20/25$^{\circ}C$ and under 1/2sun. Also, the photosynthetic rate was the highest at 25$^{\circ}C$. Accordingly, it was found that optimum temperature and light intensity for growth of this plant are 25$^{\circ}C$ (day temperature), 50% of natural light respectively.